MC-Fastpack System

There are products

Products to compare


Description:
Properties:
Applications:
Downloads:

Talk to a specialist ...

MC-AnchorSolid E820

Highly reactive anchor adhesive for bonded anchors in non-cracked concrete

MC-Fastpack 1264 compact

Rigid bonding and sealing injection resin

MC-Fastpack 2300 top

Ductile and flexible injection resin for the durable waterproofing of concrete and masonry

MC-Fastpack 2700

Rigid sealing injection resin for concrete and masonry

MC-Fastpack Injekt LE

Expansion resin for waterproofing and increasing the load-bearing capacity of buildings and consolidating the building site

MC-Fastpack PR solid

Highly reactive universal adhesive for concrete, masonry and steel

[{"id":"c93d7be2bf0a065044832513d4a2a82e","name":"MC-AnchorSolid E820","short_description":"Highly reactive anchor adhesive for bonded anchors in non-cracked concrete","description":"Highly reactive anchor adhesive for bonded anchors in non-cracked concrete. For gluing dowels, anchors, threaded rods and rebar. Also suitable for bonding concrete and masonry.","areas_of_applications":"<ul>\n<li>Anchoring work for static and quasi-steady loads in horizontal, vertical and overhead areas<\/li>\n<li>Approved system for use in uncracked concrete from C20\/25 to C50\/60<\/li>\n<li>Anchoring for dry and permanent wet interior and exterior components, with and without especially aggressive conditions<\/li>\n<li>Anchoring of threaded rods and rebars for fixings of attachements e.g. consoles, railings, storage racks, awnings, scaffolding, suspended ceiling, building technology, etc.<\/li>\n<li>Approved as bonded anchor according to European Technical Assessment (ETA-15\/0506)<\/li>\n<li>Manual application with the MC-Fastpack Power-Tool<\/li>\n<\/ul>","properties":"<ul>\n<li>Ready to use 2-component epoxy-based anchor adhesive<\/li>\n<li>Suitable for dry and wet non-cracked concrete<\/li>\n<li>Applicable with threaded rods and rebars<\/li>\n<li>Rapid strength development for early initial loading<\/li>\n<li>High compressive and tensile strength<\/li>\n<li>Thixotropic and stable for vertical and overhead application<\/li>\n<li>Very low application temperature<\/li>\n<li>REACH exposure: water contact permanent, inhalation periodic, processing and application<\/li>\n<li>Environmental Product Declaration EPD<\/li>\n<\/ul>","categories":[{"key":"injection-systems","text":"Injection Systems"}],"groups":[{"key":"mc-fastpack-system","text":"MC-Fastpack System"}],"url":"injection-systems\/mc-fastpack-system\/mc-anchorsolid-e820.html"},{"id":"ca915b545b93cd79acbac81dfab51e7e","name":"MC-Fastpack 1264 compact","short_description":"Rigid bonding and sealing injection resin","description":"Two-component epoxy resin for force-fit connecting and sealing injections for closing cracks from 0.3 mm, joints and cavities with small widths in building construction, civil engineering and civil engineering. MC-Injekt 1264 compact is highly penetration-active, has a rapid strength development and can be used under dry and wet conditions. MC-Fastpack 1264 compact is applied from double-chamber cartridges using the MC-Fastpack Power-Tool.","areas_of_applications":"<ul>\n<li>Rigid filling by injection or impregnation of cracks, joints and limited cavities in civil and structural engineering works under dry and moisture-laden conditions<\/li>\n<li>Injection work in accordance with EN 1504-5 and German codes DAfStb (repair guidelines) and ZTV-ING (contract guidelines for civil engineering works)<\/li>\n<li>Reinforcement and waterproofing of underground infrastructure made of concrete and masonry (manhole and shaft structures, sewer structures)<\/li>\n<li>Manual application with the MC-Fastpack Power-Tool<\/li>\n<\/ul>","properties":"<ul>\n<li>Low-viscosity epoxy-based duromer resin<\/li>\n<li>Good injectability<\/li>\n<li>High penetration activity due to low surface tension<\/li>\n<li>Optimum moisture tolerance<\/li>\n<li>Rapid strength development<\/li>\n<li>Complete curing under dynamic loading<\/li>\n<li>High compressive and tensile strength<\/li>\n<li>Liquid-tight<\/li>\n<li>Chemically resistant<\/li>\n<li>REACH exposure: Inhalation periodic, processing and application<\/li>\n<li>Environmental Product Declaration EPD<\/li>\n<\/ul>","categories":[{"key":"injection-systems","text":"Injection Systems"}],"groups":[{"key":"mc-fastpack-system","text":"MC-Fastpack System"}],"url":"injection-systems\/mc-fastpack-system\/mc-fastpack-1264-compact.html"},{"id":"cda21967108bbac0239362b0376f1ada","name":"MC-Fastpack 2300 top","short_description":"Ductile and flexible injection resin for the durable waterproofing of concrete and masonry","description":"<div style=\"text-align: justify;\">Two-component polyurethane injection resin of very low viscosity with high elasticity, flexible at low temperatures, with closed pore structure and permanent impermeability. Phthalate-free formulation. For elastic waterproofing injection of concrete, reinforced concrete or masonry with cracks from 0.2 mm. MC-Fastpack 2300 top in two-chamber cartridges is applied with MC-Fastpack Power-Tool.<\/div>","areas_of_applications":"<ul>\n<li>Ductile, flexible filler and sealant of cracks, construction joints and cavities in concrete and masonry under dry, water-bearing and pressurised water-bearing conditions<\/li>\n<li>Injection work in accordance with EN 1504-5, DAfStb (repair guidelines), ZTV-ING (contract guidelines for civil engineering works)<\/li>\n<li>Waterproofing of masonry against moisture penetration and rising damp<\/li>\n<li>Waterproofing of pipe and liner connections to manhole\/shaft structures of sewerage infrastructure<\/li>\n<li>Sealing injection of manhole ring joints, pipe penetrations, socket joints<\/li>\n<li>Manual application with the MC-Fastpack Power-Tool<\/li>\n<\/ul>","properties":"<ul>\n<li>Particularly low-viscosity polyurethane-based elastomer resin<\/li>\n<li>Very good injectability<\/li>\n<li>High penetration activity due to low surface tension<\/li>\n<li>Water-displacing, no foam formation<\/li>\n<li>Complete curing under dynamic loading<\/li>\n<li>High elasticity<\/li>\n<li>Durable water impermeability<\/li>\n<li>Corresponds to fire class B2 according to DIN 4102 in the injection medium<\/li>\n<li>CE conformity according to EN 1504-5: CE U(D2) W(1) (1\/2\/3\/4) (5\/40)<\/li>\n<li>General building authority approval issued by the DIBt for injection into soil and groundwater<\/li>\n<li>REACH exposure: water contact permanent, inhalation periodic, processing and application<\/li>\n<li>Environmental Product Declaration EPD<\/li>\n<\/ul>","categories":[{"key":"injection-systems","text":"Injection Systems"}],"groups":[{"key":"mc-fastpack-system","text":"MC-Fastpack System"}],"url":"injection-systems\/mc-fastpack-system\/mc-fastpack-2300-top.html"},{"id":"eb50740f1564a0144a8404ab08f8994c","name":"MC-Fastpack 2700","short_description":"Rigid sealing injection resin for concrete and masonry","description":"Two-component, low-viscosity polyurethane-based injection resin. For the force-fit sealing injection of concrete, reinforced concrete or masonry from 0.2 mm crack width. Particularly suitable for injecting foundation soil. MC-Fastpack 2700 is applied from double-chamber cartridges using the MC-Fastpack Power-Tool.","areas_of_applications":"<ul>\n<li>Sealing and reinforcing of cracked and void-rich structures made of concrete, masonry and natural stone in building construction, civil engineering, hydraulic engineering and general civil engineering<\/li>\n<li>Waterproofing of concrete and masonry<\/li>\n<li>Sealing of sheet pile and diaphragm walls<\/li>\n<li>Waterproofing of pipe and liner connections to manhole\/shaft structures of sewerage infrastructure<\/li>\n<li>Sealing injection of manhole ring joints, pipe penetrations, socket joints<\/li>\n<li>Sealing of rigid joints in buildings<\/li>\n<li>Manual application with the MC-Fastpack Power-Tool<\/li>\n<\/ul>","properties":"<ul>\n<li>Low-viscosity polyurethane-based duromer resin<\/li>\n<li>Good injectability<\/li>\n<li>Variable control of reactivity<\/li>\n<li>Water-displacing<\/li>\n<li>Limited foaming on contact with water (hard foam)<\/li>\n<li>Durable water impermeability<\/li>\n<li>High compressive and tensile strength<\/li>\n<li>Corresponds to fire class B2 according to DIN 4102 in the injection medium<\/li>\n<li>REACH exposure: water contact permanent, inhalation periodic, processing and application<\/li>\n<li>Environmental Product Declaration EPD<\/li>\n<\/ul>","categories":[{"key":"injection-systems","text":"Injection Systems"}],"groups":[{"key":"mc-fastpack-system","text":"MC-Fastpack System"}],"url":"injection-systems\/mc-fastpack-system\/mc-fastpack-2700.html"},{"id":"7c527c54ccc695ed98a72ee74debad43","name":"MC-Fastpack Injekt LE","short_description":"Expansion resin for waterproofing and increasing the load-bearing capacity of buildings and consolidating the building site","description":"Fast-reacting and fast-setting, two-component expansion resin with a mixing ratio of 1:1 by volume for increasing the load-bearing capacity and sealing the subsoil as well as for lifting structures. MC-Fastpack Injekt LE has a water-displacing effect with a high volume increase and is watertight, pressure and tension resistant and vibration damping when fully reacted. Suitable for increasing the load-bearing capacity of the subsoil under buildings and traffic areas, raising and stabilizing buildings, stopping heavy water inflows in excavations and filling cavities up to 60 cm in diameter. Suitable for injection into subsoil and groundwater. MC-Fastpack Injekt LE is processed from double-chamber cartridges using the MC-Fastpack Power-Tool.","areas_of_applications":"<ul>\n<li>Stopping extreme water leakages in structures and sewage structures<\/li>\n<li>Cavity filling up to 60 cm in diameter (without aggregate)<\/li>\n<li>Partial reinforcement of structures<\/li>\n<li>Closing penetrations and anchor holes<\/li>\n<li>Waterproofing of hydraulic structures<\/li>\n<li>Waterproofing of pipe and liner connections to manhole\/shaft structures of underground infrastructure<\/li>\n<li>Sealing injection of manhole ring joints, pipe penetrations, socket joints<\/li>\n<li>Partial increasing the load-bearing capacity of the building site<\/li>\n<li>Manual application with the MC-Fastpack Power-Tool<\/li>\n<\/ul>","properties":"<ul>\n<li>Low-viscosity polyurethane-based expansion resin<\/li>\n<li>High increase in volume, no resqueezing<\/li>\n<li>Water-displacing<\/li>\n<li>Durable water impermeability<\/li>\n<li>Pressure-resistant, dampening vibrations<\/li>\n<li>Low relaxation<\/li>\n<li>Corresponds to fire class B2 according to DIN 4102 in the injection medium<\/li>\n<li>No lasting effects on soil and groundwater according to the test principles of the DIBt<\/li>\n<li>REACH exposure: water contact permanent, inhalation periodic, processing and application<\/li>\n<\/ul>","categories":[{"key":"injection-systems","text":"Injection Systems"}],"groups":[{"key":"mc-fastpack-system","text":"MC-Fastpack System"}],"url":"injection-systems\/mc-fastpack-system\/mc-fastpack-injekt-le.html"},{"id":"6f9aade03c194b9ad9dfe6122ec85a99","name":"MC-Fastpack PR solid","short_description":"Highly reactive universal adhesive for concrete, masonry and steel","description":"Tough-elastic, dynamically stressable special adhesive for bonding concrete, steel, plastic and similar materials and for damming during injection work. MC-Fastpack PR solid is applied from double-chamber cartridges using the MC-Fastpack Power-Tool.","areas_of_applications":"<ul>\n<li>Bonding of mineral and metallic building materials as well as various plastics<\/li>\n<li>Bonding of adhesive packers for injection work<\/li>\n<li>Closing and taping of cracks and cut joints<\/li>\n<li>Closing of drill holes<\/li>\n<li>Reprofiling of surfaces<\/li>\n<li>Manual processing with the MC-Fastpack Power-Tool<\/li>\n<\/ul>","properties":"<ul>\n<li>Ready-to-use 2-component adhesive\u00a0<\/li>\n<li>trowelable, stable<\/li>\n<li>Good adhesion to mineral and metallic surfaces<\/li>\n<li>Rapid strength development<\/li>\n<li>Crack-bridging, viscoplastic<\/li>\n<li>Easy to apply by hand from double-chamber cartridges<\/li>\n<\/ul>","categories":[{"key":"injection-systems","text":"Injection Systems"}],"groups":[{"key":"mc-fastpack-system","text":"MC-Fastpack System"}],"url":"injection-systems\/mc-fastpack-system\/mc-fastpack-pr-solid.html"}]