Concrete Repair

With the PCC and SPCC concrete replacement system from MC, you can be sure of meeting any challenge, whether in reinstating corrosion protection, achieving a structural upgrade or providing fire protection.

Concrete Repair

Concrete is the backbone of modern infrastructure and it has wide applications ranging from powerplants and airports to residential buildings and commercial skyscrapers. Each application brings its own set of problems associated with its use, in addition to the usual problems influenced by environmental exposures and pollution. Depending on your location and market standards, MC-Bauchemie’s tailored range of concrete repair mortars fulfil each of your requirement – suited to your local market, environment and quality standards.

Products

Nafufill Range of Repair Mortars

The Nafufill range of repair mortars cover all the possible applications prescribed by EN 1504-3, precisely from R1 through R4 type mortars, including corrosion protection and bonding agents. In addition to this, MC-Bauchemie also offers specialised repair mortars, for example: Nafufill KM 180 for horizontal areas and the Nafufill KM 250 HS for areas with high sulphate exposure.

Bestsellers

Nafufill KM 110 Fine mortar for levelling of concrete surfaces

Nafufill KM 220 Fibre reinforced fine cement mortar

Nafufill KM 250 Fire-resistant, fibre reinforced PCC-concrete replacement for repair of concrete components in statically and non-statically relevant areas

System Set-Up

1. Corrosion Protection

Corrosion protection materials, such as Nafufill KMH, are applied on cleaned and prepared reinforcement bars to protect them against contaminants, especially chlorides.

2. Bonding Agent

Bonding agents enhance the adhesive bond between the original substrate and the applied repair mortar and reduce chances of sagging or debonding, especially when working on vertical or overhead areas.

3. Concrete Repair

4. Fine fillers

Fine filler mortars can be used as a final thin layer to smoothen the concrete surface, level and fill pores and blowholes or prepare the surface for a consequent surface protection coating.

Select a Product Subcategory

Understanding the exposures as well as the minute details of application have helped us design repair mortars, which offer not only the optimal performance but are also suited to your application constraints and structure downtimes.

Corrosion protection

Our cement-bound corrosion protection coatings offer you short application times, ensuring fast and cost-efficient implementation of your entire…

Fine fillers and fine mortars

You can seal pores, pitting and blowholes, smooth rough areas and provide full-surface finishes using our fine fillers and mortars, based on…

Bonding coats

MC bonding coats not only improve the adhesion of ageing concrete, they are also suitable for horizontal, vertical and overhead working, ideally…

Concrete replacement

With the concrete replacement systems from MC, no task is too great. Whether for manual trowelling or spray application on a horizontal, vertical…

Mechanical

Abrasion or fatigue caused by repeated mechanical impact can cause changes in the physical geometry of exposed concrete surfaces. Causes can be fatigue, overload or movement and settlement of structures.

Chemical

Exposure to aggressive chemicals such as acids, sulphates or aggressive agents directly affects concrete, resulting in extreme and quick loss of concrete cover.

Physical

Freeze-thaw and thermal effects caused by extreme temperature changes can lead to ingress of water and pollutants through cracks and cavities.

Biological action

Algae / Vegetation growth in porous concrete can lead to degradation of aesthetic appearance as well as root penetration, which can increase crack width and substantially accelerate concrete degradation.

Carbonation

Various factors such as incorrect water to cement ratio, curing problems or insufficient protection from humidity can lead to carbonation. Rusting and expansion of reinforcement and the resulting spalling of concrete are typical physical indicators.

Sea Water / Chlorides

Ingress of seawater or salts through cracks and cavities can lead to pitting corrosion of concrete reinforcement. This is particularly dangerous to the structural integrity of concrete as there are seldom visible precursors.

Benefits

MC-Bauchemie’s long-term and global experience in rehabilitation of concrete structures has ensured tailored and high-end solutions which can resist multiple exposures and avoid further deterioration of concrete. With MC-Bauchemie’s concrete repair systems you can refurbish your structure, increase its physical and chemical resistance, protect the reinforcement, strengthen the structure and thus, restore or extend its life cycle. And your benefits do not just end there.

EN 1504

MC’s concrete repair systems fully conform to the stringent technical requirements, methods and principles of concrete repair according to the EN 1504-3:2005.

Quality

Our high performance repair mortars are manufactured under stringent quality standards conforming to ISO 9001:2015, ensuring our customers get the best products, always.

Long-term experience

Due to our long experience and intense dialogue with customers, our repair materials have been developed to not only meet but also exceed the intense demands of application, performance and life expectancy.

Tailored system solutions

Depending on the exposures to your structure, MC offers a wide variety of system solutions to reliably repair and protect it from future damages.

Certifications

In addition to the requirements of EN 1504-3, repair mortars from MC-Bauchemie are also certified for additional properties such as fire resistance and sulphate resistance which inspires confidence amongst all stakeholders involved.

Global solutions, delivered locally

With almost 20 manufacturing sites all across the globe, MC-Bauchemie’s system solutions can be delivered swiftly and sustainably to your jobsite!

Applications

Concrete structures are very diverse in terms of the exposures faced, the criticality of the structure, frequency of use as well as the time available for rehabilitation. You want to see where our products are applied? Then, use your mouse to zoom into the illustration.