Fine fillers and fine mortars

There are products

Products to compare


Description:
Properties:
Applications:
Downloads:

Talk to a specialist ...

Nafufill KM 103

Fine mortar for levelling of concrete surfaces

Nafufill KM 110

Fine mortar for levelling of concrete surfaces

Nafufill KM 110 HS

Highly sulphate-resistant fine mortar for levelling of concrete surfaces

Nafufill F 82 XX

Fine mortar for scratch coats

Nafufill EC 6

ECC-based fine filler

Nafufill KM 220

Fibre-reinforced repair mortar and fine mortar

Nafufill DSP

Dispersion filler

Nafufill R3 FM

Curing-free high-performance fine mortar

Nafufill EF

Extra fine smoothing filler

Nafufill KM 110 HS

high sulphate resistant fine mortar for levelling concrete surfaces

Nafufill F 82 XX

Fine mortar for scratch coats

[{"id":"710cddc42179812cfa64ada01f80bbd9","name":"Nafufill KM 103","short_description":"Fine mortar for levelling of concrete surfaces","description":"Single-component, polymer-modified, hand and wet sprayable fine filler for leveling normal and lightweight concrete. Can be used as a pore and shrinkage filler, as a scratch filler and as a surface filler. Layer thickness from \"0\" to 3 mm. Maximum grain size 0.2 mm. Very good processing properties. Can be recoated after 2-4 hours with MC-Color Flair pure, MC-Color Flair pro, MC-Color Flex pure, MC-Color Flex pro or MC-Color Flex vision and can therefore be directly re-treated. Certified to DIN EN 1504-3 for class R2 and to DIN V 18026 in the OS 4 and OS 5a structure.\n","areas_of_applications":"<ul>\n<li>PCC fine filler for non-accessible and non-driven-on concrete components, both interior and exterior<\/li>\n<li>Closing of pores, blow holes and surface roughness<\/li>\n<li>Certified according to EN 1504 part 3 for principle 3, procedure 3.1 and 3.3<\/li>\n<\/ul>","properties":"<ul>\n<li>One-component, polymer-modified<\/li>\n<li>Application by hand and wet spraying technique<\/li>\n<li>High water retention<\/li>\n<li>Resistant to de-icing salt and temperature changes<\/li>\n<li>May also be used as scratch coat as well as pore and cavity filler<\/li>\n<li>Can be overcoated with MC-Color Flair pure and pro and MC-Color Flex pure, pro and vision after approx. 3 hours<\/li>\n<li>Registered with DGNB (Code: 85ADK3)<\/li>\n<li>Tested and approved according to ZTV-ING TL\/TP BE PCC and DIN V 18026 as OS 4 and OS 5a system<\/li>\n<li>Class R2 according to EN 1504 part 3<\/li>\n<\/ul>","categories":[{"key":"concrete-repair","text":"Concrete Repair"}],"groups":[{"key":"fine-fillers-and-fine-mortars","text":"Fine fillers and fine mortars"}],"url":"concrete-repair\/fine-fillers-and-fine-mortars\/nafufill-km-103.html"},{"id":"5430b77a15c4c8660e7937f50e8087e6","name":"Nafufill KM 110","short_description":"Fine mortar for levelling of concrete surfaces","description":"One-component, polymer-modified, hand and wet sprayable fine mortar for leveling normal and lightweight concrete. Can be used as a scratch filler and surface filler. Layer thickness from 2 to 10 mm. Maximum grain size 0.6 mm. Very good processing properties. Can be painted over after 2-4 hours with MC-Color Flair pure, MC-Color Flair pro, MC-Color Flex pure, MC-Color Flex pro or MC-Color Flex vision and can therefore be directly re-treated. Certified to DIN EN 1504-3 for class R2 and to DIN V 18026 in the OS 4 and OS 5a structure.\n","areas_of_applications":"<ul>\n<li>PCC fine filler for non-accessible and non-driven-on concrete components, both interior and exterior<\/li>\n<li>Levelling of too rough surfaces<\/li>\n<li>Certified according to EN 1504 part 3 for principle 3, procedure 3.1 and 3.3<\/li>\n<\/ul>","properties":"<ul>\n<li>One-component, polymer-modified<\/li>\n<li>Application by hand and wet spraying technique<\/li>\n<li>High water retention<\/li>\n<li>Resistant to de-icing salt and temperature changes<\/li>\n<li>May also be used as scratch coat<\/li>\n<li>Can be overcoated with MC-Color Flair pure and pro and MC-Color Flex pure, pro and vision after approx. 3 hours<\/li>\n<li>Registered with DGNB (Code: 4EU5HL)<\/li>\n<li>Tested and approved according to ZTV-ING, TL\/TP BE PCC and DIN V 18026 as OS 4 and OS 5a system<\/li>\n<li>Class R2 according to EN 1504 part 3<\/li>\n<\/ul>","categories":[{"key":"concrete-repair","text":"Concrete Repair"}],"groups":[{"key":"fine-fillers-and-fine-mortars","text":"Fine fillers and fine mortars"}],"url":"concrete-repair\/fine-fillers-and-fine-mortars\/nafufill-km-110.html"},{"id":"09ba5a218fe5f358a4be1ef1e939bb72","name":"Nafufill KM 110 HS","short_description":"Highly sulphate-resistant fine mortar for levelling of concrete surfaces","description":"One-component, plastic-modified, highly sulphate-resistant, hand and wet sprayable cementitious fine mortar for leveling normal and lightweight concrete. Can be used as a scratch coat and surface filler. Layer thickness from 2 to 10 mm. Maximum grain size 0.6 mm. Very good processing properties. Tricalcium aluminate-free, high water retention capacity, low effective alkali content. Resistant to freeze-thaw and thermal shock. Can be recoated after 2-4 hours with MC-Color Flair pure, MC-Color Flair pro, MC-Color Flex pure, MC-Color Flex pro or MC-Color Flex vision and can therefore be directly re-treated. Certified according to DIN EN 1504-3 for class R2.\n","areas_of_applications":"<ul>\n<li>Levelling of excessive surface roughness<\/li>\n<li>PCC fine mortar for non-accessible and non-driven-on concrete components, both interior and exterior<\/li>\n<li>Principle 3; procedure 3.1 and 3.3<\/li>\n<\/ul>","properties":"<ul>\n<li>One-component, polymer-modified<\/li>\n<li>Hand and spray application<\/li>\n<li>High water retention<\/li>\n<li>Resistant to de-icing salt and temperature changes<\/li>\n<li>Tri-calciumaluminate-free binder, low alkali-content<\/li>\n<li>May also be used as scratch coat<\/li>\n<li>Registered with DGNB (Code: 5NUHDX)<\/li>\n<li>Can be overcoated with MC-Color Flair pure, MC-Color Flair pro, MC-Color Flex pure, MC- Color Flex pro and MC-Color Flex vision after approx. 3 hours<\/li>\n<li>Class R2 according to EN 1504 part 3<\/li>\n<\/ul>","categories":[{"key":"concrete-repair","text":"Concrete Repair"}],"groups":[{"key":"fine-fillers-and-fine-mortars","text":"Fine fillers and fine mortars"}],"url":"concrete-repair\/fine-fillers-and-fine-mortars\/nafufill-km-110-hs.html"},{"id":"bbe24c14446b5f396c27f0581818a929","name":"Nafufill F 82 XX","short_description":"Fine mortar for scratch coats","description":"","areas_of_applications":"<ul>\n<li>PCC fine filler for non-accessible and non-driven-on areas of new or existing structures, especially constructions erected in sliding formwork or climbing formwork, e.g. concrete chimneys, cooling towers, bunker, stair and telecommunication towers as well as silos<\/li>\n<li>Closing of pores, cavities and surface roughness<\/li>\n<li>Certified according to EN 1504 part 3 for principle 3, procedure 3.1 and 3.3<\/li>\n<\/ul>","properties":"<ul>\n<li>Two-component, polymer-modified<\/li>\n<li>Application by hand and wet spraying technique<\/li>\n<li>Soft, easy spread adjustment to achieve rounded concrete surfaces<\/li>\n<li>Good tolerance of changes in layer-thickness, therefore suitable for edges, disruptions and cavities<\/li>\n<li>Class R2 according to EN 1504 part 3<\/li>\n<\/ul>","categories":[{"key":"concrete-repair","text":"Concrete Repair"}],"groups":[{"key":"fine-fillers-and-fine-mortars","text":"Fine fillers and fine mortars"}],"url":"concrete-repair\/fine-fillers-and-fine-mortars\/nafufill-f-82-xx.html"},{"id":"ecbed532b2f787c9cc4ef8515dc783e9","name":"Nafufill EC 6","short_description":"ECC-based fine filler","description":"The two-component, cement-bound ECC fine filler is made from the components Nafufill EC 6 (powder) and MC Additive EC (liquid), whereby Nafufill EC 6 can be used as a scratch and shrinkage filler as well as a full-surface filler up to 6 mm thick in vertical and overhead areas. The ECC fine filler can also be recoated with solvent-based reactive resin systems after 24 hours. Certified according to DIN EN 1504-3.","areas_of_applications":"<ul>\n<li>Scratch and leveling coats<\/li>\n<li>Full area coating up to a layer thickness of 6 mm<\/li>\n<li>Protects against back-bearing moisture penetration from a layer thickness of 3 mm in accordance with WTA leaflet 4-6<\/li>\n<li>ECC fine filler for non-accessible and non driven-on areas, both interior and exterior, especially suitable as filling under coats containing reactive resins<\/li>\n<li>Certified according to EN 1504 part 3 for principle 3, procedure 3.1 and 3.3<\/li>\n<\/ul>","properties":"<ul>\n<li>Temperature, frost and de-icing salt resistant (XF4)<\/li>\n<li>ECC fine filler for cement-bound substrates<\/li>\n<li>Easy application<\/li>\n<li>Processing by hand and spray application<\/li>\n<li>No curing required, in accordance with VGB Guideline R612U (2010)<\/li>\n<li>Can be overworked quickly with reactive resins<\/li>\n<li>Starter liquid MC-Additiv EC<\/li>\n<li>Can be painted over with MC-Color Flair pure and MC-Color Flair pro in the OS 4 system structure<\/li>\n<li> <\/li>\n<\/ul>","categories":[{"key":"concrete-repair","text":"Concrete Repair"}],"groups":[{"key":"fine-fillers-and-fine-mortars","text":"Fine fillers and fine mortars"}],"url":"concrete-repair\/fine-fillers-and-fine-mortars\/nafufill-ec-6.html"},{"id":"7633a3e65e414fc2af770249f654b09c","name":"Nafufill KM 220","short_description":"Fibre-reinforced repair mortar and fine mortar","description":"Single-component, polymer-modified, fiber-reinforced, cementitious, hand and wet sprayable repair mortar for the reprofiling of break-out areas, for increasing the concrete cover and for fine mortar work from 2 mm layer thickness. Can be applied without bonding bridge. Resistant to temperature, frost and de-icing salt. Low fresh mortar bulk density, low consumption. Non-combustible, in accordance with DIN EN 13501-1 building material class A1. Maximum grain size up to 1 mm. For layer thicknesses from 2 to 30 mm. For break-out areas up to 50 mm. Certified according to DIN EN 1504-3 for class R2. \n","areas_of_applications":"<ul>\n<li>Repair of fractured or broken areas in concrete, application of levelling layers and fine mortaring works > 2 mm<\/li>\n<li>Suitable for partial and full-surface application onto normal-, lightweight- and chipped brick concrete in civil engineering, industrial- and housing construction<\/li>\n<li>For exposure classes XALL, XO, XA1, XC1-4 and XF1-4 as well as moisture classes WO, WF and WA<\/li>\n<li>Certified and classified according to EN 1504 part 3 for principle 3, procedures 3.1, 3.3, 7.1, 7.2 and 7.4<\/li>\n<\/ul>","properties":"<ul>\n<li>One-component, polymer-modified<\/li>\n<li>Hand and wet spray application<\/li>\n<li>May be applied without bond coat<\/li>\n<li>Low fresh mortar density, low consumption<\/li>\n<li>Resistant to temperature, frost-thaw and de-icing salts<\/li>\n<li>High carbonation resistance<\/li>\n<li>Increased bonding capacity<\/li>\n<li>Suitable for wall and overhead areas<\/li>\n<li>Layer thickness 2 - 30 mm<\/li>\n<li>Excellent application properties<\/li>\n<li>Registered with DGNB (Code: EMUSRA)<\/li>\n<li>Non-flammable according to EN 13501-1 - building material class A1<\/li>\n<li>Class R2 according to EN 1504 part 3<\/li>\n<\/ul>","categories":[{"key":"concrete-repair","text":"Concrete Repair"},{"key":"concrete-repair","text":"Concrete Repair"}],"groups":[{"key":"fine-fillers-and-fine-mortars","text":"Fine fillers and fine mortars"},{"key":"concrete-replacement","text":"Concrete replacement"}],"url":"concrete-repair\/fine-fillers-and-fine-mortars\/nafufill-km-220.html"},{"id":"ce2e5468398dbdf48b81f3f155c42b9b","name":"Nafufill DSP","short_description":"Dispersion filler","description":"Ready-to-use, hand and spray-applied dispersion filler based on an aqueous acrylate dispersion. No post-treatment required, open to water vapor diffusion and sandable. Can be painted over with MC-Color Flex pure, MC-Color Flex pro and MC-Color Flex vision. Can be used on concrete, lightweight concrete, porous lightweight concrete and firmly adhering old coatings to close pores and cavities as well as for thin fillers up to a maximum of 1 mm. Certified in accordance with DIN EN 1504-2 and DIN V 18026. \n \n","areas_of_applications":"<ul>\n<li>Suitable on concrete, lightweight concrete, porous lightweight concrete and adherent old coatings<\/li>\n<li>Filling of pores and blowholes<\/li>\n<li>Thin-layer filling up to max. 1 mm<\/li>\n<li>REACH-assessed exposure scenarios: periodical water-contact, periodical inhalation, application<\/li>\n<li>Certified in accordance with EN 1504 part 2 for principles 1, 2 and 8, procedure 1.3, 2.2, 8.2<\/li>\n<\/ul>","properties":"<ul>\n<li>Water-based acrylate dispersion<\/li>\n<li>Ready-to-use, paste-like consistency, dilutable with water up to 10 %<\/li>\n<li>Open to water vapour diffusion and carbonation-retarding<\/li>\n<li>Curing-free<\/li>\n<li>Grindable<\/li>\n<li>Can be overcoated with MC-Color Flair pure, MC-Color Flair pro, MC-Color Flair vision, MC- Color Flex pure, MC-Color Flex pro and MC-Color Flex vision<\/li>\n<li>Application by trowel and spraying<\/li>\n<li>Registered with DGNB (Code: W2C16U)<\/li>\n<li>Tested and approved as OS 5a surface protection system<\/li>\n<\/ul>","categories":[{"key":"concrete-repair","text":"Concrete Repair"}],"groups":[{"key":"fine-fillers-and-fine-mortars","text":"Fine fillers and fine mortars"}],"url":"concrete-repair\/fine-fillers-and-fine-mortars\/nafufill-dsp.html"},{"id":"08f19a1eaa75943f894bf7d0fcefcf10","name":"Nafufill R3 FM","short_description":"Curing-free high-performance fine mortar","description":"Post-treatment-free in accordance with VGB Guideline R 612 U (2010) Section 9.3.2Two-component, polymer-modified fine mortar that can be applied by hand and wet spraying. Can be used as a porous, shrinkage, scratch and surface filler. Particularly soft, easy to apply consistency, making it easy to apply with high area coverage. High resistance to carbonation and water retention, resistant to temperature, frost and de-icing salt, non-combustible, building material class A2-s1, d0 according to EN 13501-1 (system test), mortar class R3 according to EN 1504, part 3.","areas_of_applications":"<ul>\n<li>Fine mortar to level and even out concrete surfaces in building construction an civil engeneering<\/li>\n<li>Tested and certified as OS4 system with MC-Color T 21 and MC-DUR 2496 CTP (MC-Color Flair pure, MC-Color Flair pro)<\/li>\n<li>Curing-free fine mortar for structures such as cooling towers and chimneys in combination with MC-Color surface protection systems<\/li>\n<li>Certified in accordance with EN 1504 part 3 for principle 3, procedure 3.1 and 3.3.<\/li>\n<li>Fulfils the requirements according to Astra guideline \u201eTunnel Coating Systems and Colour Design\"<\/li>\n<li>Fulfils the requirements according to \u00d6BV guideline \u201eTunnel Coatings\"<\/li>\n<\/ul>","properties":"<ul>\n<li>Curing-free fine mortar according to VGB Guideline R 612 U (2010) Paragraph 9.3.2.<\/li>\n<li>Two-component, polymer-modified fine mortar<\/li>\n<li>Application by hand and wet spraying technique<\/li>\n<li>Soft, easy-to-spread consistency<\/li>\n<li>May be used as pore filler, scratch coat and surface filler<\/li>\n<li>High carbonation resistance and water retaining capability<\/li>\n<li>Resistant to elevated temperatures, frost and de-icing salts (XF4)<\/li>\n<li>Class R3 according to EN 1504 part 3<\/li>\n<li>Registered with DGNB (Code: ZS7YTZ)<\/li>\n<li>Non-flammable, building material class A2-s1, d0 according to EN 13501-1<\/li>\n<\/ul>","categories":[{"key":"concrete-repair","text":"Concrete Repair"}],"groups":[{"key":"fine-fillers-and-fine-mortars","text":"Fine fillers and fine mortars"}],"url":"concrete-repair\/fine-fillers-and-fine-mortars\/nafufill-r3-fm.html"},{"id":"f7bfceeced8a6f5ecd5ae11ccd80ce89","name":"Nafufill EF","short_description":"Extra fine smoothing filler","description":"Single-component, highly polymer-modified mineral smoothing filler. Can be used as pore and cavity filler, as scratch filler and surface filler up to 1 mm layer thickness. Can be applied at air and substrate temperatures of 5 - 30\u00b0C. Extremely high water retention capacity. Sandable, resistant to freeze-thaw and thermal shock. Can be used on normal concrete, lightweight concrete, plasterboard and all cementitious substrates. In combination with MC-Estribond uni for filling over old tile coverings. Certified to DIN EN 1504-3 for class R1 and to DIN V 18026 in the OS 4 and OS 5a structure.","areas_of_applications":"<ul>\n<li>Fine filling of wall and ceiling surfaces<\/li>\n<li>Roughness leveling<\/li>\n<li>Closing pores and cavities<\/li>\n<li>Filling over old tile coverings in combination with MC-Estribond uni<\/li>\n<li>Hybrid filler for concrete components of new and existing buildings that cannot be walked on or driven over, can be used both indoor and outdoor applications<\/li>\n<li>Filling and smoothing of board joints in plasterboard, gypsum fibre and gypsum wallboards<\/li>\n<li>Can be used on normal concrete, lightweight concrete and sand-lime brick as well as on all mineral cementitious substrates<\/li>\n<li>Certified according to EN 1504 Part 3 for Principle 3 as well as Methods 3.1 and 3.3<\/li>\n<\/ul>","properties":"<ul>\n<li>Polymer-modified mineral filler<\/li>\n<li>One-component<\/li>\n<li>High water retention<\/li>\n<li>Suitable for wet rooms<\/li>\n<li>Application by hand<\/li>\n<li>Grindable<\/li>\n<li>Resistant to freeze-thaw and temperature changes<\/li>\n<li>For producing surfaces of quality levels Q1 - Q4<\/li>\n<li>Can be used as levelling, scratch, pore and shrinkage filler<\/li>\n<li>Can be overpainted with MC-Color LE, MC-Color Flair pure, MC-Color Flex pure and MC-Color T 21<\/li>\n<li>Registered with DGNB (Code: I39MD0)<\/li>\n<li>Class R1 according to EN 1504 Part 3<\/li>\n<\/ul>","categories":[{"key":"concrete-repair","text":"Concrete Repair"}],"groups":[{"key":"fine-fillers-and-fine-mortars","text":"Fine fillers and fine mortars"}],"url":"concrete-repair\/fine-fillers-and-fine-mortars\/nafufill-ef.html"},{"id":"c356c535d1cb96592b683187962dbdaa","name":"Nafufill KM 110 HS","short_description":"high sulphate resistant fine mortar for levelling concrete surfaces","description":"","areas_of_applications":"<ul>\n<li>PCC fine mortar for indoor and outdoor pedestrian and vehicular traffic barriers in new and existing concrete structures<\/li>\n<li>for levelling areas with excessive roughness depth<\/li>\n<li>Qualification according to EN 1504 Part 3, Principle 3 and Procedures 3.1 and 3.3<\/li>\n<\/ul>","properties":"<ul>\n<li>one-component; repaired with plastic<\/li>\n<li>can be applied by hand and by spray<\/li>\n<li>good water retention<\/li>\n<li>resistant to freeze-thaw cycles and temperature fluctuations<\/li>\n<li>binder without tricalcium aluminate, low effective alkali content<\/li>\n<li>can be used as a scratch levelling coat<\/li>\n<li>can be coated after 3 hours with MC-Color Flair pure, MC-Color Flair pro, MC-Color Flex pure, MC-Color Flex pro and MC-Color Flex vision<\/li>\n<li>R2 classification according to EN 1504-3<\/li>\n<\/ul>","categories":[{"key":"concrete-repair","text":"Concrete Repair"}],"groups":[{"key":"fine-fillers-and-fine-mortars","text":"Fine fillers and fine mortars"}],"url":"concrete-repair\/fine-fillers-and-fine-mortars\/nafufill-km-110-hs.html"},{"id":"805156f7ccadfd527c76cfa7cc8c217f","name":"Nafufill F 82 XX","short_description":"Fine mortar for scratch coats","description":"","areas_of_applications":"PCC fine filler for non-accessible and non-driven-on areas of new or existing structures, especially constructions erected in sliding formwork or climbing formwork, e.g. concrete chimneys, cooling towers, bunker, stair and telecommunication towers as well as silos. Closing of pores, cavities and surface roughness. Certified according to EN 1504 part 3 for principle 3, procedure 3.1 and 3.3.","properties":"Two-component, polymer-modified Application by hand and wet spraying technique Soft, easy spread adjustment to achieve rounded concrete surfaces Good tolerance of changes in layer-thickness, therefore suitable for edges, disruptions and cavities Class R2 according to EN 1504 part 3","categories":[{"key":"concrete-repair","text":"Concrete Repair"}],"groups":[{"key":"fine-fillers-and-fine-mortars","text":"Fine fillers and fine mortars"}],"url":"concrete-repair\/fine-fillers-and-fine-mortars\/nafufill-f-82-xx.html"}]