Joint sealings

Construction joints are essential to the integrity of any building. Joint sealants from MC ensure that they are effectively sealed and protected against moisture and contaminant penetration.

There are products

Products to compare

	Mycoflex Resyst	Mycoflex 450 SP	MC-FLEX PU 22 Construct	Mycoflex Resyst Adhesive	Mycoflex 4100 TS	Mycoflex 4000 VE	Mycoflex 4000 SP	Mycoflex 488 MS	Mycoflex 450 VE	Mycoflex 251
Description:	Joints mouldings of Mycoflex Resyst system	Polyurethane-based joint sealant	One-component, moisture-curing sealant based on polyurethane	Duromer adhesive for joint mouldings of the Mycoflex-Resyst-Systems	Fast drying, special bonding coat for joint sealers on metallic and mineralic substrates	Chemical-resistant, polysulphide-based, selflevelling joint-sealer	Chemical-resistant, polysulphide-based, stable joint-sealer	Single-Component MS-Polymer Sealer in accordance with DIN 18450	Polyurethane-based joint sealant	One-component universal primer for joint sealants
Properties:	Closed cell polymer foam Highly resistant to chemicals Resistant to high temperatures	Two-component polyurethane Good chemical resistance (see table of resistances), especially against oils and fuels Total elastic deformation: 20 % stable, can be applied by spraying and spreading	Easy application Thixotropic Permanently elastic - total deformation 25% Cures with the humidity in the air Paintable Resistant to weather conditions and water No over joint expansion-bubble free curing	Ready-to-use two-component epoxy-based duromer resin Easy to apply manually from double-chamber cartdridges using the MC-Fastpack Power-Tool dispenser High degree of chemical resistance Thixotropic, stable, trowelable Good adhesion to dry to medium-damp mineral surfaces and dry, open pored polymer foams Fast strength development	Solvent-containing, two-component epoxy resin Low viscosity Fast curing and vaourisatio; short overworking times	Two-component polysulphide-rubber Highly resistant to chemicals (see table of resistances) Total elastic deformation: 15 % Sprayable, self-levelling in horizontal joints with a gradient of up to 2 %	Two-component polysulphide-rubber Highly resistant to chemicals (see table of resistances) Total elastic deformation: 25 % Sprayable, stable for rising structural parts	Singe-component Isocyanates-free and silicon-free Elastic Solvent-free, nearly odurless Very low emission according to GEV-EMICODE, categorie EC1^PLUSR Easy to spray and smooth Very high resistance to weathering and ageing In accordance with DIN 18450 (early resistance) Wide adhesion spectrum without primer (e.g. coated wood, various metals and plastics)	Two-component, polyurethane Good chemical resistance (see table of resistances), especially against oils and fuels Total elastic deformation: 20 % pourable, self-levelling	One-component universal primer based on polyurethane
Applications:	Joint sealings system in combination with Mycoflex Resyst Adhesive	Elastic sealing of joints in bridge constructions, civil engineering and hydraulic engineering Connecting- and movement-joints in sewage plants, sewers, oil sumps, etc. Floor joints in industrial buildings, workshops and multi-storey parking; elastic filling of pipe sockets	Horizontal and vertical joint sealing applications indoors and outdoors Joints in the sewage treatment plant	Adhesive for mouldings of the Mycoflex Resyst system for bonding mouldings to joint flanks and for bonding moulding transversal joints Formulated for adhesive bonding applications involving high demands on chemical resistance and small gap dimensions REACh-assessed exposure scenarios: Water contact periodic, inhalation periodic, application exposure	Primer on mineral based substrates for permanently elastic grouting of surfaces exposed chemicals and fuel Sealing of joints on and around gas stations Sealing of joints in driven-on areas Bonding of reative polymers to construction parts made of steel, steainless steel, galvanised steel, brass and copper	Elastic grouting of horizontal movement-joints with increased chemical impact due to liquid chemicals Sealing of concrete paving stones around petrol stations in accordance with KIWA-standard	Elastic grouting of vertical and overhanging movement-joints with increased chemical impact due to liquid chemicals Sealing of concrete paving stones around petrol stations in accordance with KIWA-standard Sealing of joints in driven-on areas	Joint sealing in accordance with DIN 18540 Movement- and connecting joints in structural engineering, precast industry, window manufacture, timber and metal structures with DIN EN 15651-1: 2012 Sealing of edge joints in floor surfaces an low mechanically loeaded joints with DIN EN 15651-4: 2012	Elastic sealing of joints in bridge constructions, civil engineering and hydraulic engineering Connecting- and movement-joints in sewage plants, sewers, oil sumps, etc. Floor joints in industrial buildings, workshops and multi-storey parking; elastic filling of pipe sockets	ready-to-use primer for joint sealing with Mycoflex products on absorbent substrates Bonding agent for polyurethane resin coatings
Downloads:

Talk to a specialist ...

Filter products by:

Properties

Applications

Mycoflex Resyst

Joints mouldings of Mycoflex Resyst system

Mycoflex 450 SP

Polyurethane-based joint sealant

MC-FLEX PU 22 Construct

One-component, moisture-curing sealant based on polyurethane

Mycoflex Resyst Adhesive

Duromer adhesive for joint mouldings of the Mycoflex-Resyst-Systems

Mycoflex 4100 TS

Fast drying, special bonding coat for joint sealers on metallic and mineralic substrates

Mycoflex 4000 VE

Chemical-resistant, polysulphide-based, selflevelling joint-sealer

Mycoflex 4000 SP

Chemical-resistant, polysulphide-based, stable joint-sealer

Mycoflex 488 MS

Single-Component MS-Polymer Sealer in accordance with DIN 18450

Mycoflex 450 VE

Polyurethane-based joint sealant

Mycoflex 251

One-component universal primer for joint sealants