Rigid, non-crack bridging coatings

There are products

Products to compare


Description:
Properties:
Applications:
Downloads:

Talk to a specialist ...

MC-RIM PROTECT

Highly sulphate resistant, fibre-reinforced surface protection for use in wastewater industry

MC-RIM PROTECT-MR

Highly sulphate resistant, fibre-reinforced surface protection for use on mechanically stressed areas in wastewater industry

MC-DUR 2496 CTP Tunnel

Special Polyurethane based sealer

MC-Color Proof pure

Transparent impregnation

MC-Color Proof pro

Transparent concrete protection coating

MC-Color Proof vision

High-performance, transparent concrete protection with integrated easy-to-clean-technology

MC-Color Flair pure

Pigmented coating

MC-Color Flair pro

Pigmented coating based on Core-Shell-Technique

MC-Color Flair vision

High-performance pigmented coating with integrated easy-to-clean-technology

MC-RIM PW 101

Mineral high-performance coating for drinking water areas

MC-RIM PW 301

Pure mineral high-performance coating for horizontal surfaces in drinking water areas

MC-Color T 21

Coloured high-performance coating with integrated 3D technology

MC-RIM PW 111

Pure mineral high-performance coating for drinking water areas

MC-RIM Protect

Revestimento mineral de alta resistência à sulfato reforçado com fibras para impermeabilização e proteção de estruturas de saneamento

MC-Color BS

Ready-to-use, pigmented surface protection system

MC Rim Protect

Highly sulphate resistant, fibre-reinforced surface protection for use in wastewater industry

MC-Color Flair pure

Pigmented coating

[{"id":"aaa7797c5e2aa09b0856dd598be19ac2","name":"MC-RIM PROTECT","short_description":"Highly sulphate resistant, fibre-reinforced surface protection for use in wastewater industry","description":"Single-component, polymer-modified, fiber-reinforced, highly sulfate-resistant, cementitious surface coating for use in wastewater treatment plants. Can be applied by hand and by wet and dry spraying. MC-RIM PROTECT is open to water vapour diffusion, permanently water-resistant, chloride-proof, carbonation-inhibiting and resistant in the pH value range 3.35 to 14. Maximum grain size up to 1.2 mm.\nLayer thickness from 5 to 15 mm. Can be used on concrete, reinforced concrete and prestressed concrete components in stormwater overflow tanks, primary settling tanks, secondary settling tanks, aeration tanks, sand traps, intake structures, sludge thickeners and digestion towers (sludge zone). Particularly applicable for exposure classes XD 1-3, XS 1-3, XC 1-4, XA 1-3, XF 1+3 XWW 1-3 and XWW 4. Class R4 according to DIN EN 1504-3. Certified according to DIN EN 1504-2 and DIN EN 1504-3.\n \n","areas_of_applications":"<ul>\n<li>Surface protection of concrete-, reinforced concrete- and prestressed concrete components (new and existing constructions) in sewage structures<\/li>\n<li>Suitable for rain spillway basins, primary and secondary sedimentation basins, activated sludge tanks, sand traps, screen structures, sludge thickeners, digestion towers (sludge zone)<\/li>\n<li>Suitable for exposure to XD 1-3, XS 1-3, XC1-4, XF 1+3, XA 1-3, XWW 1-3 and XWW4<\/li>\n<li>Certified according to EN 1504 part 2 for principle 1, procedure 1.3 \/ principle 2, procedure 2.2<\/li>\n<li>Certified according to EN 1504 part 3 for principle 3, procedure 3.1 and 3.3<\/li>\n<li>WW-coating mortar according to DIN 19573<\/li>\n<\/ul>","properties":"<ul>\n<li>One-component, polymer-modified<\/li>\n<li>Application by hand and wet or dry spraying<\/li>\n<li>Resistant from pH 14 to pH 3.35<\/li>\n<li>Very high chloride resistance<\/li>\n<li>Carbonation retarding<\/li>\n<li>Open to water vapour diffusion<\/li>\n<li>Impermeable to water and resistant to permanent water exposure<\/li>\n<li>Class R 4 according to EN 1504 part 3<\/li>\n<\/ul>","categories":[{"key":"surface-protection","text":"Surface Protection"}],"groups":[{"key":"rigid-non-crack-bridging-coatings","text":"Rigid, non-crack bridging coatings"}],"url":"surface-protection\/rigid-non-crack-bridging-coatings\/mc-rim-protect.html"},{"id":"872843094f8fbcf6cb8d2e594376a756","name":"MC-RIM PROTECT-MR","short_description":"Highly sulphate resistant, fibre-reinforced surface protection for use on mechanically stressed areas in wastewater industry","description":"Single-component, polymer-modified, fiber-reinforced, highly sulfate-resistant, cementitious surface coating for use on mechanically stressed surfaces in wastewater treatment plants. Can be applied by hand and by wet spraying.\nMC-RIM PROTECT-MR is open to water vapor diffusion, permanently water-resistant, chloride-proof and resistant in the pH value range 3.35 to 14. Highly abrasion-resistant, tested according to B\u00f6hme. Maximum grain size up to 1.2 mm. Layer thickness from 5 to 15 mm. Can be used on concrete, reinforced concrete and prestressed concrete components in inlet and outlet channels, inlet structures and screw lifts (lining of the screw trough).\nParticularly applicable for exposure classes XD 1-3, XS 1-3, XC 1-4, XM 1-2, XA 1-3, XF 1+3 and XWW 1-3. Class R4 according to DIN EN 1504-3. Certified according to DIN EN 1504-3. \n\n","areas_of_applications":"<ul>\n<li>Surface protection of concrete-, reinforced concrete- and prestressed concrete components (new and existing constructions) in sewage structures<\/li>\n<li>Suitable for inlet- and drainage channels, inlet structures, sand traps, screw trough of spiral pumps, scraper trackways<\/li>\n<li>Suitable for exposure to XD 1-3, XS 1-3, XC1-4, XM 1-2, XF 1+3, XA 1-3 and XWW 1-3<\/li>\n<li>Certified according to EN 1504 part 3 for principle 3, procedure 3.1 and 3.3<\/li>\n<\/ul>","properties":"<ul>\n<li>One-component, polymer-modified<\/li>\n<li>Application by hand and wet spraying<\/li>\n<li>Resistant from pH 14 to pH 3.35 <\/li>\n<li>Very high chloride resistance<\/li>\n<li>Open to water vapour diffusion<\/li>\n<li>Impermeable to water and resistant to permanent water exposure<\/li>\n<li>Highly abrasion resistant, tested according to B\u00f6hme<\/li>\n<li>Class R4 according to EN 1504 part 3<\/li>\n<\/ul>","categories":[{"key":"surface-protection","text":"Surface Protection"}],"groups":[{"key":"rigid-non-crack-bridging-coatings","text":"Rigid, non-crack bridging coatings"}],"url":"surface-protection\/rigid-non-crack-bridging-coatings\/mc-rim-protect-mr.html"},{"id":"c807693fbca9d5da3173567f3a05a107","name":"MC-DUR 2496 CTP Tunnel","short_description":"Special Polyurethane based sealer","description":"Two-component, fast-curing reaction resin based on KineticBoost-Technology\u00ae for the surface protection of tunnel walls in particular. Can be used up to 2 \u00b0C and 100 % relative humidity. Film-forming, dries to a glossy finish, open to water vapour diffusion and resistant to carbonation, UV, weather, temperature, frost and de-icing salt. Wet abrasion resistance class 1 according to DIN EN ISO 13300, cleanability characteristic value 0 according to DIN EN ISO 2813, gloss level 40 - 60, LRV value of reflection class 70, flame retardant, building material class C-s1, d0 according to EN 13501-1.","areas_of_applications":"<ul>\n<li>Surface protection in accordance with \u00d6BV, ASTRA, ZTV-ING part 5 \u201dTunnel\u201c<\/li>\n<li>Surface protection for non-accessible and non-driven-on exterior areas<\/li>\n<li>Surface protection of mineral substrates, particularly for protection of inner tunnel shells<\/li>\n<li>Suitable for use in spray- and splash zones of de-icing salts<\/li>\n<li>REACH-assessed exposure scenarios: application, long-term inhalation, periodical water-contact<\/li>\n<li>Certified in accordance with EN 1504 part 2 for principles 1, 2 and 8, procedure 1.3, 2.3 and 8.3<\/li>\n<\/ul>","properties":"<ul>\n<li>Two-component, low-solvent, fast-curing reaction resin<\/li>\n<li>Color-proof, stable against UV and weathering, glossy when dried<\/li>\n<li>Curing not related to temperature and moisture influence<\/li>\n<li>Short waiting time between the working steps<\/li>\n<li>Open to water vapour diffusion and carbonation-retarding<\/li>\n<li>Resistant to elevated temperatures, frost and de-icing salts<\/li>\n<li>According to EN ISO 13300 \u2013 wet abrasion resistance class 1<\/li>\n<li>According to EN ISO 13300 \u2013 cleanability: parameter 0<\/li>\n<li>According to EN ISO 2813 \u2013 gloss level 40 - 60<\/li>\n<li>Reflection value, LRV-value class 70<\/li>\n<li>Low-flammable, building material class C-s1, d0 according to EN 13501-1<\/li>\n<li>Long application time despite accelerated curing<\/li>\n<\/ul>","categories":[{"key":"surface-protection","text":"Surface Protection"}],"groups":[{"key":"rigid-non-crack-bridging-coatings","text":"Rigid, non-crack bridging coatings"}],"url":"surface-protection\/rigid-non-crack-bridging-coatings\/mc-dur-2496-ctp-tunnel.html"},{"id":"ff78a1c4538079e68e37679a47e2c794","name":"MC-Color Proof pure","short_description":"Transparent impregnation","description":"Ready-to-use transparent impregnation based on an aqueous copolymer dispersion. Film-forming, open to water vapour diffusion, inhibits carbonation, UV and weather resistant. Reduces water absorption and improves frost and de-icing salt resistance. Can be applied by roller and airless spraying. Can be used on alkaline and neutral mineral substrates indoors and outdoors. Additional transparent base product for the production of glazes. Proof of AgBB emission test available. Certified according to DIN EN 1504-2.\n","areas_of_applications":"<ul>\n<li>Impregnation of mineral-based component surfaces<\/li>\n<li>Transparent basic product for manufacture of scumbling paints<\/li>\n<li>Suitable for use on alkaline and neutral substrates<\/li>\n<li>Suitable for use on exterior and interior surfaces<\/li>\n<li>Suitable for use in combination with Emcephob WM and Emcephob HC<\/li>\n<li>REACH-assessed exposure scenarios: periodical water-contact, periodical inhalation, application<\/li>\n<li>Certified in accordance with EN 1504 part 2 for principle 1, procedure 1.2<\/li>\n<\/ul>","properties":"<ul>\n<li>Ready-to-use, water-based copolymer dispersion<\/li>\n<li>Slightly film-forming, transparent when dried<\/li>\n<li>Substrate solidification<\/li>\n<li>Open to water vapour diffusion and carbonation-retarding<\/li>\n<li>Reduces water absorption<\/li>\n<li>Increases resistance to frost and de-icing salts<\/li>\n<li>Interior use: certificate for AgBB emission test available<\/li>\n<li>Registered with DGNB (Code: ZXG5G8)<\/li>\n<li>Resistant to UV and weathering<\/li>\n<li>Application by roller and airless spraying<\/li>\n<\/ul>","categories":[{"key":"hydrophobic-agents-and-impregnation","text":"Hydrophobic agents & Impregnation"},{"key":"surface-protection","text":"Surface Protection"}],"groups":[{"key":"impregnation","text":"Impregnation"},{"key":"rigid-non-crack-bridging-coatings","text":"Rigid, non-crack bridging coatings"}],"url":"hydrophobic-agents-and-impregnation\/impregnation\/mc-color-proof-pure.html"},{"id":"6a901a638261529a1aea1e45d9be8276","name":"MC-Color Proof pro","short_description":"Transparent concrete protection coating","description":"Ready-to-use, transparent drying concrete protection coating based on an aqueous copolymer dispersion with very good weather resistance and extremely low dirt absorption. Open to water vapour diffusion, inhibits carbonation, resistant to temperature, frost and de-icing salt. Can be applied by roller and airless spraying. Non-combustible, building material class A2-s1, d0 according to EN 13501-1 (system test). Preventive concrete protection for interior and exterior surfaces that cannot be walked or driven on. Proof of AgBB emission test available. Certified in accordance with DIN EN 1504-2 and tested in accordance with DIN V 18026.\n","areas_of_applications":"<ul>\n<li>Preventive concrete protection for exterior and interior surfaces<\/li>\n<li>Surface protection for non-accessible and non-driven-on exterior areas<\/li>\n<li>Suitable for spray zones of de-icing salts<\/li>\n<li>Suitable for use in combination with Emcephob WM and Emcephob HC<\/li>\n<li>REACH-assessed exposure scenarios: periodical water-contact, periodical inhalation, application<\/li>\n<li>Certified in accordance with EN 1504 part 2 for principles 1, 2 and 8, procedure 1.3, 2.3, 8.3<\/li>\n<\/ul>","properties":"<ul>\n<li>Ready-to-use, water-based copolymer dispersion<\/li>\n<li>Film-forming, matt transparent when dried<\/li>\n<li>Open to water vapour diffusion and carbonation-retarding<\/li>\n<li>Resistant to UV and weathering<\/li>\n<li>Resistant to elevated temperatures, frost and de-icing salts<\/li>\n<li>Application by roller and airless spraying<\/li>\n<li>Low dirt pick-up<\/li>\n<li>Building material class B-s1, d0 according to EN 13501-1 (product system test)<\/li>\n<li>Registered with DGNB (Code: AW5HX5)<\/li>\n<li>Interior use: certificate for AgBB emission test available<\/li>\n<li>Tested and approved as OS 2 surface protection system with Emcephob WM<\/li>\n<\/ul>","categories":[{"key":"surface-protection","text":"Surface Protection"}],"groups":[{"key":"rigid-non-crack-bridging-coatings","text":"Rigid, non-crack bridging coatings"}],"url":"surface-protection\/rigid-non-crack-bridging-coatings\/mc-color-proof-pro.html"},{"id":"51a6c55f8a222c177b029dc529e82039","name":"MC-Color Proof vision","short_description":"High-performance, transparent concrete protection with integrated easy-to-clean-technology","description":"High-quality, transparent concrete protection coating with integrated easy-to-clean technology based on a two-component, water-based polyurethane-polymer combination. Open to water vapour diffusion, resistant to carbonation, temperature, frost and de-icing salt. Can be applied by roller and airless spraying. Non-combustible, building material class A2-s1, d0 according to EN 13501-1 (system test). Fully-fledged concrete protection for exterior surfaces that cannot be walked or driven on. Permanent protection system against color fading. Test certificate in accordance with ZTV-ING, TL\/TP AGS-Beton is available. Certified in accordance with DIN EN 1504-2 and tested in accordance with DIN V 18026. ","areas_of_applications":"<ul>\n<li>Preventive concrete protection for exterior surfaces exposed to weathering<\/li>\n<li>Permanent protection system against graffiti and colour staining<\/li>\n<li>Suitable for use on concrete, plaster, varnished metal surfaces and numerous old coatings<\/li>\n<li>For use on concrete in combination with Emcephob WM or Emcephob HC<\/li>\n<li>REACH-assessed exposure scenarios: periodical water-contact, periodical inhalation, application<\/li>\n<li>Certified in accordance with EN 1504 part 2 for principles 1, 2 and 8, procedure 1.3, 2.3, 8.3<\/li>\n<\/ul>","properties":"<ul>\n<li>Two-component, water-based polyurethane-polymer combination<\/li>\n<li>Film-forming, matt when dried<\/li>\n<li>Resistant to UV and weathering<\/li>\n<li>Resistant to temperature, frost and de-icing salts<\/li>\n<li>Open to water vapour diffusion and carbonation-retarding<\/li>\n<li>Application by roller and airless spraying<\/li>\n<li>Building material class B-s1, d0 according to EN 13501-1 (product system test)<\/li>\n<li>Registered with DGNB (Code: L6YBDD)<\/li>\n<li>Cleaning properties certified according to ZTV-ING, TL\/TP AGS-concrete<\/li>\n<li>Tested and approved as OS 2 surface protection system with Emcephob WM<\/li>\n<\/ul>","categories":[{"key":"surface-protection","text":"Surface Protection"}],"groups":[{"key":"rigid-non-crack-bridging-coatings","text":"Rigid, non-crack bridging coatings"}],"url":"surface-protection\/rigid-non-crack-bridging-coatings\/mc-color-proof-vision.html"},{"id":"79ceed9213a028a2924b4a7749a26d37","name":"MC-Color Flair pure","short_description":"Pigmented coating","description":"Ready-to-use, pigmented coating based on a self-crosslinking, aqueous copolymer dispersion with low dirt absorption. Color stable, UV and weather resistant. Open to water vapour diffusion, inhibits carbonation, resistant to temperature, frost and de-icing salt. Can be applied by roller and airless spraying. Non-combustible, building material class A2-s1, d0 according to EN 13501-1 (system test). DGNB-registered (registration code: SHANCT). Complete surface protection for non-trafficable and trafficable surfaces in the spraying and spraying area of de-icing salts. Certified in accordance with DIN EN 1504-2 and DIN V 18026 in the OS 2 and OS 4 structure.","areas_of_applications":"<ul>\n<li>Preventive concrete protection for exterior surfaces exposed to weathering<\/li>\n<li>Surface protection for non-accessible and non-driven-on exterior areas<\/li>\n<li>Suitable for spray and splash zones of de-icing salts<\/li>\n<li>REACH-assessed exposure scenarios: periodical water-contact, periodical inhalation, application<\/li>\n<li>Certified in accordance with EN 1504 part 2 for principles 1, 2 and 8, procedure 1.3, 2.3, 8.3<\/li>\n<\/ul>","properties":"<ul>\n<li>Ready-to-use, water-based copolymer dispersion<\/li>\n<li>Film-forming, matt when dried<\/li>\n<li>Open to water vapour diffusion and carbonation-retarding<\/li>\n<li>Colour-proof as resistant to UV and weathering<\/li>\n<li>Resistant to elevated temperatures, frost and de-icing salts<\/li>\n<li>Non-flammable, building material class A2-s1, d0 according to EN 13501-1 (product system test)<\/li>\n<li>Registered with DGNB (Code: SHANCT)<\/li>\n<li>Resistant to staining<\/li>\n<li>Application by roller and airless spraying<\/li>\n<li>Tested and approved as OS 2 and OS 4 surface protection system<\/li>\n<\/ul>","categories":[{"key":"surface-protection","text":"Surface Protection"}],"groups":[{"key":"rigid-non-crack-bridging-coatings","text":"Rigid, non-crack bridging coatings"}],"url":"surface-protection\/rigid-non-crack-bridging-coatings\/mc-color-flair-pure.html"},{"id":"1b46906f0a35bfd230382ff650eeb994","name":"MC-Color Flair pro","short_description":"Pigmented coating based on Core-Shell-Technique","description":"Ready-to-use, self-crosslinking, aqueous, pigmented copolymer coating based on core-shell technology with excellent color stability, extremely low dirt pick-up and integrated greening protection. UV and weather resistant, open to water vapour diffusion, carbonation inhibiting, temperature, frost and de-icing salt resistant. Can be applied by roller and airless spraying. Non-combustible, building material class A2-s1, d0 according to EN 13501-1 (system test). Complete surface protection for surfaces that cannot be walked or driven on in the spraying and spraying area of de-icing salts. DGNB-registered (registration code: SUUZSK). Certified in accordance with DIN EN 1504-2 and DIN V 18026 in the OS 2 and OS 4 structure.","areas_of_applications":"<ul>\n<li>Preventive concrete protection for exterior surfaces exposed to weathering<\/li>\n<li>Surface protection for non-accessible and non-driven-on exterior areas<\/li>\n<li>Suitable for spray and splash zones of de-icing salts<\/li>\n<li>REACH-assessed exposure scenarios: periodical water-contact, periodical inhalation, application<\/li>\n<li>Certified in accordance with EN 1504 part 2 for principles 1, 2 and 8, procedure 1.3, 2.3, 8.3<\/li>\n<\/ul>","properties":"<ul>\n<li>Ready-to-use, water-based copolymer dispersion<\/li>\n<li>Film-forming, matt when dried<\/li>\n<li>Open to water vapour diffusion and carbonation-retarding<\/li>\n<li>Colour-proof as resistant to UV and weathering<\/li>\n<li>Resistant to elevated temperatures, frost and de-icing salts<\/li>\n<li>Extremely low dirt pick-up<\/li>\n<li>Integrated anti-fungal technology<\/li>\n<li>Non-flammable, building material class A2-s1, d0 according to EN 13501-1 (product system test)<\/li>\n<li>Registered with DGNB (Code: SUUZSK)<\/li>\n<li>Application by roller and airless spraying<\/li>\n<li>Tested and approved as OS 2 and OS 4 surface protection system<\/li>\n<\/ul>","categories":[{"key":"surface-protection","text":"Surface Protection"}],"groups":[{"key":"rigid-non-crack-bridging-coatings","text":"Rigid, non-crack bridging coatings"}],"url":"surface-protection\/rigid-non-crack-bridging-coatings\/mc-color-flair-pro.html"},{"id":"379053336c54bc60415429d83c2b9c4e","name":"MC-Color Flair vision","short_description":"High-performance pigmented coating with integrated easy-to-clean-technology","description":"High-quality, pigmented coating with integrated easy-to-clean technology based on a two-component, water-based polyurethane\/polymer combination. Color stable due to UV and weather resistance. Open to water vapour diffusion, resistant to carbonation, temperature, frost and de-icing salt. Can be applied by roller and airless spraying. Non-combustible, building material class A2-s1, d0 according to EN 13501-1 (system test). DGNB-registered (registration code: NM4PTD). Full-value concrete protection for non-trafficable and trafficable surfaces in the spraying and spraying area of de-icing salts. Permanent protection system against color degradation. Test certificate according to ZTV-ING, TL\/TP AGS-Beton is available. Certified in accordance with DIN EN 1504-2 and DIN V 18026 in the OS 2 and OS 4 structure. Approved concrete protection system in accordance with ZTV-ING, Part 5 for tunnel structures.","areas_of_applications":"<ul>\n<li>Preventive concrete protection for exterior surfaces exposed to weathering<\/li>\n<li>Special surface protection for traffic structures (bridge, tunnel)<\/li>\n<li>Surface protection for non-accessible and non-driven-on exterior areas<\/li>\n<li>Application by roller and airless spraying<\/li>\n<li>Permanent protection system against graffiti and colour staining<\/li>\n<li>REACH-assessed exposure scenarios: periodical water-contact, periodical inhalation, application<\/li>\n<li>Certified in accordance with EN 1504 part 2 for principles 1, 2 and 8, procedure 1.3, 2.3, 8.3<\/li>\n<\/ul>","properties":"<ul>\n<li>Two-component, water-based polyurethane-polymer combination<\/li>\n<li>Film-forming, slightly glossy when dried<\/li>\n<li>Open to water vapour diffusion and carbonation-retarding<\/li>\n<li>Colour-proof as resistant to UV and weathering<\/li>\n<li>Resistant to elevated temperatures, frost and de-icing salts<\/li>\n<li>According to DIN EN ISO 13300 - wet abrasion resistance class 1<\/li>\n<li>According to DIN EN ISO 13300 - cleanability: parameter 0<\/li>\n<li>According to DIN EN ISO 2813 - gloss level 40 - 60<\/li>\n<li>Reflection value, LRV-value class 70<\/li>\n<li>Cleaning properties certified according to ZTV-ING, TL\/TP AGS-concrete<\/li>\n<li>Non-flammable, building material class A2-s1, d0 according to EN 13501-1 (product system test)<\/li>\n<li>Registered with DGNB (Code: NM4PTD)<\/li>\n<li>Tested and approved as OS 2 with Emcephob WM and as OS 4 surface protection system with fine mortar systems<\/li>\n<\/ul>","categories":[{"key":"surface-protection","text":"Surface Protection"}],"groups":[{"key":"rigid-non-crack-bridging-coatings","text":"Rigid, non-crack bridging coatings"}],"url":"surface-protection\/rigid-non-crack-bridging-coatings\/mc-color-flair-vision.html"},{"id":"f3b53272256d79663b9514f31b5985b7","name":"MC-RIM PW 101","short_description":"Mineral high-performance coating for drinking water areas","description":"","areas_of_applications":"<ul>\n<li>Surface protection for wall- and overhead areas in drinking water reservoirs, drinking water purification plants and concrete components in drinking water protection zones<\/li>\n<li>Suitable for concrete components in statically relevant and non-statically relevant areas<\/li>\n<li>Suitable for exposure class XTWB<\/li>\n<li>Certified according to EN 1504 part 3 for principle 3 and 7, procedure 3.1, 3.3 and 7.1<\/li>\n<\/ul>","properties":"<ul>\n<li>Based on DySC\u00ae-technology<\/li>\n<li>Cement-bound, only to be mixed with water<\/li>\n<li>Application by hand and wet spraying technique<\/li>\n<li>Open to water vapour diffusion and impermeable to water<\/li>\n<li>Highly sulphate resistant and chloride-proof<\/li>\n<li>Low porosity, thus high resistance against hydrolysis<\/li>\n<li>Tested and approved according to DVGW-leaflet W 347 Type 2<\/li>\n<li>Fulfills the requirements of DVGW-leaflet W 270 and W 300-5 (A)<\/li>\n<li>Certified and externally monitored according to \u00d6VGW<\/li>\n<li>Class R4 according to EN 1504 part 3<\/li>\n<\/ul>","categories":[{"key":"surface-protection","text":"Surface Protection"}],"groups":[{"key":"rigid-non-crack-bridging-coatings","text":"Rigid, non-crack bridging coatings"}],"url":"surface-protection\/rigid-non-crack-bridging-coatings\/mc-rim-pw-101.html"},{"id":"312f30c193ef3de6d5cdfaee76afb3b8","name":"MC-RIM PW 301","short_description":"Pure mineral high-performance coating for horizontal surfaces in drinking water areas","description":"Cement-bonded, hand-applied high-performance coating for horizontal surfaces in the drinking water sector. Based on DySC technology. Purely mineral, to be mixed with water only. MC-RIM PW 301 is open to water vapor diffusion, impermeable to water and chloride-proof. The water\/cement ratio is less than 0.5, the fresh mortar air void content is less than 5 % by volume and the porosity is less than 6 % by volume. Maximum grain size up to 3 mm. Layer thickness from 12 to 40 mm. Can also be used as a concrete substitute. Approved in accordance with DVGW worksheets W 270, W 300 and W 347 as well as DIN EN 1504-3 for class R4.\n","areas_of_applications":"<ul>\n<li>Surface protection for horizontal surfaces in drinking water reservoirs, drinking water purification plants and concrete components in drinking water protection zones<\/li>\n<li>Suitable for concrete components in statically relevant and non-statically relevant areas<\/li>\n<li>Suitable for exposure classes XALL, XO and XTWB<\/li>\n<li>Also suitable for creation of covings<\/li>\n<li>Certified and classified according to EN 1504 part 3 for principle 3 and 7, procedure 3.1, 7.1 and 7.4<\/li>\n<\/ul>","properties":"<ul>\n<li>Based on DySC\u00ae-technology<\/li>\n<li>Cement-bound, only to be mixed with water<\/li>\n<li>Can be used for exposure classes XA1, XD1 and XC1<\/li>\n<li>Classified as type 1 in accordance with DVGW-leaflet W 300<\/li>\n<li>Tested and approved according to DVGW-leaflet W 347<\/li>\n<li>Type 1 does not require any approval in accordance with DVGW-leaflet W 270<\/li>\n<li>Certified and externally monitored according to \u00d6VGW<\/li>\n<li>Suitable for exposure class XTWB<\/li>\n<li>Application by hand<\/li>\n<li>Open to water vapour diffusion and impermeable to water<\/li>\n<li>Highly sulphate resistant and chloride-proof<\/li>\n<li>Low porosity, thus high resistance against hydrolysis<\/li>\n<li>Registered with DGNB (Code: Y66XNN)<\/li>\n<li>Class R4 according to EN 1504 part 3<\/li>\n<\/ul>","categories":[{"key":"surface-protection","text":"Surface Protection"}],"groups":[{"key":"rigid-non-crack-bridging-coatings","text":"Rigid, non-crack bridging coatings"}],"url":"surface-protection\/rigid-non-crack-bridging-coatings\/mc-rim-pw-301.html"},{"id":"e9f3dadf1dc78fb20d4fc6bcacd6ed47","name":"MC-Color T 21","short_description":"Coloured high-performance coating with integrated 3D technology","description":"Ready-to-use, water-based acrylic dispersion with integrated 3D technology,\nfor the surface protection of tunnel inner walls and for all building and engineering structures.\nMeets all requirements of a surface protection system and additional requirements for tunnel structures in the D-A-CH region. Film-forming, dries quickly and glossy, open to water vapour diffusion and carbonation inhibiting, UV, weather, temperature, frost and de-icing salt resistant. Wet abrasion resistance class 1 according to DIN EN ISO 13300, cleanability characteristic value 0 according to DIN EN ISO 2813, gloss level 40 - 60, LRV value of reflection class 70, flame-retardant, extremely dirt-repellent surface, building material class C-s1, d0 according to EN 13501-1.\n","areas_of_applications":"<ul>\n<li>Surface protection according to \u00d6BV, ASTRA, ZTV-ING Part 5 Tunnel<\/li>\n<li>Preventive concrete protection for outdoor surfaces exposed to weathering<\/li>\n<li>Surface protection for non-accessible and non-driven-on exterior areas<\/li>\n<li>Suitable for use in spray- and splash zones of de-icing salts<\/li>\n<li>EN 1504 Part 2 for principles 1, 2 and 8, procedures 1.3, 2.3 and 8.3<\/li>\n<li>REACH-rated exposure scenarios: Water contact periodic, Inhalation periodic, Processing<\/li>\n<\/ul>","properties":"<ul>\n<li>Ready-to-use, water-based acrylic dispersion with integrated 3D Technology<\/li>\n<li>Film-forming, dries glossy<\/li>\n<li>Open to water vapour diffusion and inhibits carbonation<\/li>\n<li>Colour-proof, as resistant to UV- and weathering<\/li>\n<li>Extremely low dirt pick-up<\/li>\n<li>According to DIN EN ISO 2813 - gloss level 40-60<\/li>\n<li>Reflectance value, LRV value class 70<\/li>\n<li>According to DIN EN ISO 13300 wet abrasion resistance class 1<\/li>\n<li>According to DIN EN ISO 13300 Cleanability characteristic value 0<\/li>\n<li>Can be applied by roller and airless spraying<\/li>\n<li>Tested and approved as OS 2 and OS 4 surface protection system<\/li>\n<li>Temperature, frost and de-icing salt resistant (XF 4)<\/li>\n<li>Registered with DGNB (Code: Q0GFCH)<\/li>\n<li>Non-flammable, building material class A2-s1, d0 according to EN 13501-1 (system test with Nafufill KM 103)<\/li>\n<li>Non-flammable, building material class C-s1, d0 according to EN 13501-1 (system test with Nafufill R3 FM)<\/li>\n<\/ul>","categories":[{"key":"surface-protection","text":"Surface Protection"}],"groups":[{"key":"rigid-non-crack-bridging-coatings","text":"Rigid, non-crack bridging coatings"}],"url":"surface-protection\/rigid-non-crack-bridging-coatings\/mc-color-t-21.html"},{"id":"807e9da809f24b3919139355ac0a26a2","name":"MC-RIM PW 111","short_description":"Pure mineral high-performance coating for drinking water areas","description":"Cementitious, hand and wet sprayable coating for use on wall and ceiling surfaces in drinking water areas. Purely mineral (type 1), to be mixed with water only. MC-RIM PW 111 inhibits carbonation, is open to water vapour diffusion and impermeable to water. The total porosity after 28 days is less than 8% and after 90 days less than 6%. The maximum grain size is 1.2 mm and the mortar can be applied in layer thicknesses of 8 to 15 mm. MC-RIM PW 111 is certified and approved in accordance with DVGW worksheets W 347 and W 300-5 as well as DIN EN 1504-3 for class R4.","areas_of_applications":"<ul>\n<li>Surface protection for wall- and overhead areas in drinking water reservoirs, drinking water purification plants and concrete components in drinking water protection zones<\/li>\n<li>Suitable for concrete components in statically relevant and non-statically relevant areas<\/li>\n<li>Applicable for exposure XTWB<\/li>\n<li>Certified according to EN 1504 part 3 for principle 3 and 7, procedure 3.1, 3.3, 7.1 and 7.4<\/li>\n<\/ul>","properties":"<ul>\n<li>Cement-bound, only to be mixed with water<\/li>\n<li>Application by hand and wet spraying technique<\/li>\n<li>Impermeable to water and chloride-proof<\/li>\n<li>Low porosity, thus high resistance against hydrolysis<\/li>\n<li>Registered with DGNB (Code: 00V0Z3)<\/li>\n<li>Can be used for exposure classes XA1, XD1 and XC1<\/li>\n<li>Tested and approved according to DVGW-leaflet W 347 as Type 1<\/li>\n<li>Classified according to DVGW-leaflet W 300-5 (A)<\/li>\n<li>Certified and externally monitored according to \u00d6VGW<\/li>\n<li>Class R4 according to EN 1504 part 3<\/li>\n<\/ul>","categories":[{"key":"surface-protection","text":"Surface Protection"}],"groups":[{"key":"rigid-non-crack-bridging-coatings","text":"Rigid, non-crack bridging coatings"}],"url":"surface-protection\/rigid-non-crack-bridging-coatings\/mc-rim-pw-111.html"},{"id":"f438771da5677f730d9f948001db00ec","name":"MC-RIM Protect","short_description":"Revestimento mineral de alta resist\u00eancia \u00e0 sulfato refor\u00e7ado com fibras para impermeabiliza\u00e7\u00e3o e prote\u00e7\u00e3o de estruturas de saneamento","description":"","areas_of_applications":"<ul>\n<li>Prote\u00e7\u00e3o superficial de elementos de concreto armado e pr\u00e9-moldados novos e existentes em estruturas de saneamento <\/span><\/li>\n<li>Estruturas de canal de adu\u00e7\u00e3o, gradeamento, decantadores prim\u00e1rios e secund\u00e1rios; <\/span><\/li>\n<li>Bacias de escoamento pluvial, tanques de lodo ativado, desarenadores, espessadores e para a zona l\u00edquida de digestores<\/span><\/li>\n<li>Recomendado para utiliza\u00e7\u00e3o em estruturas com exposi\u00e7\u00e3o \u00e0s classes de agressividade ambiental (CAA) de I a IV de acordo com a NBR 6118:2014 <\/span><\/li>\n<li>Recomendado para exposi\u00e7\u00e3o \u00e0s CAA de XD 1 a 3, XS 1 a 3 e XA 1 a 3 de acordo com a norma Europeia - EN 206<\/span><\/li>\n<li>Certificado de acordo com Norma Europeia - EN 1504 parte 2 para princ\u00edpio 1, procedimento 1.3 \/ princ\u00edpio 2, procedimento 2.2 e Parte 3 para princ\u00edpio 3, procedimento 3.1 e 3.3<\/span><\/li>\n<\/ul>","properties":"<ul>\n<li>Aberto a difus\u00e3o de Vapor<\/span><\/li>\n<li>\u00danico componente<\/span><\/li>\n<li>Resistente a uma varia\u00e7\u00e3o de pH 3,35 a 14<\/span><\/li>\n<li>Classifica\u00e7\u00e3o R4 de acordo com a Norma Europ\u00e9ia EN \u2013 1504 \u2013 parte 3 <\/span><\/li>\n<li>Efeito de prote\u00e7\u00e3o que retarda a carbonata\u00e7\u00e3o do concreto<\/span><\/li>\n<li>Aplica\u00e7\u00e3o manual ou via proje\u00e7\u00e3o<\/span><\/li>\n<li>Alt\u00edssima resist\u00eancia aos ataques de cloretos e sulfatos<\/span><\/li>\n<li>Avaliado de acordo com cen\u00e1rios de exposi\u00e7\u00e3o REACh: inala\u00e7\u00e3o peri\u00f3dica e aplica\u00e7\u00e3o<\/span><\/li>\n<\/ul>","categories":[{"key":"surface-protection","text":"Surface Protection"}],"groups":[{"key":"rigid-non-crack-bridging-coatings","text":"Rigid, non-crack bridging coatings"}],"url":"surface-protection\/rigid-non-crack-bridging-coatings\/mc-rim-protect.html"},{"id":"8fb61cb8250a37110c682fef5b39b0fb","name":"MC-Color BS","short_description":"Ready-to-use, pigmented surface protection system","description":"Ready-to-use, pigmented coating based on an aqueous copolymer dispersion. Dries to a matt finish. Color stable, as UV and weather resistant. Open to water vapour diffusion, inhibits carbonation, resistant to temperature, frost and de-icing salt. Can be applied by roller and airless spraying. Non-combustible, building material class A2-s1, d0 according to EN 13501-1 (system test). Complete surface protection for surfaces that cannot be walked or driven on in the spraying and spraying area of de-icing salts. Certified in accordance with DIN EN 1504-2 and DIN V 18026 in the OS 2 and OS 4 structure.","areas_of_applications":"<ul>\n<li>Preventive concrete protection for exposed surfaces<\/li>\n<li>Surface protection for outdoor areas that cannot be walked or driven<\/li>\n<li>Architectural colour design for concrete structures<\/li>\n<li>Can be used in the spray area of de-icing salts<\/li>\n<li>REACh-rated exposure scenarios: Periodic water contact, periodic inhalation, processing<\/li>\n<li>Certified in accordance with DIN EN 1504 Part 2 for principles 1, 2 and 8, methods 1.3, 2.3 and 8.3<\/li>\n<\/ul>","properties":"<ul>\n<li>Aqueous copolymer<\/li>\n<li>Dries to a matt finish<\/li>\n<li>Weather and UV stable<\/li>\n<li>Temperature and freeze-thaw resistant<\/li>\n<li>Open to water vapour diffusion and inhibits carbonation<\/li>\n<li>Tested and approved in accordance with DIN V 18026, in OS 2 and OS 4 Systems<\/li>\n<li>Certified in accordance with EN 1504 Part 2<\/li>\n<li>Can be applied by rolling and spraying<\/li>\n<li>Non-flammable, building material class A2-s1, d0 in accordance with EN 13501-1 (system test)<\/li>\n<\/ul>","categories":[{"key":"surface-protection","text":"Surface Protection"}],"groups":[{"key":"rigid-non-crack-bridging-coatings","text":"Rigid, non-crack bridging coatings"}],"url":"surface-protection\/rigid-non-crack-bridging-coatings\/mc-color-bs.html"},{"id":"e5467b7be38a16b93c773c98a023c564","name":"MC Rim Protect ","short_description":"Highly sulphate resistant, fibre-reinforced surface protection for use in wastewater industry ","description":"","areas_of_applications":"Surface protection of concrete-, reinforced concrete- and prestressed concrete components (new and existing constructions) in sewage structures. Suitable for rain spillway basins, primary and secondary sedimentation basins, activated sludge tanks, sand traps, screen structures, sludge thickeners, digestion towers (sludge zone). Suitable for exposure to XD 1-3, XS 1-3, XC1-4, XF 1+3, XA 1-3, XWW 1-3 and XWW4. Certified according to EN 1504 part 2 for principle 1, procedure 1.3 \/ principle 2, procedure 2.2. Certified according to EN 1504 part 3 for principle 3, procedure 3.1 and 3.3. WW-coating mortar according to DIN 19573.","properties":"One-component, polymer-modified Application by hand and wet or dry spraying Resistant from pH 14 to pH 3.35 Very high chloride resistance Carbonation retarding Open to water vapour diffusion Impermeable to water and resistant to permanent water exposure Class R 4 according to EN 1504 part 3","categories":[{"key":"surface-protection","text":"Surface Protection"}],"groups":[{"key":"rigid-non-crack-bridging-coatings","text":"Rigid, non-crack bridging coatings"}],"url":"surface-protection\/rigid-non-crack-bridging-coatings\/mc-rim-protect.html"},{"id":"ae7dff8aa4d8a3a5d68c8425dc9b44ff","name":"MC-Color Flair pure","short_description":"Pigmented coating","description":"","areas_of_applications":"<ul id=\"yui_patched_v3_11_0_1_1744619084219_822\">\n<li>Preventive concrete protection for exterior surfaces exposed to weathering<\/li>\n<li>Surface protection for non-accessible and non-driven-on exterior areas<\/li>\n<li>Suitable for spray and splash zones of de-icing salts<\/li>\n<li>REACH-assessed exposure scenarios: periodical water-contact, periodical inhalation, application<\/li>\n<li>Certified in accordance with EN 1504 part 2 for principles 1, 2 and 8, procedure 1.3, 2.3, 8.3<\/li>\n<\/ul>","properties":"<ul id=\"yui_patched_v3_11_0_1_1744619084219_733\">\n<li>Ready-to-use, water-based copolymer dispersion<\/li>\n<li>Film-forming, matt when dried<\/li>\n<li>Open to water vapour diffusion and carbonation-retarding<\/li>\n<li>Colour-proof as resistant to UV and weathering<\/li>\n<li>Resistant to elevated temperatures, frost and de-icing salts<\/li>\n<li id=\"yui_patched_v3_11_0_1_1744619084219_732\">Non-flammable, building material class A2-s1, d0 according to EN 13501-1 (product system test)<\/li>\n<li>Registered with DGNB (Code: SHANCT)<\/li>\n<li>Resistant to staining<\/li>\n<li>Application by roller and airless spraying<\/li>\n<li>Tested and approved as OS 2 and OS 4 surface protection system<\/li>\n<\/ul>","categories":[{"key":"surface-protection","text":"Surface Protection"}],"groups":[{"key":"rigid-non-crack-bridging-coatings","text":"Rigid, non-crack bridging coatings"}],"url":"surface-protection\/rigid-non-crack-bridging-coatings\/mc-color-flair-pure.html"}]