Surface finish

Surface finish

Want to upgrade your screed? Then look at our impregnating products, sealants and coatings specifically developed for screed applications.

There are products

Products to compare

MC-Estripox
MC-Estripox pro
MC-Estripox protect
MC-Estrifan Color Protect Pro
MC-Estrifan Color Protect
MC-Estrifan Color
MC-Screed Protect RM4
MC-Estrifan UP
MC-Estrifan D
MC-Estrifan SI
Description: Transparent, sand-miscible epoxy resin Transparent universal resin (formerly MC-Estrifan UP) Solvent free, pigmented epoxy resin (formerly MC-Estrifan HB) Two-component pigmented polyurethane floor sealant One-component pigmented floor sealant Pigmented glaze for absorbent, mineral substrates Sealing for cement screeds with high residual moisture for adjustment of the moisture balance Solvent-free, transparent epoxy resin Aqueous, two-component epoxy resin sealing Silicate-based impregnating improvement of mineral-based surfaces
Properties:
  • Two-component
  • Pre-filled with fine quartzsand
  • Miscible with mineral aggregates
  • Easy-levelling mortar
  • Good adhesion on mineral substrates
  • Two-component
  • Low viscosity
  • Transparent
  • Solvent-free
  • Very good adhesion on mineral substrates
  • Highly miscible with kiln-dried filler aggregates
  • Two component epoxy resin
  • Solvent free • Coloured, approx. RAL 7032
  • Good adhesion to mineral substrates
  • Coating with high scuff resistance
  • Two-component
  • Water-based
  • Good resistance to soiling, staining and chemical attack
  • Good tyre resistance
  • High surface hardness
  • Good adhesion on mineral substrates
  • Excellent application properties
  • Roll-on or brush-on
  • Certified to EN 1504-2, Part 1.3 Protection Against Ingress, and Part 5.1 Physical Resistance
  • Complies with German AgBB requirements (health safety of building products)
  • One-component
  • Water-based
  • Good stain resistance
  • Good adhesion on mineral substrates
  • Excellent application properties
  • Roll-on or brush-on
  • Certified to EN 1504-2, Part 1.3 Protection Against Ingress, and Part 5.1 Physical Resistance
  • Complies with German AgBB requirements (health safety of building products)
  • One-component
  • Ready-to-use
  • Resistant to UV and weathering
  • Water-vapour-permeable
  • Resistant to frost and de-icing salt to EN 13687-1
  • Retains the natural structure of the substrate
  • Roll-on, brush-on and sprayable
  • One-component polyurethane sealing
  • Good moisture-barrier properties
  • Quickly recoatable
  • Short drying time
  • Low VOC acc. to AgBB and GEV, EMICODE class EC1 Plus
  • Certified and classified as coating for adjustment of the moisture balance acc. to EN 1504-2, principles 2 and 8, procedures 2.2 and 8.2
  • Two-component epoxy resin
  • Low viscosity
  • Very good adhesion to mineral substrates
  • Highly fillable with oven-dried quartz sand - Transparent - Solvent-free
  • Based on epoxy resin
  • Two-component
  • Water-dispersed
  • Solvent-free
  • Resistant to mechanical load
  • Resistant to chemical influence, such as water load, diluted alkalis and acids, oil and petrol - Adheres even to matt-damp (without visible moisture) mineral substrates
  • Ready to use - lncreases abrasion resistance - lncreases the pull-off strength and the surface tensile strength
  • Has an hydrophobic effect
  • lncreases frost-thaw-salt resistance - Solidifies dusting or sandy substrates
  • Certified acc. to EN 1504-2
Applications:
  • Binder for epoxy resin based mortars
  • Bonding agent for compound screeds
  • Primer for application on mineral substrates
  • Priming of concrete and screed surfaces
  • Binding agent for epoxy resin mortars
  • Rigid filling of cracks in concrete and screeds
  • Bond coat for composite screeds
  • Bonding layer for cementitions substrates
  • Bonding layer between old and fresh concrete
  • Grouting of voids and cavities in screed
  • Coating of cement screeds
  • Damp-proofing for increase humidity (< 6 CM %)
  • For sealing mineral substrates
  • For the surface refinement of epoxy- and polyurethane-based floor coating systems
  • For the sealing and refinement of industrial floors exposed to average levels of chemical attack and mechanical stress
  • Protection and refinement of mineral screed and concrete floors
  • For easy-to-clean surfaces, e.g. in workshops, manufacturing bays and storage rooms
  • For the pigmentation and refurbishment of mineral substrates such as screed and concrete floors
  • For the pigmentation and refurbishment of concrete slabs and paving blocks
  • Suitable for interior and exterior applications
  • Sealing of mineral substrates with a residual moisture of ? 4.0% (patent EP 0911306 B1)
  • Suitable for cement screeds, dry mix and flowable
  • Suitable for heated screeds
  • Suitable for MC-Estrifan ECE 20 flow screed system
  • Primer on screeds
  • Binder for epoxy resin mortars, scratch, cavity and repair fillings

 
  • Transparent sealing of cement screeds
  • Coloured coating of screed and concrete floors - Sealing of screed and concrete floors at industrial area
  • lmpregnation of cement-based surfaces, such as concrete and screed
  • lmpregnation of industrial floorings
  • Wet curing of indoor concrete and screed surfaces

 
Downloads:

Talk to a specialist ...

Filter products by:

Properties

Applications

MC-Estripox

Transparent, sand-miscible epoxy resin

MC-Estripox pro

Transparent universal resin (formerly MC-Estrifan UP)

MC-Estripox protect

Solvent free, pigmented epoxy resin (formerly MC-Estrifan HB)

MC-Estrifan Color Protect Pro

Two-component pigmented polyurethane floor sealant

MC-Estrifan Color Protect

One-component pigmented floor sealant

MC-Estrifan Color

Pigmented glaze for absorbent, mineral substrates

MC-Screed Protect RM4

Sealing for cement screeds with high residual moisture for adjustment of the moisture balance

MC-Estrifan UP

Solvent-free, transparent epoxy resin

MC-Estrifan D

Aqueous, two-component epoxy resin sealing

MC-Estrifan SI

Silicate-based impregnating improvement of mineral-based surfaces
References
Magazine
MC-Pedia
Contact
News
Cookie settings

We are continuously improving our website and we use cookies for this purpose. For an optimal user experience, we recommend that you accept them. Otherwise, parts of the page will be deactivated in the display in accordance with data protection regulations.

Essential

Essential cookies for the website to work properly.

Always active
Analytics

We collect data in order to analyze user behavior on the site. This data will be evaluated to provide a better user experience and make you find what you need faster and easier.

Marketing

We analyze marketing data, for example if you found our site through a marketing campaign. We provide information about success or abandoned carts to better understand if you are interested in a certain product or not.

Comfort

Services that make using our site easier but that are not technically necessary. This includes Google Maps for easy location information, YouTube for embedded videos but also the use of contact forms, which are protected from Spam Using Google ReCaptcha.