Masonry waterproofing

From reactive waterproofing systems and sealing slurries to damp-proof course barriers, we provide durable solutions for the retrospective external and internal waterproofing of masonry structures.

There are products

Products to compare

	Nafufill RM 10	Emcephob HSL-W	Emcephob HSC	MC-Proof 501 flex	MC-Proof 101 HS	MC-Injekt GL-95 TR	MC-Proof eco	MC-Proof one
Description:	Microsilica-modified sealing and leveling mortar	Horizontal barrier against capillary rising damp (formerly OXAL HSL-W)	Injection cream for the creation of horizontal barriers in masonry (formerly OXAL HSC)	Two-component flexible waterproofing grout	Sulphate-resistant Waterproofing Grout forthe repair of wet and salt-loaded masonry (formerly OXAL DS/HS)	Soft Elastic Injection Resin	Fast hardening, flexible and bituminous-free, economical two-component waterproofing (formerly Expert Proof eco)	The new green bitumen-free waterproofing of buildingsincorporating the EHS technlogy (formerly Expert Proof one)
Properties:	One-component, only to be mixed with water Application by hand and wet spraying technique Resistant to temperature, frost-thaw and de-icing salts High water retention Low active alkali content, highly sulphate-resistant binder Open to water diffusion and impermeable to water Non-flammable according to EN 13501-1 - building material class A1 Registered with DGNB (Code: MV8B6V) Class R1 according to EN 1504 part 3	One-component Highly hydrophobizing Water-based Optimal penetraation capability Injection into structures with a moisture level of up to ≤ 95 % Low-pressure injection (e.g. Oxal Easy Inject) Self-cross-linking after injection	Hydrophobic cream based on silane as injection cream (masonry) Ready-to-use, aqueous, solvent-free, non-film forming High resistance to alkalis Optimized for a highly yielding, pressure less injection via horizontal boreholes Certified according to WTA	Two-component Resistant to alkali and frost Impermeable to water up to 1 bar (positive pressure) Flexible and crack-bridging Open to diffusion Excellent application properties Protection against corrosive substances	One-component Highly sulphate resistant Impermeable to water up to 1 bar (positive and negative pressure) Resistant to alkali and frost Easy application	Low-viscosity, acrylic-based hydro-structure resin with short, controllable reaction time Highly flexible during service life and swerlable when exposed to water Impermeable to water Resistant to frost-thaw cycies Excellent bonding an dry and moist substrates Fulfils UBA-guideline for sealings in contact with drinking water General technical approval for injection into ground and ground-water (curtain injection) Fulfils the requirements of WTA leaflet 4-4-04 (WTA-certificate)	Fast drying including colour control High UV- and frost-resistance, resistant to ageing Crack bridging exhibiting a high flexibility Trowel- and spreadable consistency (e.g. wide brush), sprayable (spiral pump) Application without priming; can be painted and plastered over Siows carbonation and chloride-proof	Two-component, bitumen-free, green elastomer hybrid waterproofing for buildings Hygienic harmless, therefore able for the application in groundwater contact areas Fast drying and high stability for faster refilling of the pit Highly flexible Crack-bridging up to 2 mm Application by hand Solvent-free and eco-friendly Comparable to waterproofing materials after DIN 18195 Part 4, 5, 6 High UV-resistance and material compatibility
Applications:	System compatible levelling and sealing mortar according to WTA 4-6, e. g. for the formation of covings Sealing mortar according to DIN 18533 and the DBC guidlines PMBC, FPD and MDS In Combination with MC-Proof 101 HS suitable as waterproof mortar in case of back-bearing moisture penetration Suitable for partial and large-scale repair of concrete components in non-statically relevant areas Suitable for creation of levelling layers on concrete, bricks and natural stone masonry Suitable as joint mortar for natural stones, bricks and clinker Certified according to EN 1504 part 3 for principle 3 and 7, procedure 3.1, 3.3 and 7.1	Subsequent horizontal barrier for borehole method against capillary rising damp Suitable for all mineral building materials at interior and exterior areas Especially suitable for brickwork with high component thickness	Subsequent horizontal barrier against capillary rising damp, installed using the injection hole procedure for degrees of moisture penetration ≤ 95 % (without pressure)	Exterior sealing of structural components in contact to the ground Composite sealing with ceramic coatings, both interior and exterior Waterproofing of concrete, lightweight concrete, aerated concrete Waterproofing of masonry and render of categories CS II, CS III and CS IV	Subsequent structural sealing from the inside Waterproofing basis for Nafuflex bituminous thick coatings an damp substrates Waterproofing of damp and saline masonry Waterproofing of wall bases exposed to splash water (splash water zone)	Sealing injection in masonry and concrete in permanent water contact Subsequent sealing by horizontal barrier or vertical barrier against rising moisture in masonry Subsequent exterior sealing of ground-connected structural parts through laminar curtain injection Consolidation of non-cohesive soll with slight permeation REACH-assessed exposure scenarios: long-term water-contact, periodical Inhalation, application	Sealing of vertical, horizontal and inclined surfaces (basement walis, foundations, base plates) Refurbishment and reengineering of old waterproofing Sealing of prepend / movement joints at water resistant concrete Plinth sealing in splash water areas Installation of protection and drainage boards	For waterproofing of vertical, horizontal and inclined surfaces underneath protective layers Suitable for basements as splash water protection Suitable for retro-fitted waterproofing during repair measures New buildings and refurbishment of waterproofings (e.g. old polymer-modified bituminous thick coating, mineral surfaces)
Downloads:

Talk to a specialist ...

Filter products by:

Properties

Applications

Nafufill RM 10

Microsilica-modified sealing and leveling mortar

Emcephob HSL-W

Horizontal barrier against capillary rising damp (formerly OXAL HSL-W)

Emcephob HSC

Injection cream for the creation of horizontal barriers in masonry (formerly OXAL HSC)

MC-Proof 501 flex

Two-component flexible waterproofing grout

MC-Proof 101 HS

Sulphate-resistant Waterproofing Grout forthe repair of wet and salt-loaded masonry (formerly OXAL DS/HS)

MC-Injekt GL-95 TR

Soft Elastic Injection Resin

MC-Proof eco

Fast hardening, flexible and bituminous-free, economical two-component waterproofing (formerly Expert Proof eco)

MC-Proof one

The new green bitumen-free waterproofing of buildingsincorporating the EHS technlogy (formerly Expert Proof one)