Soil Stabilisation and Slab Lifting

There are products

Products to compare


Description:
Properties:
Applications:
Downloads:

Talk to a specialist ...

MC-Injekt GL-95

Swelling, flexible, waterproofing acrylate gel sealant for injection in concrete, masonry and foundation soil

MC-Montan Injekt FR

Injection resin for the sealing and consolidation of rock, foundation soil and civil engineering structures

MC-Injekt 2700

Rigid sealing injection resin for concrete, masonry and foundation soil

MC-Montan Injekt FS

Injection resin for the sealing and consolidation of rock, foundation soil and civil engineering structures

MC-Injekt 2700 L

Rigid sealing injection resin for concrete, masonry and foundation soil

MC-Montan Injekt CB

Injection resin for consolidating and sealing rock and soils as well as for setting and lifting concrete slabs

MC-Montan Injekt FF

Injection rigid foam for filling cavities, for consolidating and sealing foundation soil and rock

MC-Montan Injekt FN

Injection resin for the sealing and consolidation of rock, foundation soil and civil engineering structures

MC-Montan Injekt DS

Ductile-elastic, durable sealing injection resin of rock, foundation soil and civil engineering structures

MC-Montan Injekt LE-S

Expansion resin for consolidation, load-bearing capacity increase and sealing of foundation soil as well as for lifting of structures

MC-Montan Injekt TR-X

Swelling, flexible, waterproofing acrylate gel sealant for injection in rock and solid structures

MC-Montan Injekt CI

Injection resin for consolidation and sealing of rock and loose stoneas well as for injection with cement suspension in the hybrid method

MC-Montan Injekt LE-S 60

Optimal density, expansion resin for soil stabilization, load bearing capacity increase, jacking of structures and sealing against heavy water ingress

MC-Montan Injekt LE-S 100

High density, expansion resin for soil stabilization, load bearing capacity increase, jacking of structures and sealing against water flow

[{"id":"fc11c86af62da69e8f9ef42726ba5755","name":"MC-Injekt GL-95","short_description":"Swelling, flexible, waterproofing acrylate gel sealant for injection in concrete, masonry and foundation soil","description":"Multi-component, particularly low-viscosity, aqueous injection resin based on acrylate, with variable reaction time up to approx. 90 s. The reaction product is swellable and highly elastic. For swellable waterproofing in permanently damp building components made of concrete or masonry. Suitable for injection into building ground.\n","areas_of_applications":"<ul>\n<li>Swelling flexible filling sealant for cracks and cavities in permanently damp concrete and masonry<\/li>\n<li>Subsequent vertical sealing of masonry<\/li>\n<li>Subsequent formation of a horizontal barrier\/DPC in masonry<\/li>\n<li>Injection of waterproofing membrane into interstitial spaces between buildings<\/li>\n<li>Injection of waterproofing membrane into foundation soil (curtain injection)<\/li>\n<\/ul>","properties":"<ul>\n<li>Very low-viscosity acrylic-based hydrogel<\/li>\n<li>Very good injectability<\/li>\n<li>Readily controllable injection path propagation thanks to controllable reaction time<\/li>\n<li>Very low application temperature<\/li>\n<li>Reliable sealing\/waterproofing due to high elasticity and good swelling capacity<\/li>\n<li>Durably water-impermeable in moist media<\/li>\n<li>General building authority approval issued by DIBt for injection into soil and groundwater<\/li>\n<li>Fulfils the UBA (German environmental agency) guidelines for sealants in contact with potable water<\/li>\n<li>High chemical resistance especially in highly alkaline environments<\/li>\n<li>REACH exposure: water contact permanent, inhalation periodic, processing and application<\/li>\n<li>Environmental Product Declaration EPD<\/li>\n<\/ul>","categories":[{"key":"injection-systems","text":"Injection Systems"},{"key":"injection-systems","text":"Injection Systems"}],"groups":[{"key":"structural-injections","text":"Structural injection"},{"key":"soil-stabilisation-slab-lifting","text":"Soil Stabilisation and Slab Lifting"}],"url":"injection-systems\/structural-injections\/mc-injekt-gl-95.html"},{"id":"67cd8c615eb362c7178b98baae439ab9","name":"MC-Montan Injekt FR","short_description":"Injection resin for the sealing and consolidation of rock, foundation soil and civil engineering structures","description":"Two-component injection resins based on polyurethane, with a variable reaction time between 25 seconds and 1 hour, for the tough-elastic sealing and consolidation of mountains and soil as well as for setting and lifting concrete slabs and roadways.","areas_of_applications":"<ul>\n<li>Sealing and consolidation of rock, subsoil and structures in special-purpose civil engineering and tunnel construction<\/li>\n<li>Waterproofing of trench\/pit enclosures<\/li>\n<li>Stabilising of foundation subsoil against the risk of ground failure<\/li>\n<li>Increasing the load-bearing capacity of subsoil under floor slabs and foundations<\/li>\n<li>Sealing and reinforcing cracks, joints and cavities in structures made of concrete, masonry, natural stone, etc.<\/li>\n<\/ul>","properties":"<ul>\n<li>Low-viscosity polyurethane-based duromer resin<\/li>\n<li>Good injectability<\/li>\n<li>Variable reactivity control<\/li>\n<li>Water-displacing<\/li>\n<li>Limited foaming on contact with water (rigid foam)<\/li>\n<li>High compressive and tensile strength<\/li>\n<li>Permanently watertight<\/li>\n<li>Can be combined with cement suspension (hybrid injection)<\/li>\n<li>Corresponds to fire class B2 according to DIN 4102 in the injection medium format<\/li>\n<li>No lasting effects on soil and groundwater according to DIBt test criteria<\/li>\n<li>REACH exposure: Water contact permanent, inhalation periodic, processing and application<\/li>\n<li>Environmental Product Declaration EPD<\/li>\n<\/ul>","categories":[{"key":"tunnelling-systems","text":"Tunnelling Systems"},{"key":"injection-systems","text":"Injection Systems"},{"key":"injection-systems","text":"Injection Systems"}],"groups":[{"key":"subsoil-injection-and-sealing","text":"Subsoil injection and sealing"},{"key":"soil-stabilisation-slab-lifting","text":"Soil Stabilisation and Slab Lifting"},{"key":"tunnel-injections","text":"Tunnel injections"}],"url":"tunnelling-systems\/subsoil-injection-and-sealing\/mc-montan-injekt-fr.html"},{"id":"2cb3966be0479c0f897941a55731d137","name":"MC-Injekt 2700","short_description":"Rigid sealing injection resin for concrete, masonry and foundation soil","description":"Two-component, low-viscosity polyurethane-based injection resin. Very short reaction time of approx. 30 s. When cured in a dry environment, the reacted resin is viscoplastic with high strength. MC-Injekt 2700 reacts with water to form a rigid foam and achieves an up to 10-fold increase in volume with unhindered expansion. For the force-fit sealing injection of concrete, reinforced concrete or masonry, subsoil from 0.2 mm crack width. Suitable for injection into subsoil and groundwater.","areas_of_applications":"<ul>\n<li>Sealing and reinforcing of cracked and void-rich structures made of concrete, masonry and natural stone in building construction, civil engineering, hydraulic engineering and general civil engineering<\/li>\n<li>Sealing of construction pit enclosures<\/li>\n<li>Consolidation of foundation soil in special foundation engineering<\/li>\n<li>Increasing the load-bearing capacity of the building site under floor slabs and foundations<\/li>\n<li>Sealing of rigid joints in buildings<\/li>\n<\/ul>","properties":"<ul>\n<li>Low-viscosity polyurethane-based duromer resin<\/li>\n<li>Good injectability<\/li>\n<li>Variable control of reactivity<\/li>\n<li>Water-displacing<\/li>\n<li>Limited foaming on contact with water (hard foam)<\/li>\n<li>Durable water impermeability<\/li>\n<li>High compressive and tensile strength<\/li>\n<li>Corresponds to fire class B2 according to DIN 4102 in the injection medium<\/li>\n<li>REACH exposure: water contact permanent, inhalation periodic, processing and application<\/li>\n<li>Environmental Product Declaration EPD<\/li>\n<\/ul>","categories":[{"key":"injection-systems","text":"Injection Systems"},{"key":"injection-systems","text":"Injection Systems"}],"groups":[{"key":"structural-injections","text":"Structural injection"},{"key":"soil-stabilisation-slab-lifting","text":"Soil Stabilisation and Slab Lifting"}],"url":"injection-systems\/structural-injections\/mc-injekt-2700.html"},{"id":"fdc044384e0f96f9e9440529332186e3","name":"MC-Montan Injekt FS","short_description":"Injection resin for the sealing and consolidation of rock, foundation soil and civil engineering structures","description":"Two-component polyurethane-based injection resin for non-positive reinforcement. Long working time of approx. 40 min. Suitable for viscoplastic sealing and consolidation of rock and soil as well as for fixing and lifting concrete slabs and roadways. Suitable for injection into subsoil and groundwater.","areas_of_applications":"<ul>\n<li>Sealing and consolidation of rock, subsoil and structures in special-purpose civil engineering and tunnel construction<\/li>\n<li>Waterproofing of trench\/pit enclosures<\/li>\n<li>Stabilising of foundation subsoil against the risk of ground failure<\/li>\n<li>Increasing the load-bearing capacity of subsoil under floor slabs and foundations<\/li>\n<li>Sealing and reinforcing cracks, joints and cavities in structures made of concrete, masonry, natural stone, etc.<\/li>\n<\/ul>","properties":"<ul>\n<li>Low-viscosity polyurethane-based duromer resin<\/li>\n<li>Good injectability<\/li>\n<li>Variable reactivity control<\/li>\n<li>Water-displacing<\/li>\n<li>Limited foaming on contact with water (rigid foam)<\/li>\n<li>High compressive and tensile strength<\/li>\n<li>Permanently watertight<\/li>\n<li>Can be combined with cement suspension (hybrid injection)<\/li>\n<li>Corresponds to fire class B2 according to DIN 4102 in the injection medium format<\/li>\n<li>No lasting effects on soil and groundwater according to DIBt test criteria<\/li>\n<li>REACH exposure: Water contact permanent, inhalation periodic, processing and application<\/li>\n<li>Environmental Product Declaration EPD<\/li>\n<\/ul>","categories":[{"key":"tunnelling-systems","text":"Tunnelling Systems"},{"key":"injection-systems","text":"Injection Systems"},{"key":"injection-systems","text":"Injection Systems"}],"groups":[{"key":"subsoil-injection-and-sealing","text":"Subsoil injection and sealing"},{"key":"soil-stabilisation-slab-lifting","text":"Soil Stabilisation and Slab Lifting"},{"key":"tunnel-injections","text":"Tunnel injections"}],"url":"tunnelling-systems\/subsoil-injection-and-sealing\/mc-montan-injekt-fs.html"},{"id":"da5025c6273846b491338a355e43577e","name":"MC-Injekt 2700 L","short_description":"Rigid sealing injection resin for concrete, masonry and foundation soil","description":"Two-component, low-viscosity injection resin based on polyurethane. Reaction time approx. 100 min. When cured in a dry environment, the reacted resin is viscoplastic with high strength. It reacts with water to form a rigid foam and achieves an up to 10-fold increase in volume with unhindered expansion. For the force-fit sealing injection of concrete, reinforced concrete or masonry, building ground from 0.2 mm crack width. Suitable for the injection of subsoil.","areas_of_applications":"<ul>\n<li>Sealing and reinforcing of cracked and void-rich structures made of concrete, masonry and natural stone in building construction, civil engineering, hydraulic engineering and general civil engineering<\/li>\n<li>Sealing of construction pit enclosures<\/li>\n<li>Consolidation of foundation soil in special foundation engineering<\/li>\n<li>Increasing the load-bearing capacity of the building site under floor slabs and foundations<\/li>\n<li>Sealing of rigid joints in buildings<\/li>\n<\/ul>","properties":"<ul>\n<li>Low-viscosity polyurethane-based duromer resin<\/li>\n<li>Good injectability<\/li>\n<li>Variable control of reactivity<\/li>\n<li>Water-displacing<\/li>\n<li>Limited foaming on contact with water (hard foam)<\/li>\n<li>Durable water impermeability<\/li>\n<li>High compressive and tensile strength<\/li>\n<li>Corresponds to fire class B2 according to DIN 4102 in the injection medium<\/li>\n<li>REACH exposure: water contact permanent, inhalation periodic, processing and application<\/li>\n<li>Environmental Product Declaration EPD<\/li>\n<\/ul>","categories":[{"key":"injection-systems","text":"Injection Systems"},{"key":"injection-systems","text":"Injection Systems"}],"groups":[{"key":"soil-stabilisation-slab-lifting","text":"Soil Stabilisation and Slab Lifting"},{"key":"structural-injections","text":"Structural injection"}],"url":"injection-systems\/soil-stabilisation-slab-lifting\/mc-injekt-2700-l.html"},{"id":"161e129d65760d2c7e575ff7141a03f3","name":"MC-Montan Injekt CB","short_description":"Injection resin for consolidating and sealing rock and soils as well as for setting and lifting concrete slabs","description":"Two-component silicate-based injection resin for non-porous, water-independent sealing of rock and soil as well as fixing and lifting of concrete slabs and roadways.","areas_of_applications":"<ul>\n<li>Sealing and consolidation of gaps and cavities in rock areas, loose rock, soils<\/li>\n<li>Increasing the load-bearing capacity of the building site under floor slabs and foundations<\/span><\/li>\n<li>Controlled lifting of floor slabs and foundations in building structures<\/span><\/li>\n<li>Controlled lifting of road slabs according to ZTV BEB Stb<\/span><\/li>\n<li>Sealing and reinforcing cavities and cracks in structures made of concrete and masonry<\/li>\n<li>Sealing of running joints in concrete structures<\/li>\n<\/ul>","properties":"<ul>\n<li>Low-viscosity silicate-based duromer resin<\/li>\n<li>Short reaction time<\/li>\n<li>Water-displacing<\/li>\n<li>Not foaming<\/li>\n<li>High compressive and tensile strength<\/li>\n<li>Permanently watertight<\/li>\n<li>Corresponds to fire class B1 according to DIN 4102 in the injection medium format<\/li>\n<li>Groundwater hygienically harmless<\/li>\n<li>REACH exposure: Water contact permanent, inhalation periodic, processing and application<\/li>\n<li>Environmental Product Declaration EPD<\/li>\n<\/ul>","categories":[{"key":"tunnelling-systems","text":"Tunnelling Systems"},{"key":"injection-systems","text":"Injection Systems"}],"groups":[{"key":"subsoil-injection-and-sealing","text":"Subsoil injection and sealing"},{"key":"soil-stabilisation-slab-lifting","text":"Soil Stabilisation and Slab Lifting"}],"url":"tunnelling-systems\/subsoil-injection-and-sealing\/mc-montan-injekt-cb.html"},{"id":"ee084f3efce9d142d36a7b36963ec9ee","name":"MC-Montan Injekt FF","short_description":"Injection rigid foam for filling cavities, for consolidating and sealing foundation soil and rock","description":"Low-viscosity polyurethane-based injection resin for increasing the load-bearing capacity of building ground and for leveling grouting of floor slabs and filling cavities. MC-Montan Injekt FF is water-displacing, fast-curing and forms a solid, closed-cell, waterproof and load-bearing rigid foam with a defined increase in volume. Suitable for injection into subsoil and groundwater.","areas_of_applications":"<ul>\n<li>Increasing the load-bearing capacity of the building site under floor slabs and foundations<\/li>\n<li>Fixing of concrete slabs, especially on dynamically highly stressed surfaces<\/span><\/li>\n<li>Leveling consolidating injections of floor slabs and foundations<\/span><\/li>\n<li>Sealing and reinforcing of void-rich\/cracked structures made of concrete and masonry<\/li>\n<li>Sealing of rigid joints in concrete buildings<\/li>\n<li>Sealing and stabilizing of construction pit enclosures<\/li>\n<\/ul>","properties":"<ul>\n<li>Low-viscosity polyurethane-based duromer resin<\/li>\n<li>Volume increase with limited foaming without water contact<\/li>\n<li>Water-displacing<\/li>\n<li>Fast curing<\/li>\n<li>Water impermeability<\/li>\n<li>Corresponds to fire class B2 according to DIN 4102 in the injection medium<\/li>\n<li>No lasting effects on soil and groundwater according to DIBt test criteria<\/li>\n<li>Tested for traffic areas in concrete construction according to ZTV TL BEB-Stb<\/li>\n<li>REACH exposure: water contact permanent, inhalation periodic, processing and application<\/li>\n<li>Environmental Product Declaration EPD<\/li>\n<\/ul>","categories":[{"key":"injection-systems","text":"Injection Systems"},{"key":"tunnelling-systems","text":"Tunnelling Systems"},{"key":"injection-systems","text":"Injection Systems"}],"groups":[{"key":"tunnel-injections","text":"Tunnel injections"},{"key":"subsoil-injection-and-sealing","text":"Subsoil injection and sealing"},{"key":"soil-stabilisation-slab-lifting","text":"Soil Stabilisation and Slab Lifting"}],"url":"injection-systems\/tunnel-injections\/mc-montan-injekt-ff.html"},{"id":"afe7de38c77a017fc7a7283d17f125de","name":"MC-Montan Injekt FN","short_description":"Injection resin for the sealing and consolidation of rock, foundation soil and civil engineering structures","description":"Two-component injection resins based on polyurethane, with a variable reaction time between 25 seconds and 1 hour, for the tough-elastic sealing and consolidation of mountains and soil as well as for setting and lifting concrete slabs and roadways.","areas_of_applications":"<ul>\n<li>Sealing and consolidation of rock, subsoil and structures in special-purpose civil engineering and tunnel construction<\/li>\n<li>Waterproofing of trench\/pit enclosures<\/li>\n<li>Stabilising of foundation subsoil against the risk of ground failure<\/li>\n<li>Increasing the load-bearing capacity of subsoil under floor slabs and foundations<\/li>\n<li>Sealing and reinforcing cracks, joints and cavities in structures made of concrete, masonry, natural stone, etc.<\/li>\n<\/ul>","properties":"<ul>\n<li>Low-viscosity polyurethane-based duromer resin<\/li>\n<li>Good injectability<\/li>\n<li>Variable reactivity control<\/li>\n<li>Water-displacing<\/li>\n<li>Limited foaming on contact with water (rigid foam)<\/li>\n<li>High compressive and tensile strength<\/li>\n<li>Permanently watertight<\/li>\n<li>Can be combined with cement suspension (hybrid injection)<\/li>\n<li>Corresponds to fire class B2 according to DIN 4102 in the injection\u00a0 \u00a0medium format<\/li>\n<li>No lasting effects on soil and groundwater according to DIBt test criteria<\/li>\n<li>REACH exposure: Water contact permanent, inhalation periodic,\u00a0 \u00a0processing and application<\/li>\n<li>Environmental Product Declaration EPD<\/li>\n<\/ul>","categories":[{"key":"tunnelling-systems","text":"Tunnelling Systems"},{"key":"injection-systems","text":"Injection Systems"},{"key":"injection-systems","text":"Injection Systems"}],"groups":[{"key":"subsoil-injection-and-sealing","text":"Subsoil injection and sealing"},{"key":"tunnel-injections","text":"Tunnel injections"},{"key":"soil-stabilisation-slab-lifting","text":"Soil Stabilisation and Slab Lifting"}],"url":"tunnelling-systems\/subsoil-injection-and-sealing\/mc-montan-injekt-fn.html"},{"id":"7badcd7c21633e1f120b2725984f824a","name":"MC-Montan Injekt DS","short_description":"Ductile-elastic, durable sealing injection resin of rock, foundation soil and civil engineering structures","description":"Two-component polyurethane-based injection resin. Non-foaming for elastic sealing and bonding of rock and soil. Suitable for injection into subsoil and groundwater.","areas_of_applications":"<ul>\n<li>Ductile, flexible filler and sealant of crevices, joints and cavities in civil engineering and tunnel construction under dry, water-bearing and pressurised water-bearing conditions<\/li>\n<li>Waterproofing and consolidating loose rock<\/li>\n<li>Waterproofing of hydraulic structures and dams, drinking water and sewage structures<\/li>\n<li>Waterproofing of pipe and liner connections to manhole\/shaft structures of sewerage infrastructure<\/li>\n<li>Sealing injection of manhole ring joints, pipe penetrations, socket joints<\/li>\n<\/ul>","properties":"<ul>\n<li>Particularly low-viscosity polyurethane-based elastomer resin<\/li>\n<li>Very good injectability<\/li>\n<li>High penetration activity due to low surface tension<\/li>\n<li>Water-displacing, no foam formation<\/li>\n<li>Variable control of reaction times<\/li>\n<li>Complete curing under dynamic loading<\/li>\n<li>High elasticity<\/li>\n<li>Can be combined with cement suspension (hybrid injection)<\/li>\n<li>Corresponds to fire class B2 according to DIN 4102 in the injection medium<\/li>\n<li>Durable water impermeability<\/li>\n<li>No lasting effects on soil and groundwater according to DIBt test principles<\/li>\n<li>REACH exposure: water contact permanent, inhalation periodic, processing and application<\/li>\n<li>Environmental Product Declaration EPD<\/li>\n<\/ul>","categories":[{"key":"tunnelling-systems","text":"Tunnelling Systems"},{"key":"injection-systems","text":"Injection Systems"},{"key":"injection-systems","text":"Injection Systems"}],"groups":[{"key":"subsoil-injection-and-sealing","text":"Subsoil injection and sealing"},{"key":"soil-stabilisation-slab-lifting","text":"Soil Stabilisation and Slab Lifting"},{"key":"tunnel-injections","text":"Tunnel injections"}],"url":"tunnelling-systems\/subsoil-injection-and-sealing\/mc-montan-injekt-ds.html"},{"id":"7f52601419754aff3d11dc82083eed1f","name":"MC-Montan Injekt LE-S","short_description":"Expansion resin for consolidation, load-bearing capacity increase and sealing of foundation soil as well as for lifting of structures","description":"Fast-reacting and hardening, two-component expansion resin with a mixing ratio of 1:1 parts by volume for increasing the load-bearing capacity and sealing the subsoil as well as for lifting structures. MC-Montan Injekt LE-S has a water-displacing effect with a high volume increase and is watertight, pressure- and tension-resistant and vibration-damping when fully reacted. For increasing the load-bearing capacity of the subsoil under buildings and traffic areas, raising and stabilizing buildings, stopping heavy water inflows in excavations and filling cavities up to 60 cm in diameter. Particularly suitable for injecting into subsoil and groundwater.","areas_of_applications":"<ul>\n<li>Consolidation of foundation soil in deep soil layers up to approx. 10 m by compacting<\/li>\n<li>Increasing the load-bearing capacity of the building site under structures and traffic areas<\/li>\n<li>Lifting and stabilization of structures by lifting the building site<\/li>\n<li>Stopping extreme water leakages in structures and sewage structures<\/li>\n<li>Cavity filling up to 60 cm in diameter (without aggregate)<\/li>\n<\/ul>","properties":"<ul>\n<li>Low-viscosity polyurethane-based expansion resin<\/li>\n<li>High increase in volume, no resqueezing<\/li>\n<li>Water-displacing<\/li>\n<li>Durable water impermeability<\/li>\n<li>Pressure-resistant, dampening vibrations<\/li>\n<li>Low relaxation<\/li>\n<li>Corresponds to fire class B2 according to DIN 4102 in the injection medium<\/li>\n<li>No lasting effects on soil and groundwater according to the test principles of the DIBt<\/li>\n<li>REACH exposure: water contact permanent, inhalation periodic, processing and application<\/li>\n<\/ul>","categories":[{"key":"injection-systems","text":"Injection Systems"}],"groups":[{"key":"soil-stabilisation-slab-lifting","text":"Soil Stabilisation and Slab Lifting"}],"url":"injection-systems\/soil-stabilisation-slab-lifting\/mc-montan-injekt-le-s.html"},{"id":"1ad11d7c3750740455fd3ac7b40a4c1f","name":"MC-Montan Injekt TR-X","short_description":"Swelling, flexible, waterproofing acrylate gel sealant for injection in rock and solid structures","description":"Multi-component, polymer-reinforced, low-viscosity, water-based injection resin based on acrylate, with variable reaction time between 2:30 and 10 min. MC-Montan Injekt TR-X is swellable and highly elastic, durable and particularly resistant in alkaline environments. Particularly suitable for injection into drinking water structures. Suitable for injection into subsoil and groundwater.","areas_of_applications":"<ul>\n<li>Swelling, flexible consolidation and waterproofing of fine and coarse loose rock<\/li>\n<li>Injection of waterproofing membrane into foundation soil (curtain injection)<\/li>\n<li>Elastically swellable sealing of structural joints (e.g. tubbing joints)<\/li>\n<li>Sealing of cavities and imperfections in the area of the annular gap<\/li>\n<li>Injection of construction joints via injection tubes\/hoses<\/li>\n<li>Injection of structures with a dry, moist, water-bearing condition during the injection as well as with permanent at least one-sided water exposure after the injection<\/li>\n<\/ul>","properties":"<ul>\n<li>Low-viscosity acrylic-based hydrogel<\/li>\n<li>Very good injectability<\/li>\n<li>Readily controllable injection path propagation thanks to controllable reaction time<\/li>\n<li>Very low application temperature<\/li>\n<li>Reliable sealing\/waterproofing due to high elasticity and good swelling capacity<\/li>\n<li>Durably water-impermeable in moist media<\/li>\n<li>CE conformity according to EN 1504-5: CE U(S2) W(2\/3\/4) (1\/40)<\/li>\n<li>Corresponds to fire class B2 according to DIN 4102 in the injection medium<\/li>\n<li>General building authority approval issued by DIBt for injection into soil and groundwater<\/li>\n<li>Fulfils the UBA (German environmental agency) guidelines for sealants in contact with potable water<\/li>\n<li>High chemical resistance especially in highly alkaline environments<\/li>\n<li>REACH exposure: water contact permanent, inhalation periodic, processing and application<\/li>\n<li>Environmental Product Declaration EPD<\/li>\n<\/ul>","categories":[{"key":"tunnelling-systems","text":"Tunnelling Systems"},{"key":"injection-systems","text":"Injection Systems"},{"key":"injection-systems","text":"Injection Systems"}],"groups":[{"key":"subsoil-injection-and-sealing","text":"Subsoil injection and sealing"},{"key":"tunnel-injections","text":"Tunnel injections"},{"key":"soil-stabilisation-slab-lifting","text":"Soil Stabilisation and Slab Lifting"}],"url":"tunnelling-systems\/subsoil-injection-and-sealing\/mc-montan-injekt-tr-x.html"},{"id":"d58e0fdaec04ca83828da274ed6f0945","name":"MC-Montan Injekt CI","short_description":"Injection resin for consolidation and sealing of rock and loose stoneas well as for injection with cement suspension in the hybrid method","description":"","areas_of_applications":"<ul>\n<li>Sealing and consolidating fissures and cavities in rock zones, loose rock, soils<\/li>\n<li>Stabilising and increasing the load-bearing capacity of building ground under floor slabs and foundations<\/li>\n<li>Sealing and reinforcing cavities and cracks in concrete and masonry structures<\/li>\n<li>Filling of space joints<\/li>\n<li>Improving the injection properties of a water-displacing cement suspension through protection against dilution and washing out<\/li>\n<li>Acceleration of the hardening of a cement suspension with high final strengths<\/li>\n<li>Hybrid injection with cement suspension against strong flowing water<\/li>\n<\/ul>","properties":"<ul>\n<li>Low-viscosity silicate-based duromer resin<\/li>\n<li>Long working time<\/li>\n<li>Water displacing<\/li>\n<li>Non-foaming<\/li>\n<li>High compressive and tensile strength<\/li>\n<li>Permanently waterproof<\/li>\n<\/ul>","categories":[{"key":"injection-systems","text":"Injection Systems"}],"groups":[{"key":"soil-stabilisation-slab-lifting","text":"Soil Stabilisation and Slab Lifting"}],"url":"injection-systems\/soil-stabilisation-slab-lifting\/mc-montan-injekt-ci.html"},{"id":"610e3f93fe8d107f65398190e2ef6dae","name":"MC-Montan Injekt LE-S 60","short_description":"Optimal density, expansion resin for soil stabilization, load bearing capacity increase, jacking of structures and sealing against heavy water ingress","description":"Fast-reacting and hardening, high density, two-component expansion resin with a mixing ratio of 1:1 parts by volume for increasing the load-bearing capacity and sealing the subsoil as well as for lifting structures. MC-Montan Injekt LE-S 100 has a water-displacing effect with a relatively low volume increase and is watertight, pressure- and tension-resistant and vibration-damping when fully reacted. For increasing the load-bearing capacity of the subsoil under buildings and traffic areas, raising and stabilizing buildings, stopping heavy water inflows in excavations and filling cavities up to 60 cm in diameter. Particularly suitable for injecting into subsoil and groundwater.","areas_of_applications":"<ul>\n<li>Improve properties of sub-base, sub-grade and base course to enable flexible or rigid pavements and load bearing slabs to carry more load, prevent deformation and vibration under static and dynamic loads<\/li>\n<li>Precision injection of soil below sub-structure to increase elasticity modulus and net safe bearing pressure, enabling the structure to carry additional load, facilitating change in usage of structures, additional dead and live loads carrying capacity with minimum collateral damages<\/li>\n<li>Lateral compaction of granular sub-soil layers up to approx. 10 m depth by controlled expansion for increasing angle of internal friction<\/li>\n<li>Displacement grouting in cohesive soil to improve compression index and swelling index<\/li>\n<li>Increasing the load-bearing capacity of the structures against static and dynamic loads<\/li>\n<li>Precision lifting and stabilization of structures undergoing undesirable settlement in sitly and sandy soils<\/li>\n<li>Stopping extreme water leakages in structures and sewage structures<\/li>\n<li>Cavity filling up to 60 cm in diameter (without aggregate)<\/li>\n<\/ul>","properties":"<ul>\n<li>Low-viscosity polyurethane-based expansion resin<\/li>\n<li>Optimised density and expansion, no resqueezing<\/li>\n<li>Water-displacing<\/li>\n<li>Durable water impermeability<\/li>\n<li>Pressure-resistant, dampening vibrations<\/li>\n<li>Low relaxation<\/li>\n<li>REACH exposure: water contact permanent, inhalation periodic, processing and application<\/li>\n<\/ul>","categories":[{"key":"injection-systems","text":"Injection Systems"}],"groups":[{"key":"soil-stabilisation-slab-lifting","text":"Soil Stabilisation and Slab Lifting"}],"url":"injection-systems\/soil-stabilisation-slab-lifting\/mc-montan-injekt-le-s-60.html"},{"id":"018ca4adf10e92541512cc5cbb3e7fdb","name":"MC-Montan Injekt LE-S 100","short_description":"High density, expansion resin for soil stabilization, load bearing capacity increase, jacking of structures and sealing against water flow","description":"Fast-reacting and hardening, high density, two-component expansion resin with a mixing ratio of 1:1 parts by volume for increasing the load-bearing capacity and sealing the subsoil as well as for lifting structures. MC-Montan Injekt LE-S 100 has a water-displacing effect with a relatively low volume increase and is watertight, pressure- and tension-resistant and vibration-damping when fully reacted. For increasing the load-bearing capacity of the subsoil under buildings and traffic areas, raising and stabilizing buildings, stopping heavy water inflows in excavations and filling cavities up to 60 cm in diameter. Particularly suitable for injecting into subsoil and groundwater.","areas_of_applications":"<ul>\n<li>Improve properties of sub-base, sub-grade and base course to enable flexible or rigid pavements and load bearing slabs to carry more load, prevent deformation and vibration under static and dynamic conditions<\/li>\n<li>Precision injection of soil below sub-structure to increase elasticity modulus and net safe bearing pressure, enabling the structure to carry additional load, facilitating change in usage of structures and additional dead\/live loads carrying capacity with minimum collateral damages<\/li>\n<li>Lateral compaction of granular sub-soil layers up to approx. 10 m depth by controlled expansion for increasing angle of internal friction<\/li>\n<li>Displacement grouting in cohesive soil to improve compression index and swelling index<\/li>\n<li>Increasing the load-bearing capacity of the structures against static and dynamic loads<\/li>\n<li>Precision lifting and stabilization of structures undergoing undesirable settlement in silty, sandy and soft soils<\/li>\n<li>Stopping extreme water leakages in structures and sewage structures<\/li>\n<li>Cavity filling up to 60 cm in diameter (without aggregate)<\/li>\n<\/ul>","properties":"<ul>\n<li>Low-viscosity polyurethane-based expansion resin<\/li>\n<li>High density expansion, no resqueezing<\/li>\n<li>Water-displacing<\/li>\n<li>Durable water impermeability<\/li>\n<li>Pressure-resistant, dampening vibrations<\/li>\n<li>Low relaxation<\/li>\n<li>REACH exposure: water contact permanent, inhalation periodic, processing and application<\/li>\n<\/ul>","categories":[{"key":"injection-systems","text":"Injection Systems"}],"groups":[{"key":"soil-stabilisation-slab-lifting","text":"Soil Stabilisation and Slab Lifting"}],"url":"injection-systems\/soil-stabilisation-slab-lifting\/mc-montan-injekt-le-s-100.html"}] {"2cb3966be0479c0f897941a55731d137":[{"id":"4e89aab46996943317f0563d6577af6c","name":"MC-Injekt 2700","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Injekt_2700_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"},{"id":"dba09405f389b545d0faac4735cd2b27","name":"MC-Injekt 2700 - Komponente A","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Injekt_2700_-_Komponente_A_GB_EN_SDS.pdf","type":"sds","typeText":"Safety Datasheets"},{"id":"6f7dda40bacc9d4c0b08f27dc63cd391","name":"MC-Injekt 2700 - Komponente B","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Injekt_2700_-_Komponente_B_GB_EN_SDS.pdf","type":"sds","typeText":"Safety Datasheets"}],"e91c8e2440ae1d6fe9102bb022ed3c58":[{"id":"4e89aab46996943317f0563d6577af6c","name":"MC-Injekt 2700","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Injekt_2700_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"},{"id":"dba09405f389b545d0faac4735cd2b27","name":"MC-Injekt 2700 - Komponente A","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Injekt_2700_-_Komponente_A_GB_EN_SDS.pdf","type":"sds","typeText":"Safety Datasheets"},{"id":"6f7dda40bacc9d4c0b08f27dc63cd391","name":"MC-Injekt 2700 - Komponente B","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Injekt_2700_-_Komponente_B_GB_EN_SDS.pdf","type":"sds","typeText":"Safety Datasheets"}],"da5025c6273846b491338a355e43577e":[{"id":"5786a97608afc30092131c4a9f1285f6","name":"MC-Injekt 2700 L","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Injekt_2700_L_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"},{"id":"75934da46b1c16338d94aabfccc74018","name":"MC-Injekt 2700 L - Komponente A","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Injekt_2700_L_-_Komponente_A_GB_EN_SDS.pdf","type":"sds","typeText":"Safety Datasheets"},{"id":"535308750753b0ceb7c0a05a59c78d36","name":"MC-Injekt 2700 L - Komponente B","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Injekt_2700_L_-_Komponente_B_GB_EN_SDS.pdf","type":"sds","typeText":"Safety Datasheets"}],"e2ca5fb0415aef3d3fcd3ea52b8b1fd8":[{"id":"5786a97608afc30092131c4a9f1285f6","name":"MC-Injekt 2700 L","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Injekt_2700_L_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"},{"id":"75934da46b1c16338d94aabfccc74018","name":"MC-Injekt 2700 L - Komponente A","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Injekt_2700_L_-_Komponente_A_GB_EN_SDS.pdf","type":"sds","typeText":"Safety Datasheets"},{"id":"535308750753b0ceb7c0a05a59c78d36","name":"MC-Injekt 2700 L - Komponente B","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Injekt_2700_L_-_Komponente_B_GB_EN_SDS.pdf","type":"sds","typeText":"Safety Datasheets"}],"fc11c86af62da69e8f9ef42726ba5755":[{"id":"056e057b4209fa547c880f5cbf982d0e","name":"MC-Injekt GL-95","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Injekt_GL-95_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"},{"id":"33ce8ead97ab63a16c2bad22098de088","name":"MC-Injekt GL-95 - Komponente A 1","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Injekt_GL-95_-_Komponente_A_1_GB_EN_SDS.pdf","type":"sds","typeText":"Safety Datasheets"}],"344ca645f7970f430e5792ccf767495c":[{"id":"056e057b4209fa547c880f5cbf982d0e","name":"MC-Injekt GL-95","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Injekt_GL-95_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"},{"id":"33ce8ead97ab63a16c2bad22098de088","name":"MC-Injekt GL-95 - Komponente A 1","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Injekt_GL-95_-_Komponente_A_1_GB_EN_SDS.pdf","type":"sds","typeText":"Safety Datasheets"}],"67cd8c615eb362c7178b98baae439ab9":[{"id":"b6b140dd1c961680c35cd83e0022393e","name":"MC-Montan Injekt","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_FR_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"}],"6dc7c3c63662d9380154f7ccc1c87d0e":[{"id":"b6b140dd1c961680c35cd83e0022393e","name":"MC-Montan Injekt","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_FR_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"}],"161e129d65760d2c7e575ff7141a03f3":[{"id":"6d940e24557a3e31506f56d8c204ef6a","name":"MC-Montan Injekt CB","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_CB_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"}],"2bfbcbca2761aedd1cccd8f644dd4120":[{"id":"6d940e24557a3e31506f56d8c204ef6a","name":"MC-Montan Injekt CB","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_CB_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"}],"d58e0fdaec04ca83828da274ed6f0945":[{"id":"881120e5e0645165b8e4891ecbe91c7b","name":"MC-Montan Injekt CI","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_CI_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"}],"7badcd7c21633e1f120b2725984f824a":[{"id":"06a1f066697241df568d4c6d5ccb1e61","name":"MC-Montan Injekt DS","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_DS_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"}],"baa2cabca4aee2f59927fb77cbfac68c":[{"id":"06a1f066697241df568d4c6d5ccb1e61","name":"MC-Montan Injekt DS","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_DS_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"}],"ee084f3efce9d142d36a7b36963ec9ee":[{"id":"d0ab472e0c070d942fb3ea83e4a55b2f","name":"MC-Montan Injekt FF","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_FF_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"},{"id":"33decb30a56df595aaa58c1955a04345","name":"MC-Montan Injekt FF","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_FF_DE_RO_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"}],"62ed5ad3294912e3f7be172089118aef":[{"id":"d0ab472e0c070d942fb3ea83e4a55b2f","name":"MC-Montan Injekt FF","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_FF_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"},{"id":"33decb30a56df595aaa58c1955a04345","name":"MC-Montan Injekt FF","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_FF_DE_RO_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"}],"afe7de38c77a017fc7a7283d17f125de":[{"id":"d71c2bfcf0c1f83768f0612b0f3c993b","name":"MC-Montan Injekt FN","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_FN_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"}],"b299a9e1b6ed34fc662fa85b053d3195":[{"id":"d71c2bfcf0c1f83768f0612b0f3c993b","name":"MC-Montan Injekt FN","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_FN_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"}],"fdc044384e0f96f9e9440529332186e3":[{"id":"f0f41c2c7b19fd0b7b448046b8cc4541","name":"MC-Montan Injekt FS","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_FS_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"}],"ba36b64ce8aac856b032d2b4fe22070b":[{"id":"f0f41c2c7b19fd0b7b448046b8cc4541","name":"MC-Montan Injekt FS","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_FS_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"}],"7f52601419754aff3d11dc82083eed1f":[{"id":"b3892f678bfe1ae1056b8607dfd1043b","name":"MC-Montan Injekt LE-S","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_LE-S_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"}],"018ca4adf10e92541512cc5cbb3e7fdb":[{"id":"d344e1648d001040a3ef8417a82cc176","name":"MC-Montan Injekt LE-S 100","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_LE-S_100_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"}],"610e3f93fe8d107f65398190e2ef6dae":[{"id":"69dc0af41416f7c390956a8ab93cf9a7","name":"MC-Montan Injekt LE-S 60","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_LE-S_60_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"}],"1ad11d7c3750740455fd3ac7b40a4c1f":[{"id":"7321f00ac9fd230cfb6cd7374aa2d8dd","name":"MC-Montan Injekt TR-X","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_TR-X_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"}],"3679318d05871330b845f4fa3dd67476":[{"id":"7321f00ac9fd230cfb6cd7374aa2d8dd","name":"MC-Montan Injekt TR-X","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_TR-X_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"}]}