Structural injection

There are products

Products to compare


Description:
Properties:
Applications:
Downloads:

Talk to a specialist ...

Centricrete UF

Two-component, rigid-filling cement slurry for the injection of cracks, voids and cavities in concrete and masonry

MC-Injekt GL-95

Swelling, flexible, waterproofing acrylate gel sealant for injection in concrete, masonry and foundation soil

MC-Injekt 3000 HPS

Swelling, flexible, waterproofing acrylate gel sealant for injection in concrete, masonry and foundation soil

MC-Injekt GL-95 TR

Swelling, flexible, waterproofing acrylate gel sealant for injection in concrete, masonry and foundation soil

MC-Injekt GL-95 TX

Swelling, flexible, waterproofing acrylate gel sealant for injection in concrete, masonry and foundation soil

MC-Injekt 1264 TF

Rigid bonding and sealing injection resin

MC-Injekt 1264 compact

Rigid bonding and sealing injection resin

MC-Injekt 2300 top

Ductile and flexible injection resin for the durable waterproofing of concrete, masonry and foundation soil

MC-Injekt 2300 flow

Ductile-elastic, permanently sealing, moisture-reactive injection resin for concrete, masonry and foundation soil

MC-Injekt 2700

Rigid sealing injection resin for concrete, masonry and foundation soil

MC-Injekt 2700 L

Rigid sealing injection resin for concrete, masonry and foundation soil

Centricrete HCS

Single-component, rigid-filling cement slurry for the injection of cracks, voids and cavities in concrete and masonry

MC-Adhesive PU solid

Universal adhesive for glueing building materials, bandaging and damming cracks, glueing packers

MC-Injekt 2133

Fast-foaming, one component injection resin for temporary sealing measures

MC-Injekt PowerSeal G

One-component, water-stopping and elastically sealing expansion resin for subsoil, concrete, masonry

MC-Injekt PowerSeal F

Highly elastic sealing, one-component injection resin for concrete, masonry and building ground

[{"id":"d5aa31bb86c438eb5b94961d5885f3c3","name":"Centricrete UF","short_description":"Two-component, rigid-filling cement slurry for the injection of cracks, voids and cavities in concrete and masonry","description":"Mineral suspension for injection, with particularly fine grain size, stable mixing. High spatial stability, high compressive and flexural strength. For non-positive filling injection of concrete, reinforced concrete or masonry, recommended from 0.4 mm crack width (tested from 0.25 mm). Particularly suitable for injecting cavities.\n","areas_of_applications":"<ul>\n<li>Rigid filling and reinforcement of cracks, construction joints, voids and cavities in concrete and masonry under dry, moist and water-bearing conditions<\/li>\n<\/ul>","properties":"<ul>\n<li>Low-viscosity fine-cement slurry (suspension) of good injectability<\/li>\n<li>Long working time<\/li>\n<li>Shrink- and expansion-free curing<\/li>\n<li>Realkalising effect<\/li>\n<li>Highly sulphate resistant according to the SVA process<\/li>\n<li>Environmental Product Declaration EPD<\/li>\n<\/ul>","categories":[{"key":"injection-systems","text":"Injection Systems"}],"groups":[{"key":"structural-injections","text":"Structural injection"}],"url":"injection-systems\/structural-injections\/centricrete-uf.html"},{"id":"fc11c86af62da69e8f9ef42726ba5755","name":"MC-Injekt GL-95","short_description":"Swelling, flexible, waterproofing acrylate gel sealant for injection in concrete, masonry and foundation soil","description":"Multi-component, particularly low-viscosity, aqueous injection resin based on acrylate, with variable reaction time up to approx. 90 s. The reaction product is swellable and highly elastic. For swellable waterproofing in permanently damp building components made of concrete or masonry. Suitable for injection into building ground.\n","areas_of_applications":"<ul>\n<li>Swelling flexible filling sealant for cracks and cavities in permanently damp concrete and masonry<\/li>\n<li>Subsequent vertical sealing of masonry<\/li>\n<li>Subsequent formation of a horizontal barrier\/DPC in masonry<\/li>\n<li>Injection of waterproofing membrane into interstitial spaces between buildings<\/li>\n<li>Injection of waterproofing membrane into foundation soil (curtain injection)<\/li>\n<\/ul>","properties":"<ul>\n<li>Very low-viscosity acrylic-based hydrogel<\/li>\n<li>Very good injectability<\/li>\n<li>Readily controllable injection path propagation thanks to controllable reaction time<\/li>\n<li>Very low application temperature<\/li>\n<li>Reliable sealing\/waterproofing due to high elasticity and good swelling capacity<\/li>\n<li>Durably water-impermeable in moist media<\/li>\n<li>General building authority approval issued by DIBt for injection into soil and groundwater<\/li>\n<li>Fulfils the UBA (German environmental agency) guidelines for sealants in contact with potable water<\/li>\n<li>High chemical resistance especially in highly alkaline environments<\/li>\n<li>REACH exposure: water contact permanent, inhalation periodic, processing and application<\/li>\n<li>Environmental Product Declaration EPD<\/li>\n<\/ul>","categories":[{"key":"injection-systems","text":"Injection Systems"},{"key":"injection-systems","text":"Injection Systems"}],"groups":[{"key":"structural-injections","text":"Structural injection"},{"key":"soil-stabilisation-slab-lifting","text":"Soil Stabilisation and Slab Lifting"}],"url":"injection-systems\/structural-injections\/mc-injekt-gl-95.html"},{"id":"31085966f18446e4aa34dc21e10e1131","name":"MC-Injekt 3000 HPS","short_description":"Swelling, flexible, waterproofing acrylate gel sealant for injection in concrete, masonry and foundation soil","description":"Multi-component, polymer-reinforced, low-viscosity, aqueous injection resin based on acrylate, with variable reaction time between 3:30 and 10 min, swellable and highly elastic, chemically resistant, particularly corrosion-resistant to steel.\nFor the swellable seal in permanently damp components made of concrete, reinforced concrete or masonry from 0.1 mm crack width.\nParticularly suitable for the injection of reinforced concrete and building ground.","areas_of_applications":"<ul>\n<li>Swelling flexible filling sealant for cracks, construction joints, expansion joints and cavities in permanently damp concrete and masonry<\/li>\n<li>Subsequent vertical sealing of masonry<\/li>\n<li>Subsequent formation of a horizontal barrier\/DPC in masonry<\/li>\n<li>Injection of waterproofing membrane into interstitial spaces between buildings<\/li>\n<li>Injection of waterproofing membrane into foundation soil (curtain injection)<\/li>\n<li>Injection of construction joints via injection tubes\/hoses<\/li>\n<\/ul>","properties":"<ul>\n<li>Low-viscosity acrylic-based hydrogel<\/li>\n<li>Very good injectability<\/li>\n<li>Readily controllable injection path propagation thanks to controllable reaction time<\/li>\n<li>Very low application temperature<\/li>\n<li>Reliable sealing\/waterproofing due to high elasticity and good swelling capacity<\/li>\n<li>Durably water-impermeable in moist media<\/li>\n<li>CE conformity according to EN 1504-5: CE U(S2) W(2\/3\/4) (1\/40)<\/li>\n<li>Corresponds to fire class B2 according to DIN 4102 in the injection medium<\/li>\n<li>General building authority approval issued by DIBt for injection into soil and groundwater<\/li>\n<li>Fulfils the UBA (German environmental agency) guidelines for sealants in contact with potable water<\/li>\n<li>High chemical resistance especially in highly alkaline environments<\/li>\n<li>REACH exposure: water contact permanent, inhalation periodic, processing and application<\/li>\n<li>Environmental Product Declaration EPD<\/li>\n<\/ul>","categories":[{"key":"injection-systems","text":"Injection Systems"}],"groups":[{"key":"structural-injections","text":"Structural injection"}],"url":"injection-systems\/structural-injections\/mc-injekt-3000-hps.html"},{"id":"e17513942e454919db0721a701e511cd","name":"MC-Injekt GL-95 TR","short_description":"Swelling, flexible, waterproofing acrylate gel sealant for injection in concrete, masonry and foundation soil","description":"Multi-component, low-viscosity, water-based injection resin based on acrylate, with variable reaction time up to approx. 10 min. The reaction product is swellable and highly elastic. For swellable sealing in permanently damp components made of concrete, reinforced concrete or masonry from 0.1 mm crack width. Suitable for the injection of building ground.\n","areas_of_applications":"<ul>\n<li>Swelling flexible filling sealant for cracks and cavities in permanently damp concrete and masonry<\/li>\n<li>Subsequent vertical sealing of masonry<\/li>\n<li>Subsequent formation of a horizontal barrier\/DPC in masonry<\/li>\n<li>Injection of waterproofing membrane into interstitial spaces between buildings<\/li>\n<li>Injection of waterproofing membrane into foundation soil (curtain injection)<\/li>\n<\/ul>","properties":"<ul>\n<li>Low-viscosity acrylic-based hydrogel<\/li>\n<li>Very good injectability<\/li>\n<li>Readily controllable injection path propagation thanks to controllable reaction time<\/li>\n<li>Very low application temperature<\/li>\n<li>Reliable sealing\/waterproofing due to high elasticity and good swelling capacity<\/li>\n<li>Durably water-impermeable in moist media<\/li>\n<li>Corresponds to fire class B2 according to DIN 4102 in the injection medium<\/li>\n<li>General building authority approval issued by DIBt for injection into soil and groundwater<\/li>\n<li>Fulfils the UBA (German environmental agency) guidelines for sealants in contact with potable water<\/li>\n<li>High chemical resistance especially in highly alkaline environments<\/li>\n<li>REACH exposure: water contact permanent, inhalation periodic, processing and application<\/li>\n<li>Environmental Product Declaration EPD<\/li>\n<\/ul>","categories":[{"key":"masonry-systems","text":"Masonry Systems"},{"key":"injection-systems","text":"Injection Systems"}],"groups":[{"key":"masonry-waterproofing","text":"Masonry waterproofing"},{"key":"structural-injections","text":"Structural injection"}],"url":"masonry-systems\/masonry-waterproofing\/mc-injekt-gl-95-tr.html"},{"id":"de6e9041b4b1c340bdf331c60ab770a8","name":"MC-Injekt GL-95 TX","short_description":"Swelling, flexible, waterproofing acrylate gel sealant for injection in concrete, masonry and foundation soil","description":"Multi-component, polymer-reinforced, particularly low-viscosity, water-based injection resin based on acrylate, with variable short reaction time. The reaction product is swellable, highly elastic, rich in solids, mechanically stable and for swellable sealing in permanently damp concrete or masonry components. Suitable for injecting joints in contact with the ground and building ground.","areas_of_applications":"<ul>\n<li>Swelling flexible filling sealant for cracks, construction joints, expansion joints and cavities in permanently damp concrete and masonry<\/li>\n<li>Subsequent vertical sealing of masonry<\/li>\n<li>Subsequent formation of a horizontal barrier\/DPC in masonry<\/li>\n<li>Injection of waterproofing membrane into interstitial spaces between buildings<\/li>\n<li>Injection of waterproofing membrane into foundation soil (curtain injection)<\/li>\n<li>Injection of construction joints via injection tubes\/hoses<\/li>\n<\/ul>","properties":"<ul>\n<li>Low-viscosity, high-solids acrylic-based hydrogel<\/li>\n<li>Very good injectability<\/li>\n<li>Readily controllable injection path propagation thanks to controllable reaction time<\/li>\n<li>Very low application temperature<\/li>\n<li>Reliable sealing\/waterproofing due to high elasticity and good swelling capacity<\/li>\n<li>Durably water-impermeable in moist media<\/li>\n<li>Corresponds to fire class B2 according to DIN 4102 in the injection medium<\/li>\n<li>Fulfils the UBA (German environmental agency) guidelines for sealants in contact with potable water<\/li>\n<li>Meets the KTW-BWGL guideline for seals in contact with drinking water<\/li>\n<li>High chemical resistance especially in highly alkaline environments<\/li>\n<li>CE conformity according to EN 1504-5: CE U(S2) W(2\/3\/4) (1\/40)<\/li>\n<li>REACH exposure: water contact permanent, inhalation periodic, processing and application<\/li>\n<li>Environmental Product Declaration EPD<\/li>\n<\/ul>","categories":[{"key":"injection-systems","text":"Injection Systems"}],"groups":[{"key":"structural-injections","text":"Structural injection"}],"url":"injection-systems\/structural-injections\/mc-injekt-gl-95-tx.html"},{"id":"24184726afa88ba4ae980d030a94c492","name":"MC-Injekt 1264 TF","short_description":"Rigid bonding and sealing injection resin","description":"Two-component epoxy resin for non-positive bonding and sealing injections of cracks, joints and cavities with small widths in building construction, civil engineering and civil engineering as well as for grouting injection hoses. MC-Injekt 1264 TF is highly penetration-active, has a fast strength development and can be used under dry conditions from 0.1 mm crack width.","areas_of_applications":"<ul>\n<li>Rigid filling by injection or impregnation of cracks, joints and limited cavities civil and structural engineering works under dry conditions<\/li>\n<li>Grouting with injection tubes and hoses<\/li>\n<\/ul>","properties":"<ul>\n<li>Low-viscosity epoxy-based duromer resin<\/li>\n<li>Very good injectability due to very low viscosity<\/li>\n<li>Penetration activity due to low surface tension<\/li>\n<li>Low application temperature<\/li>\n<li>Rapid strength development<\/li>\n<li>Curing under dynamic loading<\/li>\n<li>High compressive and tensile strength<\/li>\n<li>General building authority approval issued by the DIBt for substances resistant to chemical attack in LAU facilities (facilities for the storage, filling and handling of liquid substances hazardous to water)<\/li>\n<li>REACH exposure: inhalation periodic, processing and application<\/li>\n<li>Environmental product declaration EPD<\/li>\n<\/ul>","categories":[{"key":"injection-systems","text":"Injection Systems"}],"groups":[{"key":"structural-injections","text":"Structural injection"}],"url":"injection-systems\/structural-injections\/mc-injekt-1264-tf.html"},{"id":"65cc00356ecdefe052d490e5f2b7a05f","name":"MC-Injekt 1264 compact","short_description":"Rigid bonding and sealing injection resin","description":"Two-component epoxy resin for positively connecting and sealing injections and impregnation of cracks, joints and cavities in building construction, civil engineering and engineering as well as for pressing injection hoses. MC-Injekt 1264 compact is highly penetrative, has a rapid development of strength and can be used under dry and wet-moist conditions.","areas_of_applications":"<ul>\n<li>Rigid filling by injection or impregnation of cracks, joints and limited cavities civil and structural engineering works under dry and moisture-laden conditions<\/li>\n<li>Injection work in accordance with EN 1504-5 and German codes DAfStb (repair guidelines) and ZTV-ING (contract guidelines for civil engineering works)<\/li>\n<li>Reinforcement and waterproofing of underground infrastructure made of concrete and masonry (manhole and shaft structures, sewer structures)<\/li>\n<li>Grouting with injection tubes and hoses<\/li>\n<\/ul>","properties":"<ul>\n<li>Low-viscosity epoxy-based duromer resin<\/li>\n<li>Good injectability<\/li>\n<li>High penetration activity due to low surface tension<\/li>\n<li>Optimum moisture tolerance<\/li>\n<li>Rapid strength development<\/li>\n<li>Complete curing under dynamic loading<\/li>\n<li>High compressive and tensile strength<\/li>\n<li>Liquid-tight<\/li>\n<li>Chemically resistant<\/li>\n<li>REACH exposure: Inhalation periodic, processing and application<\/li>\n<li>Environmental Product Declaration EPD<\/li>\n<\/ul>","categories":[{"key":"injection-systems","text":"Injection Systems"}],"groups":[{"key":"structural-injections","text":"Structural injection"}],"url":"injection-systems\/structural-injections\/mc-injekt-1264-compact.html"},{"id":"14ff9fa27b1dc8f154cb7b487b9d108b","name":"MC-Injekt 2300 top","short_description":"Ductile and flexible injection resin for the durable waterproofing of concrete, masonry and foundation soil","description":"Two-component, particularly low-viscosity injection resins based on polyurethane, with a variable reaction time that can be set between 4 and 100 min by mixing MC-Injekt 2300 top and MC-Injekt 2300 rapid; highly elastic, flexible at low temperatures, with closed, permanently dense pore structure, sustainable environmentally friendly.\nFor the elastic sealing injection of concrete, reinforced concrete or masonry, subsoil from 0.1 mm crack width.\nParticularly suitable for injection in drinking water structures and building ground.","areas_of_applications":"<ul>\n<li>Ductile, flexible filler and sealant of cracks, construction joints and cavities in concrete and masonry under dry, water-bearing and pressurised water-bearing conditions<\/li>\n<li>Injection work in accordance with EN 1504-5, DAfStb (repair guidelines), ZTV-ING (contract guidelines for civil engineering works)<\/li>\n<li>Grouting of injection tubes and hoses<\/li>\n<li>Waterproofing of hydraulic structures<\/li>\n<li>Waterproofing of masonry against moisture penetration and rising damp<\/li>\n<li>Waterproofing of pipe and liner connections to manhole\/shaft structures of sewerage infrastructure<\/li>\n<li>Sealing injection of manhole ring joints, pipe penetrations, socket joints<\/li>\n<\/ul>","properties":"<ul>\n<li>Particularly low-viscosity polyurethane-based elastomer resin<\/li>\n<li>Very good injectability<\/li>\n<li>High penetration activity due to low surface tension<\/li>\n<li>Water-displacing, no foam formation<\/li>\n<li>Variable control of reaction times<\/li>\n<li>Complete curing under dynamic loading<\/li>\n<li>High elasticity<\/li>\n<li>Corresponds to fire class B2 according to DIN 4102 in the injection medium<\/li>\n<li>Durable water impermeability<\/li>\n<li>CE conformity according to EN 1504-5: CE U(D2) W(1) (1\/2\/3\/4) (5\/40)<\/li>\n<li>General building authority approval issued by the DIBt for substances resistant to chemical attack in LAU facilities (facilities for the storage, filling and handling of liquid substances hazardous to water)<\/li>\n<li>General building authority approval issued by the DIBt for injection into soil and groundwater<\/li>\n<li>REACH exposure: water contact permanent, inhalation periodic, processing and application<\/li>\n<li>Environmental Product Declaration EPD<\/li>\n<\/ul>","categories":[{"key":"injection-systems","text":"Injection Systems"}],"groups":[{"key":"structural-injections","text":"Structural injection"}],"url":"injection-systems\/structural-injections\/mc-injekt-2300-top.html"},{"id":"315b14d1c4ea6fee426516760aa02f31","name":"MC-Injekt 2300 flow","short_description":"Ductile-elastic, permanently sealing, moisture-reactive injection resin for concrete, masonry and foundation soil","description":"Two-component, low-viscosity polyurethane-based injection resin with very long workability and fast reaction on contact with water in the component. Highly elastic and particularly highly deformable thanks to a pore-rich, permanently dense resin structure. For the sealing injection of concrete, reinforced concrete or masonry from 0.2 mm crack width. Can be injected against water without pre-injection of polyurethane foam. Suitable for injection into building ground and groundwater.","areas_of_applications":"<ul>\n<li>Ductile, flexible filler and sealant of cracks, construction joints and cavities in concrete and masonry under dry, water-bearing and pressurised water-bearing conditions<\/li>\n<li>Grouting of injection tubes and hoses<\/li>\n<li>Waterproofing of hydraulic structures<\/li>\n<li>Waterproofing of masonry against moisture penetration and rising damp<\/li>\n<li>Waterproofing of pipe and liner connections to manhole\/shaft structures of sewerage infrastructure<\/li>\n<li>Sealing injection of manhole ring joints, pipe penetrations, socket joints<\/li>\n<\/ul>","properties":"<ul>\n<li>Low-viscosity polyurethane-based elastomer resin<\/li>\n<li>Very good injectability<\/li>\n<li>Extra-long application time<\/li>\n<li>Strongly reactive acceleration with water \u2013 Water Boost Technology<\/li>\n<li>Expansive increase in volume with self-injection effect on contact with water<\/li>\n<li>Increase in reactivity with MC-KAT 22<\/li>\n<li>Creation of a water-stopping foam from component B with MC-KAT 22<\/li>\n<li>Permanently elastic sealing<\/li>\n<li>High elasticity<\/li>\n<li>Durable water impermeability<\/li>\n<li>CE conformity according to EN 1504-5: CE U(D1) W(1) (1\/2\/3\/4) (5\/40)<\/li>\n<li>REACH exposure: water contact permanent, inhalation periodic, processing and application<\/li>\n<li>EPD environmental product declaration<\/li>\n<\/ul>","categories":[{"key":"injection-systems","text":"Injection Systems"}],"groups":[{"key":"structural-injections","text":"Structural injection"}],"url":"injection-systems\/structural-injections\/mc-injekt-2300-flow.html"},{"id":"2cb3966be0479c0f897941a55731d137","name":"MC-Injekt 2700","short_description":"Rigid sealing injection resin for concrete, masonry and foundation soil","description":"Two-component, low-viscosity polyurethane-based injection resin. Very short reaction time of approx. 30 s. When cured in a dry environment, the reacted resin is viscoplastic with high strength. MC-Injekt 2700 reacts with water to form a rigid foam and achieves an up to 10-fold increase in volume with unhindered expansion. For the force-fit sealing injection of concrete, reinforced concrete or masonry, subsoil from 0.2 mm crack width. Suitable for injection into subsoil and groundwater.","areas_of_applications":"<ul>\n<li>Sealing and reinforcing of cracked and void-rich structures made of concrete, masonry and natural stone in building construction, civil engineering, hydraulic engineering and general civil engineering<\/li>\n<li>Sealing of construction pit enclosures<\/li>\n<li>Consolidation of foundation soil in special foundation engineering<\/li>\n<li>Increasing the load-bearing capacity of the building site under floor slabs and foundations<\/li>\n<li>Sealing of rigid joints in buildings<\/li>\n<\/ul>","properties":"<ul>\n<li>Low-viscosity polyurethane-based duromer resin<\/li>\n<li>Good injectability<\/li>\n<li>Variable control of reactivity<\/li>\n<li>Water-displacing<\/li>\n<li>Limited foaming on contact with water (hard foam)<\/li>\n<li>Durable water impermeability<\/li>\n<li>High compressive and tensile strength<\/li>\n<li>Corresponds to fire class B2 according to DIN 4102 in the injection medium<\/li>\n<li>REACH exposure: water contact permanent, inhalation periodic, processing and application<\/li>\n<li>Environmental Product Declaration EPD<\/li>\n<\/ul>","categories":[{"key":"injection-systems","text":"Injection Systems"},{"key":"injection-systems","text":"Injection Systems"}],"groups":[{"key":"structural-injections","text":"Structural injection"},{"key":"soil-stabilisation-slab-lifting","text":"Soil Stabilisation and Slab Lifting"}],"url":"injection-systems\/structural-injections\/mc-injekt-2700.html"},{"id":"da5025c6273846b491338a355e43577e","name":"MC-Injekt 2700 L","short_description":"Rigid sealing injection resin for concrete, masonry and foundation soil","description":"Two-component, low-viscosity injection resin based on polyurethane. Reaction time approx. 100 min. When cured in a dry environment, the reacted resin is viscoplastic with high strength. It reacts with water to form a rigid foam and achieves an up to 10-fold increase in volume with unhindered expansion. For the force-fit sealing injection of concrete, reinforced concrete or masonry, building ground from 0.2 mm crack width. Suitable for the injection of subsoil.","areas_of_applications":"<ul>\n<li>Sealing and reinforcing of cracked and void-rich structures made of concrete, masonry and natural stone in building construction, civil engineering, hydraulic engineering and general civil engineering<\/li>\n<li>Sealing of construction pit enclosures<\/li>\n<li>Consolidation of foundation soil in special foundation engineering<\/li>\n<li>Increasing the load-bearing capacity of the building site under floor slabs and foundations<\/li>\n<li>Sealing of rigid joints in buildings<\/li>\n<\/ul>","properties":"<ul>\n<li>Low-viscosity polyurethane-based duromer resin<\/li>\n<li>Good injectability<\/li>\n<li>Variable control of reactivity<\/li>\n<li>Water-displacing<\/li>\n<li>Limited foaming on contact with water (hard foam)<\/li>\n<li>Durable water impermeability<\/li>\n<li>High compressive and tensile strength<\/li>\n<li>Corresponds to fire class B2 according to DIN 4102 in the injection medium<\/li>\n<li>REACH exposure: water contact permanent, inhalation periodic, processing and application<\/li>\n<li>Environmental Product Declaration EPD<\/li>\n<\/ul>","categories":[{"key":"injection-systems","text":"Injection Systems"},{"key":"injection-systems","text":"Injection Systems"}],"groups":[{"key":"soil-stabilisation-slab-lifting","text":"Soil Stabilisation and Slab Lifting"},{"key":"structural-injections","text":"Structural injection"}],"url":"injection-systems\/soil-stabilisation-slab-lifting\/mc-injekt-2700-l.html"},{"id":"d197d50794fbd288ffd7ad5a3afd4f38","name":"Centricrete HCS","short_description":"Single-component, rigid-filling cement slurry for the injection of cracks, voids and cavities in concrete and masonry","description":"Mineral suspension for injection, with a fine grading curve, stable mixing, with variable addition of water, high dimensional stability, very high compressive and flexural strength.\nFor the non-positive, filling injection of concrete, reinforced concrete or masonry, from a crack width of 0.8 mm.\nParticularly suitable for the injection of cavities in high-strength components.","areas_of_applications":"<ul>\n<li>Rigid filling and reinforcement of cracks, construction joints, voids and cavities in concrete and masonry under dry, moist and water-bearing conditions<\/li>\n<li>Pre-injection of larger cavities in concrete and masonry prior to a partial or full-surface sealing injection\/waterproofing measures<\/li>\n<\/ul>","properties":"<ul>\n<li>Fine-cement slurry (suspension) of good injectability<\/li>\n<li>Long working time<\/li>\n<li>Rapid strength development<\/li>\n<li>Shrink- and expansion-free curing<\/li>\n<li>Realkalising effect<\/li>\n<li>Chloride-free<\/li>\n<li>Environmental Product Declaration EPD<\/li>\n<\/ul>","categories":[{"key":"injection-systems","text":"Injection Systems"}],"groups":[{"key":"structural-injections","text":"Structural injection"}],"url":"injection-systems\/structural-injections\/centricrete-hcs.html"},{"id":"e86772d5682d6823c4d57080bad6533c","name":"MC-Adhesive PU solid","short_description":"Universal adhesive for glueing building materials, bandaging and damming cracks, glueing packers","description":"Trowelable, stable, two-component universal adhesive based on polyurethane resin. Can be used for bonding mineral and metallic building materials, for taping and damming cracks and for bonding packers during injection work.","areas_of_applications":"<ul>\n<li>Glueing mineral and metallic building materials as well as various plastics<\/li>\n<li>Bandaging of cracks<\/li>\n<li>Glueing adhesive packers for injection work<\/li>\n<li>Sealing cracks and open cavities<\/li>\n<\/ul>","properties":"<ul>\n<li>High viscosity 2-component polyurethane-based adhesive<\/li>\n<li>Mixes very well<\/li>\n<li>Tough-elastic<\/li>\n<li>Can be trowelled<\/li>\n<li>Thixotropic, stable<\/li>\n<li>Adheres well to mineral and metallic surfaces<\/li>\n<li>REACH exposure: water contact permanent, inhalation periodic, processing and application<\/li>\n<li>Environmental Product Declaration EPD<\/li>\n<\/ul>","categories":[{"key":"injection-systems","text":"Injection Systems"}],"groups":[{"key":"structural-injections","text":"Structural injection"}],"url":"injection-systems\/structural-injections\/mc-adhesive-pu-solid.html"},{"id":"8e68b9d40b50ba23207f6b31c5a84894","name":"MC-Injekt 2133","short_description":"Fast-foaming, one component injection resin for temporary sealing measures","description":"Single-component injection resin with unlimited working time and immediate strong foaming on contact with water. For stopping strongly flowing water in components made of concrete, reinforced concrete, masonry and building ground as well as for the temporary sealing of water-bearing cracks before permanent sealing injection with MC-Injekt 2300 top.","areas_of_applications":"<ul>\n<li>Stopping strongly flowing water in structures, subsoil or building pits<\/li>\n<li>Temporary sealing of heavily water-bearing cracks before permanent sealing injection with MC elastomer resins MC-Injekt 2300 top or MC-Injekt 2300 flow<\/li>\n<\/ul>","properties":"<ul>\n<li>Low-viscosity polyurethane-based elastomer foam resin<\/li>\n<li>Unlimited processing time without contact with water<\/li>\n<li>Fast reaction on contact with water<\/li>\n<li>High volume increase within a few seconds<\/li>\n<li>Stops pressurised water<\/li>\n<li>Phthalate plasticiser-free<\/li>\n<li>REACH exposure: water contact permanent, inhalation periodic, processing and application<\/li>\n<li>Environmental Product Declaration EPD<\/li>\n<\/ul>","categories":[{"key":"injection-systems","text":"Injection Systems"}],"groups":[{"key":"structural-injections","text":"Structural injection"}],"url":"injection-systems\/structural-injections\/mc-injekt-2133.html"},{"id":"601cee90c5f86ba95cf0a8dc19997ecd","name":"MC-Injekt PowerSeal G","short_description":"One-component, water-stopping and elastically sealing expansion resin for subsoil, concrete, masonry","description":"Single-component, fast-reacting polyurethane-based injection resin with strong expansion, whereby closed-cell, water-impermeable pores are formed. Cracks and room joints can be sealed flexibly and permanently elastically with a single injection. Phthalate-free formulation. Recommended for injecting concrete, masonry, reinforced concrete or building ground from approx. 0.5 mm (tested from 0.3 mm crack width in concrete). Suitable for the injection of concrete, masonry, reinforced concrete or foundation soil.","areas_of_applications":"<ul>\n<li>Highly elastic sealing injection of cracks, joints and cavities in permanently damp concrete and masonry structures, optimal from a crack width of >0.3 mm.<\/li>\n<li>Water-stopping and permanently sealing injection against flowing and pressing water<\/li>\n<li>Sealing of rock, subsoil, excavations and structures in tunnelling and foundation engineering\u00a0<\/li>\n<li>Sealing of interstices and joints over a wide area<\/li>\n<li>Sealing of masonry by injection\u00a0<\/li>\n<li>Sealing of shaft structures and canals<\/li>\n<\/ul>","properties":"<ul>\n<li>One-component, water-reactive polyurethane-based injection resin<\/li>\n<li>Good injectability<\/li>\n<li>Unlimited working time<\/li>\n<li>Strong volume increase on contact with water<\/li>\n<li>Self-injection effect - Water Boost Technology<\/li>\n<li>Immediate and permanent waterproofing success<\/li>\n<li>Highly elastic with dense pore structure<\/li>\n<li>CE conformity according to EN 1504-5: U (D1) W (3) (2\/3\/4) (5\/40)<\/li>\n<li>Groundwater-hygienically harmless according to general building authority approval for injection into soil and groundwater<\/li>\n<li>REACH exposure: Water contact permanent, inhalation periodic, processing<\/li>\n<\/ul>","categories":[{"key":"injection-systems","text":"Injection Systems"}],"groups":[{"key":"structural-injections","text":"Structural injection"}],"url":"injection-systems\/structural-injections\/mc-injekt-powerseal-g.html"},{"id":"d779dc3bb22dbd6989ab8fc7229b7d15","name":"MC-Injekt PowerSeal F","short_description":"Highly elastic sealing, one-component injection resin for concrete, masonry and building ground","description":"","areas_of_applications":"<ul>\n<li>Highly elastic sealing injection of cracks and gaps from approx. 0.3 to approx. 5 mm in concrete and brickwork\u00a0<\/li>\n<li>Water-stopping and permanently sealing injection against flowing and pressing water<\/li>\n<li>Sealing of rock, subsoil, excavation pits and structures in tunneling and special foundation engineering\u00a0<\/li>\n<li>Sealing of interstices and joints of up to approx. 5 mm in thickness<\/li>\n<li>Sealing of masonry with injection<\/li>\n<li>Sealing of shaft structures and canals with injection<\/li>\n<\/ul>","properties":"<ul>\n<li>One-component water-reactive polyurethane-based injection resin<\/li>\n<li>Good injectability into water-filled cracks\u00a0<\/li>\n<li>Unlimited working time\u00a0<\/li>\n<li>Strong volume increase on contact with water<\/li>\n<li>Self-injection effect through Water Boost Technology<\/li>\n<li>Immediate and permanent waterproofing success<\/li>\n<li>Highly elastic with close pore structure<\/li>\n<li>Conforms to fire class B2 according to DIN 4102 in the injection medium<\/li>\n<li>CE conformity according to EN 1504-5: U (D1) W (3) (2\/3\/4) (5\/40)<\/li>\n<li>Groundwater-hygienically harmless for injection into soil and groundwater<\/li>\n<li>REACH exposure: water contact permanent, inhalation periodic, processing<\/li>\n<\/ul>","categories":[{"key":"injection-systems","text":"Injection Systems"}],"groups":[{"key":"structural-injections","text":"Structural injection"}],"url":"injection-systems\/structural-injections\/mc-injekt-powerseal-f.html"}] {"d197d50794fbd288ffd7ad5a3afd4f38":[{"id":"ee1efcd0f89a65cc39bd6bbb2f2cf58c","name":"Centricrete HCS","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/Centricrete_HCS_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"},{"id":"582318629eb38f77e6f294c0ad7c7d0c","name":"Centricrete HCS","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/Centricrete_HCS_GB_EN_SDS.pdf","type":"sds","typeText":"Safety Datasheets"}],"4bb21a827cd131cf64656076524cb4ed":[{"id":"ee1efcd0f89a65cc39bd6bbb2f2cf58c","name":"Centricrete HCS","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/Centricrete_HCS_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"},{"id":"582318629eb38f77e6f294c0ad7c7d0c","name":"Centricrete HCS","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/Centricrete_HCS_GB_EN_SDS.pdf","type":"sds","typeText":"Safety Datasheets"}],"d5aa31bb86c438eb5b94961d5885f3c3":[{"id":"d748250b341e346017eed01bada9ba97","name":"Centricrete UF","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/Centricrete_UF_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"},{"id":"4436c96ec101bc70fc3e07c6df302614","name":"Centricrete UF Powder","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/Centricrete_UF_Powder_GB_EN_SDS.pdf","type":"sds","typeText":"Safety Datasheets"},{"id":"8760e4d91042c10b9a1e815229fa5aff","name":"Centricrete UF Suspension","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/Centricrete_UF_Suspension_GB_EN_SDS.pdf","type":"sds","typeText":"Safety Datasheets"}],"fb734af4885363c15531ab992f9ebe6c":[{"id":"d748250b341e346017eed01bada9ba97","name":"Centricrete UF","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/Centricrete_UF_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"},{"id":"4436c96ec101bc70fc3e07c6df302614","name":"Centricrete UF Powder","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/Centricrete_UF_Powder_GB_EN_SDS.pdf","type":"sds","typeText":"Safety Datasheets"},{"id":"8760e4d91042c10b9a1e815229fa5aff","name":"Centricrete UF Suspension","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/Centricrete_UF_Suspension_GB_EN_SDS.pdf","type":"sds","typeText":"Safety Datasheets"}],"e86772d5682d6823c4d57080bad6533c":[{"id":"b109a395959ae7cad752586f7255cd6d","name":"MC-Adhesive PU solid","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Adhesive_PU_solid_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"},{"id":"68111ff3641c34b3b7448ab92698f61d","name":"MC-Adhesive PU solid - Komponente A","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Adhesive_PU_solid_-_Komponente_A_GB_EN_SDS.pdf","type":"sds","typeText":"Safety Datasheets"}],"08c3e31c22fcadecdf3e5aabbb6d16d1":[{"id":"b109a395959ae7cad752586f7255cd6d","name":"MC-Adhesive PU solid","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Adhesive_PU_solid_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"},{"id":"68111ff3641c34b3b7448ab92698f61d","name":"MC-Adhesive PU solid - Komponente A","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Adhesive_PU_solid_-_Komponente_A_GB_EN_SDS.pdf","type":"sds","typeText":"Safety Datasheets"}],"65cc00356ecdefe052d490e5f2b7a05f":[{"id":"17391d382234c01ed0f2ce0f50a13481","name":"MC-Injekt 1264 compact","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Injekt_1264_compact_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"}],"95a876860cb4a4715d502183214a06c5":[{"id":"17391d382234c01ed0f2ce0f50a13481","name":"MC-Injekt 1264 compact","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Injekt_1264_compact_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"}],"24184726afa88ba4ae980d030a94c492":[{"id":"1c5bf9fcbed79044754ecda710dc79cd","name":"MC-Injekt 1264 TF","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Injekt_1264_TF_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"}],"d657506d564f1fd98e9a52d34216fe26":[{"id":"1c5bf9fcbed79044754ecda710dc79cd","name":"MC-Injekt 1264 TF","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Injekt_1264_TF_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"}],"8e68b9d40b50ba23207f6b31c5a84894":[{"id":"64f1bffcc43a4bb13502d93b1c4525e1","name":"MC-Injekt 2133","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Injekt_2133_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"}],"ffea3f8e7ab57928d42466f44b145f23":[{"id":"64f1bffcc43a4bb13502d93b1c4525e1","name":"MC-Injekt 2133","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Injekt_2133_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"}],"315b14d1c4ea6fee426516760aa02f31":[{"id":"6ecac7c6885c9c58bdff97ceaeee0dfe","name":"MC-Injekt 2300 flow","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Injekt_2300_flow_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"}],"7bd07e6283c4f0fedf1ac756cd9688f2":[{"id":"6ecac7c6885c9c58bdff97ceaeee0dfe","name":"MC-Injekt 2300 flow","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Injekt_2300_flow_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"}],"14ff9fa27b1dc8f154cb7b487b9d108b":[{"id":"7d37957f90b2f81f87fee96fe6ad80cb","name":"MC-Injekt 2300 top","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Injekt_2300_top_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"}],"cfabc11fc8fa608009a8ef010dc0ff77":[{"id":"7d37957f90b2f81f87fee96fe6ad80cb","name":"MC-Injekt 2300 top","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Injekt_2300_top_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"}],"2cb3966be0479c0f897941a55731d137":[{"id":"4e89aab46996943317f0563d6577af6c","name":"MC-Injekt 2700","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Injekt_2700_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"}],"e91c8e2440ae1d6fe9102bb022ed3c58":[{"id":"4e89aab46996943317f0563d6577af6c","name":"MC-Injekt 2700","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Injekt_2700_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"}],"da5025c6273846b491338a355e43577e":[{"id":"5786a97608afc30092131c4a9f1285f6","name":"MC-Injekt 2700 L","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Injekt_2700_L_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"}],"e2ca5fb0415aef3d3fcd3ea52b8b1fd8":[{"id":"5786a97608afc30092131c4a9f1285f6","name":"MC-Injekt 2700 L","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Injekt_2700_L_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"}],"31085966f18446e4aa34dc21e10e1131":[{"id":"9b7647bfcb6bdd36c935b8a351cfe380","name":"MC-Injekt 3000 HPS","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Injekt_3000_HPS_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"}],"c1fbdbea8987173389c10c91fb578a54":[{"id":"9b7647bfcb6bdd36c935b8a351cfe380","name":"MC-Injekt 3000 HPS","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Injekt_3000_HPS_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"}],"fc11c86af62da69e8f9ef42726ba5755":[{"id":"056e057b4209fa547c880f5cbf982d0e","name":"MC-Injekt GL-95","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Injekt_GL-95_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"}],"344ca645f7970f430e5792ccf767495c":[{"id":"056e057b4209fa547c880f5cbf982d0e","name":"MC-Injekt GL-95","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Injekt_GL-95_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"}],"e17513942e454919db0721a701e511cd":[{"id":"8301426bf23520417453f432e7435d1e","name":"MC-Injekt GL-95 TR","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Injekt_GL-95_TR_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"}],"934b962a12b56b5824a44ef0809291e6":[{"id":"8301426bf23520417453f432e7435d1e","name":"MC-Injekt GL-95 TR","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Injekt_GL-95_TR_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"}],"de6e9041b4b1c340bdf331c60ab770a8":[{"id":"8e16b5e41c6cfcec57a54312ae89a350","name":"MC-Injekt GL-95 TX","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Injekt_GL-95_TX_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"}],"99ba5729068de3a8c37411e377539727":[{"id":"8e16b5e41c6cfcec57a54312ae89a350","name":"MC-Injekt GL-95 TX","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Injekt_GL-95_TX_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"}],"d779dc3bb22dbd6989ab8fc7229b7d15":[{"id":"5292ec6709ee1c368175812826502fd7","name":"MC-Injekt PowerSeal F","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Injekt_PowerSeal_F_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"}],"82083e35d14b1642de43a5007cd5cf65":[{"id":"5292ec6709ee1c368175812826502fd7","name":"MC-Injekt PowerSeal F","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Injekt_PowerSeal_F_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"}],"601cee90c5f86ba95cf0a8dc19997ecd":[{"id":"85983b1f8972dde7b0dbfa191635d3ba","name":"MC-Injekt PowerSeal G","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Injekt_PowerSeal_G_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"}],"b96be7d42cce0b809381e7394821c81c":[{"id":"85983b1f8972dde7b0dbfa191635d3ba","name":"MC-Injekt PowerSeal G","url":"https:\/\/pim.mc-bauchemie.de\/media\/MCBAUCHEMIEData\/DO\/base\/MC-Injekt_PowerSeal_G_DE_DE_EN_TDS.pdf","type":"tds","typeText":"Technical Datasheet"}]}