Subsoil injection and sealing

There are products

Products to compare


Description:
Properties:
Applications:
Downloads:

Talk to a specialist ...

MC-Montan Injekt FR

Injection resin for the sealing and consolidation of rock, foundation soil and civil engineering structures

MC-Montan Injekt FS

Injection resin for the sealing and consolidation of rock, foundation soil and civil engineering structures

MC-Montan Injekt DR

Ductile-elastic, durable sealing injection resin of rock, foundation soil and civil engineering structures

MC-Montan Injekt CB

Injection resin for consolidating and sealing rock and soils as well as for setting and lifting concrete slabs

MC-Montan Injekt FF

Injection rigid foam for filling cavities, for consolidating and sealing foundation soil and rock

MC-Montan Injekt FN

Injection resin for the sealing and consolidation of rock, foundation soil and civil engineering structures

MC-Montan Injekt DS

Ductile-elastic, durable sealing injection resin of rock, foundation soil and civil engineering structures

MC-Montan Injekt TR-X

Swelling, flexible, waterproofing acrylate gel sealant for injection in rock and solid structures

MC-Montan Injekt LE

Expansion resin for consolidation, load-bearing capacity increase and sealing of foundation soil as well as for lifting of structures

[{"id":"67cd8c615eb362c7178b98baae439ab9","name":"MC-Montan Injekt FR","short_description":"Injection resin for the sealing and consolidation of rock, foundation soil and civil engineering structures","description":"Two-component injection resins based on polyurethane, with a variable reaction time between 25 seconds and 1 hour, for the tough-elastic sealing and consolidation of mountains and soil as well as for setting and lifting concrete slabs and roadways.","areas_of_applications":"<ul>\n<li>Sealing and consolidation of rock, subsoil and structures in special-purpose civil engineering and tunnel construction<\/li>\n<li>Waterproofing of trench\/pit enclosures<\/li>\n<li>Stabilising of foundation subsoil against the risk of ground failure<\/li>\n<li>Increasing the load-bearing capacity of subsoil under floor slabs and foundations<\/li>\n<li>Sealing and reinforcing cracks, joints and cavities in structures made of concrete, masonry, natural stone, etc.<\/li>\n<\/ul>","properties":"<ul>\n<li>Low-viscosity polyurethane-based duromer resin<\/li>\n<li>Good injectability<\/li>\n<li>Variable reactivity control<\/li>\n<li>Water-displacing<\/li>\n<li>Limited foaming on contact with water (rigid foam)<\/li>\n<li>High compressive and tensile strength<\/li>\n<li>Permanently watertight<\/li>\n<li>Can be combined with cement suspension (hybrid injection)<\/li>\n<li>Corresponds to fire class B2 according to DIN 4102 in the injection medium format<\/li>\n<li>No lasting effects on soil and groundwater according to DIBt test criteria<\/li>\n<li>REACH exposure: Water contact permanent, inhalation periodic, processing and application<\/li>\n<li>Environmental Product Declaration EPD<\/li>\n<\/ul>","categories":[{"key":"tunnelling-systems","text":"Tunnelling Systems"},{"key":"injection-systems","text":"Injection Systems"},{"key":"injection-systems","text":"Injection Systems"}],"groups":[{"key":"subsoil-injection-and-sealing","text":"Subsoil injection and sealing"},{"key":"soil-stabilisation-slab-lifting","text":"Soil Stabilisation and Slab Lifting"},{"key":"tunnel-injections","text":"Tunnel injections"}],"url":"tunnelling-systems\/subsoil-injection-and-sealing\/mc-montan-injekt-fr.html"},{"id":"fdc044384e0f96f9e9440529332186e3","name":"MC-Montan Injekt FS","short_description":"Injection resin for the sealing and consolidation of rock, foundation soil and civil engineering structures","description":"Two-component polyurethane-based injection resin for non-positive reinforcement. Long working time of approx. 40 min. Suitable for viscoplastic sealing and consolidation of rock and soil as well as for fixing and lifting concrete slabs and roadways. Suitable for injection into subsoil and groundwater.","areas_of_applications":"<ul>\n<li>Sealing and consolidation of rock, subsoil and structures in special-purpose civil engineering and tunnel construction<\/li>\n<li>Waterproofing of trench\/pit enclosures<\/li>\n<li>Stabilising of foundation subsoil against the risk of ground failure<\/li>\n<li>Increasing the load-bearing capacity of subsoil under floor slabs and foundations<\/li>\n<li>Sealing and reinforcing cracks, joints and cavities in structures made of concrete, masonry, natural stone, etc.<\/li>\n<\/ul>","properties":"<ul>\n<li>Low-viscosity polyurethane-based duromer resin<\/li>\n<li>Good injectability<\/li>\n<li>Variable reactivity control<\/li>\n<li>Water-displacing<\/li>\n<li>Limited foaming on contact with water (rigid foam)<\/li>\n<li>High compressive and tensile strength<\/li>\n<li>Permanently watertight<\/li>\n<li>Can be combined with cement suspension (hybrid injection)<\/li>\n<li>Corresponds to fire class B2 according to DIN 4102 in the injection medium format<\/li>\n<li>No lasting effects on soil and groundwater according to DIBt test criteria<\/li>\n<li>REACH exposure: Water contact permanent, inhalation periodic, processing and application<\/li>\n<li>Environmental Product Declaration EPD<\/li>\n<\/ul>","categories":[{"key":"tunnelling-systems","text":"Tunnelling Systems"},{"key":"injection-systems","text":"Injection Systems"},{"key":"injection-systems","text":"Injection Systems"}],"groups":[{"key":"subsoil-injection-and-sealing","text":"Subsoil injection and sealing"},{"key":"soil-stabilisation-slab-lifting","text":"Soil Stabilisation and Slab Lifting"},{"key":"tunnel-injections","text":"Tunnel injections"}],"url":"tunnelling-systems\/subsoil-injection-and-sealing\/mc-montan-injekt-fs.html"},{"id":"3370dcde113cc191731a5113ee002d14","name":"MC-Montan Injekt DR","short_description":"Ductile-elastic, durable sealing injection resin of rock, foundation soil and civil engineering structures","description":"Two-component injection resin based on polyurethane. Reaction time approx. 4 minutes. Suitable for elastic sealing and bonding of rock and soil. Particularly suitable for the injection of subsoil and groundwater\n","areas_of_applications":"<ul>\n<li>Ductile, flexible filler and sealant of crevices, joints and cavities in civil engineering and tunnel construction under dry, water-bearing and pressurised water-bearing conditions<\/li>\n<li>Waterproofing and consolidating loose rock<\/li>\n<li>Waterproofing of hydraulic structures and dams, drinking water and sewage structures<\/li>\n<li>Waterproofing of pipe and liner connections to manhole\/shaft structures of sewerage infrastructure<\/li>\n<li>Sealing injection of manhole ring joints, pipe penetrations, socket joints<\/li>\n<\/ul>","properties":"<ul>\n<li>Particularly low-viscosity polyurethane-based elastomer resin<\/li>\n<li>Very good injectability<\/li>\n<li>High penetration activity due to low surface tension<\/li>\n<li>Water-displacing, no foam formation<\/li>\n<li>Variable control of reaction times<\/li>\n<li>Complete curing under dynamic loading<\/li>\n<li>High elasticity<\/li>\n<li>Can be combined with cement suspension (hybrid injection)<\/li>\n<li>Corresponds to fire class B2 according to DIN 4102 in the injection medium<\/li>\n<li>Durable water impermeability<\/li>\n<li>CE conformity according to EN 1504-5: CE U(D2) W(1) (1\/2\/3\/4) (5\/40)<\/li>\n<li>General building authority approval issued by the DIBt for injection into soil and groundwater<\/li>\n<li>REACH exposure: water contact permanent, inhalation periodic, processing and application<\/li>\n<li>Environmental Product Declaration EPD<\/li>\n<\/ul>","categories":[{"key":"tunnelling-systems","text":"Tunnelling Systems"}],"groups":[{"key":"subsoil-injection-and-sealing","text":"Subsoil injection and sealing"}],"url":"tunnelling-systems\/subsoil-injection-and-sealing\/mc-montan-injekt-dr.html"},{"id":"161e129d65760d2c7e575ff7141a03f3","name":"MC-Montan Injekt CB","short_description":"Injection resin for consolidating and sealing rock and soils as well as for setting and lifting concrete slabs","description":"Two-component silicate-based injection resin for non-porous, water-independent sealing of rock and soil as well as fixing and lifting of concrete slabs and roadways.","areas_of_applications":"<ul>\n<li>Sealing and consolidation of gaps and cavities in rock areas, loose rock, soils<\/li>\n<li>Increasing the load-bearing capacity of the building site under floor slabs and foundations<\/span><\/li>\n<li>Controlled lifting of floor slabs and foundations in building structures<\/span><\/li>\n<li>Controlled lifting of road slabs according to ZTV BEB Stb<\/span><\/li>\n<li>Sealing and reinforcing cavities and cracks in structures made of concrete and masonry<\/li>\n<li>Sealing of running joints in concrete structures<\/li>\n<\/ul>","properties":"<ul>\n<li>Low-viscosity silicate-based duromer resin<\/li>\n<li>Short reaction time<\/li>\n<li>Water-displacing<\/li>\n<li>Not foaming<\/li>\n<li>High compressive and tensile strength<\/li>\n<li>Permanently watertight<\/li>\n<li>Corresponds to fire class B1 according to DIN 4102 in the injection medium format<\/li>\n<li>Groundwater hygienically harmless<\/li>\n<li>REACH exposure: Water contact permanent, inhalation periodic, processing and application<\/li>\n<li>Environmental Product Declaration EPD<\/li>\n<\/ul>","categories":[{"key":"tunnelling-systems","text":"Tunnelling Systems"},{"key":"injection-systems","text":"Injection Systems"}],"groups":[{"key":"subsoil-injection-and-sealing","text":"Subsoil injection and sealing"},{"key":"soil-stabilisation-slab-lifting","text":"Soil Stabilisation and Slab Lifting"}],"url":"tunnelling-systems\/subsoil-injection-and-sealing\/mc-montan-injekt-cb.html"},{"id":"ee084f3efce9d142d36a7b36963ec9ee","name":"MC-Montan Injekt FF","short_description":"Injection rigid foam for filling cavities, for consolidating and sealing foundation soil and rock","description":"Low-viscosity polyurethane-based injection resin for increasing the load-bearing capacity of building ground and for leveling grouting of floor slabs and filling cavities. MC-Montan Injekt FF is water-displacing, fast-curing and forms a solid, closed-cell, waterproof and load-bearing rigid foam with a defined increase in volume. Suitable for injection into subsoil and groundwater.","areas_of_applications":"<ul>\n<li>Increasing the load-bearing capacity of the building site under floor slabs and foundations<\/li>\n<li>Fixing of concrete slabs, especially on dynamically highly stressed surfaces<\/span><\/li>\n<li>Leveling consolidating injections of floor slabs and foundations<\/span><\/li>\n<li>Sealing and reinforcing of void-rich\/cracked structures made of concrete and masonry<\/li>\n<li>Sealing of rigid joints in concrete buildings<\/li>\n<li>Sealing and stabilizing of construction pit enclosures<\/li>\n<\/ul>","properties":"<ul>\n<li>Low-viscosity polyurethane-based duromer resin<\/li>\n<li>Volume increase with limited foaming without water contact<\/li>\n<li>Water-displacing<\/li>\n<li>Fast curing<\/li>\n<li>Water impermeability<\/li>\n<li>Corresponds to fire class B2 according to DIN 4102 in the injection medium<\/li>\n<li>No lasting effects on soil and groundwater according to DIBt test criteria<\/li>\n<li>Tested for traffic areas in concrete construction according to ZTV TL BEB-Stb<\/li>\n<li>REACH exposure: water contact permanent, inhalation periodic, processing and application<\/li>\n<li>Environmental Product Declaration EPD<\/li>\n<\/ul>","categories":[{"key":"injection-systems","text":"Injection Systems"},{"key":"tunnelling-systems","text":"Tunnelling Systems"},{"key":"injection-systems","text":"Injection Systems"}],"groups":[{"key":"tunnel-injections","text":"Tunnel injections"},{"key":"subsoil-injection-and-sealing","text":"Subsoil injection and sealing"},{"key":"soil-stabilisation-slab-lifting","text":"Soil Stabilisation and Slab Lifting"}],"url":"injection-systems\/tunnel-injections\/mc-montan-injekt-ff.html"},{"id":"afe7de38c77a017fc7a7283d17f125de","name":"MC-Montan Injekt FN","short_description":"Injection resin for the sealing and consolidation of rock, foundation soil and civil engineering structures","description":"Two-component injection resins based on polyurethane, with a variable reaction time between 25 seconds and 1 hour, for the tough-elastic sealing and consolidation of mountains and soil as well as for setting and lifting concrete slabs and roadways.","areas_of_applications":"<ul>\n<li>Sealing and consolidation of rock, subsoil and structures in special-purpose civil engineering and tunnel construction<\/li>\n<li>Waterproofing of trench\/pit enclosures<\/li>\n<li>Stabilising of foundation subsoil against the risk of ground failure<\/li>\n<li>Increasing the load-bearing capacity of subsoil under floor slabs and foundations<\/li>\n<li>Sealing and reinforcing cracks, joints and cavities in structures made of concrete, masonry, natural stone, etc.<\/li>\n<\/ul>","properties":"<ul>\n<li>Low-viscosity polyurethane-based duromer resin<\/li>\n<li>Good injectability<\/li>\n<li>Variable reactivity control<\/li>\n<li>Water-displacing<\/li>\n<li>Limited foaming on contact with water (rigid foam)<\/li>\n<li>High compressive and tensile strength<\/li>\n<li>Permanently watertight<\/li>\n<li>Can be combined with cement suspension (hybrid injection)<\/li>\n<li>Corresponds to fire class B2 according to DIN 4102 in the injection\u00a0 \u00a0medium format<\/li>\n<li>No lasting effects on soil and groundwater according to DIBt test criteria<\/li>\n<li>REACH exposure: Water contact permanent, inhalation periodic,\u00a0 \u00a0processing and application<\/li>\n<li>Environmental Product Declaration EPD<\/li>\n<\/ul>","categories":[{"key":"tunnelling-systems","text":"Tunnelling Systems"},{"key":"injection-systems","text":"Injection Systems"},{"key":"injection-systems","text":"Injection Systems"}],"groups":[{"key":"subsoil-injection-and-sealing","text":"Subsoil injection and sealing"},{"key":"tunnel-injections","text":"Tunnel injections"},{"key":"soil-stabilisation-slab-lifting","text":"Soil Stabilisation and Slab Lifting"}],"url":"tunnelling-systems\/subsoil-injection-and-sealing\/mc-montan-injekt-fn.html"},{"id":"7badcd7c21633e1f120b2725984f824a","name":"MC-Montan Injekt DS","short_description":"Ductile-elastic, durable sealing injection resin of rock, foundation soil and civil engineering structures","description":"Two-component polyurethane-based injection resin. Non-foaming for elastic sealing and bonding of rock and soil. Suitable for injection into subsoil and groundwater.","areas_of_applications":"<ul>\n<li>Ductile, flexible filler and sealant of crevices, joints and cavities in civil engineering and tunnel construction under dry, water-bearing and pressurised water-bearing conditions<\/li>\n<li>Waterproofing and consolidating loose rock<\/li>\n<li>Waterproofing of hydraulic structures and dams, drinking water and sewage structures<\/li>\n<li>Waterproofing of pipe and liner connections to manhole\/shaft structures of sewerage infrastructure<\/li>\n<li>Sealing injection of manhole ring joints, pipe penetrations, socket joints<\/li>\n<\/ul>","properties":"<ul>\n<li>Particularly low-viscosity polyurethane-based elastomer resin<\/li>\n<li>Very good injectability<\/li>\n<li>High penetration activity due to low surface tension<\/li>\n<li>Water-displacing, no foam formation<\/li>\n<li>Variable control of reaction times<\/li>\n<li>Complete curing under dynamic loading<\/li>\n<li>High elasticity<\/li>\n<li>Can be combined with cement suspension (hybrid injection)<\/li>\n<li>Corresponds to fire class B2 according to DIN 4102 in the injection medium<\/li>\n<li>Durable water impermeability<\/li>\n<li>No lasting effects on soil and groundwater according to DIBt test principles<\/li>\n<li>REACH exposure: water contact permanent, inhalation periodic, processing and application<\/li>\n<li>Environmental Product Declaration EPD<\/li>\n<\/ul>","categories":[{"key":"tunnelling-systems","text":"Tunnelling Systems"},{"key":"injection-systems","text":"Injection Systems"},{"key":"injection-systems","text":"Injection Systems"}],"groups":[{"key":"subsoil-injection-and-sealing","text":"Subsoil injection and sealing"},{"key":"soil-stabilisation-slab-lifting","text":"Soil Stabilisation and Slab Lifting"},{"key":"tunnel-injections","text":"Tunnel injections"}],"url":"tunnelling-systems\/subsoil-injection-and-sealing\/mc-montan-injekt-ds.html"},{"id":"1ad11d7c3750740455fd3ac7b40a4c1f","name":"MC-Montan Injekt TR-X","short_description":"Swelling, flexible, waterproofing acrylate gel sealant for injection in rock and solid structures","description":"Multi-component, polymer-reinforced, low-viscosity, water-based injection resin based on acrylate, with variable reaction time between 2:30 and 10 min. MC-Montan Injekt TR-X is swellable and highly elastic, durable and particularly resistant in alkaline environments. Particularly suitable for injection into drinking water structures. Suitable for injection into subsoil and groundwater.","areas_of_applications":"<ul>\n<li>Swelling, flexible consolidation and waterproofing of fine and coarse loose rock<\/li>\n<li>Injection of waterproofing membrane into foundation soil (curtain injection)<\/li>\n<li>Elastically swellable sealing of structural joints (e.g. tubbing joints)<\/li>\n<li>Sealing of cavities and imperfections in the area of the annular gap<\/li>\n<li>Injection of construction joints via injection tubes\/hoses<\/li>\n<li>Injection of structures with a dry, moist, water-bearing condition during the injection as well as with permanent at least one-sided water exposure after the injection<\/li>\n<\/ul>","properties":"<ul>\n<li>Low-viscosity acrylic-based hydrogel<\/li>\n<li>Very good injectability<\/li>\n<li>Readily controllable injection path propagation thanks to controllable reaction time<\/li>\n<li>Very low application temperature<\/li>\n<li>Reliable sealing\/waterproofing due to high elasticity and good swelling capacity<\/li>\n<li>Durably water-impermeable in moist media<\/li>\n<li>CE conformity according to EN 1504-5: CE U(S2) W(2\/3\/4) (1\/40)<\/li>\n<li>Corresponds to fire class B2 according to DIN 4102 in the injection medium<\/li>\n<li>General building authority approval issued by DIBt for injection into soil and groundwater<\/li>\n<li>Fulfils the UBA (German environmental agency) guidelines for sealants in contact with potable water<\/li>\n<li>High chemical resistance especially in highly alkaline environments<\/li>\n<li>REACH exposure: water contact permanent, inhalation periodic, processing and application<\/li>\n<li>Environmental Product Declaration EPD<\/li>\n<\/ul>","categories":[{"key":"tunnelling-systems","text":"Tunnelling Systems"},{"key":"injection-systems","text":"Injection Systems"},{"key":"injection-systems","text":"Injection Systems"}],"groups":[{"key":"subsoil-injection-and-sealing","text":"Subsoil injection and sealing"},{"key":"tunnel-injections","text":"Tunnel injections"},{"key":"soil-stabilisation-slab-lifting","text":"Soil Stabilisation and Slab Lifting"}],"url":"tunnelling-systems\/subsoil-injection-and-sealing\/mc-montan-injekt-tr-x.html"},{"id":"3dd190165a8cb45cf334e7efa1603e6e","name":"MC-Montan Injekt LE","short_description":"Expansion resin for consolidation, load-bearing capacity increase and sealing of foundation soil as well as for lifting of structures","description":"Fast-reacting and hardening, two-component expansion resin with a mixing ratio of 1:2 parts by volume for increasing the load-bearing capacity and sealing of building ground and for lifting structures. MC-Montan Injekt LE has a water-displacing effect with a high volume increase and is watertight, compression and tension resistant when fully reacted. For increasing the load-bearing capacity of the subsoil by deep injection under buildings and traffic areas, raising and stabilizing structures, stopping heavy water inflows in excavations and filling cavities up to 60 cm in diameter. Particularly suitable for injecting into subsoil and groundwater.","areas_of_applications":"<ul>\n<li>Consolidation of foundation soil in deep soil layers up to approx. 10 m by compacting<\/li>\n<li>Increasing the load-bearing capacity of the building site under structures and traffic areas<\/li>\n<li>Lifting and stabilization of structures by lifting the building site<\/li>\n<li>Stopping extreme water leakages in structures and sewage structures<\/li>\n<li>Cavity filling up to 60 cm in diameter (without aggregate)<\/li>\n<\/ul>","properties":"<ul>\n<li>Low-viscosity polyurethane-based expansion resin<\/li>\n<li>High increase in volume, no resqueezing<\/li>\n<li>Water-displacing<\/li>\n<li>Durable water impermeability<\/li>\n<li>Pressure-resistant, dampening vibrations<\/li>\n<li>Low relaxation<\/li>\n<li>Corresponds to fire class B2 according to DIN 4102 in the injection medium<\/li>\n<li>No lasting effects on soil and groundwater according to the test principles of the DIBt<\/li>\n<li>REACH exposure: water contact permanent, inhalation periodic, processing and application<\/li>\n<\/ul>","categories":[{"key":"injection-systems","text":"Injection Systems"},{"key":"tunnelling-systems","text":"Tunnelling Systems"}],"groups":[{"key":"tunnel-injections","text":"Tunnel injections"},{"key":"subsoil-injection-and-sealing","text":"Subsoil injection and sealing"}],"url":"injection-systems\/tunnel-injections\/mc-montan-injekt-le.html"}] {"67cd8c615eb362c7178b98baae439ab9":[{"id":"b6b140dd1c961680c35cd83e0022393e","name":"MC-Montan Injekt","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_FR_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"},{"id":"fa52790dcd38fa0326587dcd14d3a046","name":"MC-Montan Injekt FR - Komponente A","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_FR_-_Komponente_A_GB_EN_SDS.pdf","type":"sds","typeText":"Safety Datasheets"}],"6dc7c3c63662d9380154f7ccc1c87d0e":[{"id":"b6b140dd1c961680c35cd83e0022393e","name":"MC-Montan Injekt","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_FR_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"},{"id":"fa52790dcd38fa0326587dcd14d3a046","name":"MC-Montan Injekt FR - Komponente A","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_FR_-_Komponente_A_GB_EN_SDS.pdf","type":"sds","typeText":"Safety Datasheets"}],"161e129d65760d2c7e575ff7141a03f3":[{"id":"6d940e24557a3e31506f56d8c204ef6a","name":"MC-Montan Injekt CB","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_CB_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"},{"id":"e2b50c1d475fbc0f98666761e27576bd","name":"MC-Montan Injekt CB - Komponente A","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_CB_-_Komponente_A_GB_EN_SDS.pdf","type":"sds","typeText":"Safety Datasheets"},{"id":"63786a0ad79dd8b4a5b6bcb099bc3d94","name":"MC-Montan Injekt CB - Komponente B","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_CB_-_Komponente_B_GB_EN_SDS.pdf","type":"sds","typeText":"Safety Datasheets"}],"2bfbcbca2761aedd1cccd8f644dd4120":[{"id":"6d940e24557a3e31506f56d8c204ef6a","name":"MC-Montan Injekt CB","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_CB_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"},{"id":"e2b50c1d475fbc0f98666761e27576bd","name":"MC-Montan Injekt CB - Komponente A","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_CB_-_Komponente_A_GB_EN_SDS.pdf","type":"sds","typeText":"Safety Datasheets"},{"id":"63786a0ad79dd8b4a5b6bcb099bc3d94","name":"MC-Montan Injekt CB - Komponente B","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_CB_-_Komponente_B_GB_EN_SDS.pdf","type":"sds","typeText":"Safety Datasheets"}],"3370dcde113cc191731a5113ee002d14":[{"id":"bbcdd2c936dcb39a313125251664be53","name":"MC-Montan Injekt DR","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_DR_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"},{"id":"a24ac4a5276d57997c10dd51a6dfaf67","name":"MC-Montan Injekt DR - Komponente A","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_DR_-_Komponente_A_GB_EN_SDS.pdf","type":"sds","typeText":"Safety Datasheets"}],"ccb6e513a9aff5e1feb29574fc9e0c34":[{"id":"bbcdd2c936dcb39a313125251664be53","name":"MC-Montan Injekt DR","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_DR_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"},{"id":"a24ac4a5276d57997c10dd51a6dfaf67","name":"MC-Montan Injekt DR - Komponente A","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_DR_-_Komponente_A_GB_EN_SDS.pdf","type":"sds","typeText":"Safety Datasheets"}],"7badcd7c21633e1f120b2725984f824a":[{"id":"06a1f066697241df568d4c6d5ccb1e61","name":"MC-Montan Injekt DS","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_DS_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"},{"id":"06337c2338fbe90030b89d771bfdeebf","name":"MC-Montan Injekt DS - Komponente A","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_DS_-_Komponente_A_GB_EN_SDS.pdf","type":"sds","typeText":"Safety Datasheets"}],"baa2cabca4aee2f59927fb77cbfac68c":[{"id":"06a1f066697241df568d4c6d5ccb1e61","name":"MC-Montan Injekt DS","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_DS_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"},{"id":"06337c2338fbe90030b89d771bfdeebf","name":"MC-Montan Injekt DS - Komponente A","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_DS_-_Komponente_A_GB_EN_SDS.pdf","type":"sds","typeText":"Safety Datasheets"}],"ee084f3efce9d142d36a7b36963ec9ee":[{"id":"d0ab472e0c070d942fb3ea83e4a55b2f","name":"MC-Montan Injekt FF","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_FF_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"},{"id":"33decb30a56df595aaa58c1955a04345","name":"MC-Montan Injekt FF","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_FF_DE_RO_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"},{"id":"08ab373add1154ccc3c86e981bcef10e","name":"MC-Montan Injekt FF - Komponente A","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_FF_-_Komponente_A_GB_EN_SDS.pdf","type":"sds","typeText":"Safety Datasheets"}],"62ed5ad3294912e3f7be172089118aef":[{"id":"d0ab472e0c070d942fb3ea83e4a55b2f","name":"MC-Montan Injekt FF","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_FF_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"},{"id":"33decb30a56df595aaa58c1955a04345","name":"MC-Montan Injekt FF","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_FF_DE_RO_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"},{"id":"08ab373add1154ccc3c86e981bcef10e","name":"MC-Montan Injekt FF - Komponente A","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_FF_-_Komponente_A_GB_EN_SDS.pdf","type":"sds","typeText":"Safety Datasheets"}],"afe7de38c77a017fc7a7283d17f125de":[{"id":"d71c2bfcf0c1f83768f0612b0f3c993b","name":"MC-Montan Injekt FN","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_FN_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"},{"id":"d6a08fb315a11adb1e6e8fdb5d45bdf1","name":"MC-Montan Injekt FN - Komponente A","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_FN_-_Komponente_A_GB_EN_SDS.pdf","type":"sds","typeText":"Safety Datasheets"}],"b299a9e1b6ed34fc662fa85b053d3195":[{"id":"d71c2bfcf0c1f83768f0612b0f3c993b","name":"MC-Montan Injekt FN","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_FN_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"},{"id":"d6a08fb315a11adb1e6e8fdb5d45bdf1","name":"MC-Montan Injekt FN - Komponente A","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_FN_-_Komponente_A_GB_EN_SDS.pdf","type":"sds","typeText":"Safety Datasheets"}],"fdc044384e0f96f9e9440529332186e3":[{"id":"f0f41c2c7b19fd0b7b448046b8cc4541","name":"MC-Montan Injekt FS","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_FS_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"},{"id":"e4e55d7e4f5bf1ec309aff8d2e72208f","name":"MC-Montan Injekt FS - Komponente A","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_FS_-_Komponente_A_GB_EN_SDS.pdf","type":"sds","typeText":"Safety Datasheets"}],"ba36b64ce8aac856b032d2b4fe22070b":[{"id":"f0f41c2c7b19fd0b7b448046b8cc4541","name":"MC-Montan Injekt FS","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_FS_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"},{"id":"e4e55d7e4f5bf1ec309aff8d2e72208f","name":"MC-Montan Injekt FS - Komponente A","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_FS_-_Komponente_A_GB_EN_SDS.pdf","type":"sds","typeText":"Safety Datasheets"}],"3dd190165a8cb45cf334e7efa1603e6e":[{"id":"dc43b76765d8b3383b399808518b3d3d","name":"MC-Montan Injekt LE","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_LE_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"},{"id":"e36e953aeb9dd1a4f13719df1ee2324a","name":"MC-Montan Injekt LE - Komponente A","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_LE_-_Komponente_A_GB_EN_SDS.pdf","type":"sds","typeText":"Safety Datasheets"},{"id":"d39e3fefb2b11a39a34c3e19ce184e83","name":"MC-Montan Injekt LE - Komponente B","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_LE_-_Komponente_B_GB_EN_SDS.pdf","type":"sds","typeText":"Safety Datasheets"}],"5c86d9505d8047095b5f68a6886eabc1":[{"id":"dc43b76765d8b3383b399808518b3d3d","name":"MC-Montan Injekt LE","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_LE_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"},{"id":"e36e953aeb9dd1a4f13719df1ee2324a","name":"MC-Montan Injekt LE - Komponente A","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_LE_-_Komponente_A_GB_EN_SDS.pdf","type":"sds","typeText":"Safety Datasheets"},{"id":"d39e3fefb2b11a39a34c3e19ce184e83","name":"MC-Montan Injekt LE - Komponente B","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_LE_-_Komponente_B_GB_EN_SDS.pdf","type":"sds","typeText":"Safety Datasheets"}],"1ad11d7c3750740455fd3ac7b40a4c1f":[{"id":"7321f00ac9fd230cfb6cd7374aa2d8dd","name":"MC-Montan Injekt TR-X","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_TR-X_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"}],"3679318d05871330b845f4fa3dd67476":[{"id":"7321f00ac9fd230cfb6cd7374aa2d8dd","name":"MC-Montan Injekt TR-X","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Montan_Injekt_TR-X_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"}]}